r/Lighting • • 7h ago

Need Design Advise CHANGING LAMP SOCKET FROM 3 WAY TO ON/OFF- Looking for High lumen, High R9 & High CRI, 2700K Dimmable- A type bulb- for bedroom lamp that is primary source of lighting. Cant find one - suggestions?

0 Upvotes

We have 2 more lamps in bedroom ( 1 Tala lamp which is only for mood lighting and bedside or reading lamp) which are low lumens/ warm to dim & are used when bright light is not needed.

For the third lamp that we rely on for bright light, we are changing the socket from a 3 way to on/off because i want a dimmable bulb.

Waveform does not have a dimmable 2700K type A bulb.

Tala does not.

Soraa Vivid has A19 which is i have in my living room lamps but theyre not high lumen.

Soraa Brilliant does not make A19 or A21 bulbs.

Yuji has a dimmable A19 - 1000 lumen (looking for more), 2700K bulb They say R9 "upto" 95.

Yuji's A21 with 1600 lumens is not dimmable.

Emery Allen has low lumens in their A bulbs.

What we use currently in that lamp: 3 way bulb 2700K- GE 650/1500/2155 LUMENS. The problem with this is that i really dislike turning it up from 650 to 1500 to 2155 before i can turn it off from the socket. I'd like a dimmer on the table that i can slide up and down.


r/Lighting • • 1h ago

Need Design Advise DIY linear polarised light

Thumbnail
gallery
1 Upvotes

Hey all! Need some help or suggestions to attach a linear polarising film sheet to my ring light for product photography with my camera that has a Cpl lense.

In the past I’ve use these self adhesive sheets to smaller lights for a permanent application but my new light is a 22” ring light and it seems the heat is warping the film and falling off because of the energy output of my light.

If I use tape it affects the light and I don’t really want to use a glue/adhesive as I’d like the option to remove it when necessary (rarely though) and it just doesn’t look professional with the glue adhesive visible through the film. Plus that doesn’t really solve the warping issue.

Has anyone got some suggestions to help me solve this?

*I’ve thought about making some type of clear casing that can attach to the ring light either with clips or magnets which houses the film (mimicking the white diffuser casing of the ring light) but I’m not sure how to go about making it or what types of materials to use without reducing the light output or interfering with the linear polariser . I need the centre of the ring light to still have the hole to access when taking photos.

Any help would be greatly appreciated in dumbed down language for someone who’s not very knowledgeable in the field! TIA


r/Lighting • • 11h ago

Designer Thoughts What happened to LightFair? Quick answer, plus a look back at 2025

3 Upvotes

r/Lighting • • 21h ago

Find Me This Fixture What kind of light bulb is that?

Post image
3 Upvotes

Spotted today in a local store. What is that. It's got fins on its side and doesnt illuminate at the same brightness across the surface.