r/Linksys • • May 29 '26

❓HELP Smart Wifi Down?

Post image
7 Upvotes

Went to login and this is what I see instead of the web UI. Smartphone app still works. Anyone else seeing this? I have two MX6200 nodes. Bridge mode is not in use. Trying to login to my router locally just results in a solid blue webpage. Internet is working normally. Just can't do any admin stuff without the app.

Solution Credit u/Keith15335 & u/Regular_bypasser25

  • 1: Disable any browser privacy protections and ad blockers for 191.168.1.1 and linksyssmartwifi.com. Clear all website data (cookies, cache, etc.) for these two websites from your browser.

    • 1a: Try it now
    • 1b: If that didn't work, try steps 2-4.
  • 2: Unplug the WAN cable from your Linksys Router & shut down your Router/Parent Node and any satellite nodes.
  • 3: Restart the Router/Parent Node, connect to it via LAN, and go to 192.168.1.1
  • 4: The webpage may take a minute to load. You may be prompted to reset your admin password. Once the webpage loads, you may reconnect your WAN cable. You should now be able to access your router via 192.168.1.1 or linksyssmartwifi.com again. You may restart any Satellite nodes.

Note: Remote access via linksyssmartwifi.com does not seem to work. Only my mobile app seems to be able to remotely monitor the network even after these steps. When outside of the network, I get a new webpage that says, "Trying to reach Linksys Now?"

Edit 6/5/26: linksysmartwifi.com has been discontinued per https://support.linksys.com/kb/article/9634-en/ Remote router access is still available via the Linksys Mobile app for models not on the list of dropped support. For models on the list of dropped support, local access via 192.168.1.1 is required for router management and setup via the app is not supported.


r/Linksys • • May 23 '24

Welcoming new members to the official Linksys Community!

6 Upvotes

r/Linksys • • 2d ago

I just got community fibre internet, and I have a two node system. The main one, which is wired to a second booster downstairs, for optimal coverage. There are no connectivity issues, but all the time the second router is being rate limited to 100mbps. I have a 2Gbps package. Node model MC60-EU. Why

1 Upvotes

r/Linksys • • 2d ago

❓HELP LGS108-UK V2 – No MAC address on the device, registration form requires one, and support chatbot told me to enter zeroes

1 Upvotes

Hi everyone,

I recently bought a Linksys LGS108-UK V2 8-port Gigabit switch through Amazon.

The serial number on the device matches the box, and Linksys' website recognised it correctly as an LGS108-UK when I checked it.

I wanted to register the product, so I went to the official Linksys registration page:

https://support.linksys.com/kb/article/8986-product-registration/

However, the form requires a MAC address. There is no MAC address printed on the sticker underneath the switch. The box has a separate white sticker labelled "MAC", but that field is completely blank as well.

I contacted the Linksys support chatbot to ask how I should proceed. The conversation was rather frustrating:

Initially, the bot told me that unmanaged switches don't have a MAC address and that there was nothing to register.

When I explained that the registration form wouldn't let me continue without one, it acknowledged that the form apparently wasn't designed for unmanaged switches.

It suggested entering "N/A", but the form rejected that.

I explained this again, and the bot then suggested trying 00:00:00:00:00:00.

Surprisingly, the form accepted it, so I followed the chatbot's advice and submitted the registration.

However, I haven't received any confirmation email yet, so I don't know whether the registration was actually successful or whether I've simply entered a placeholder into their system.

I also asked about the UK warranty. The chatbot couldn't give me a clear answer and directed me to the support page, which offers only two contact options for the UK: telephone support or Reddit. I would much rather resolve this in writing.

So I have a few questions:

Is entering 00:00:00:00:00:00 an accepted procedure for registering an unmanaged LGS108 switch, or was that simply a workaround suggested by the chatbot?

Is there any way to verify whether my registration was successful?

Does the LGS108-UK V2 carry a five-year manufacturer's warranty in the UK?

I'm not trying to make a big deal out of this. I simply bought a Linksys product, wanted to register it properly and establish the warranty coverage, and somehow a straightforward five-minute task has turned into a rather confusing experience.

I'd appreciate some clarification from someone familiar with Linksys products or, ideally, an official Linksys representative.

Thanks!


r/Linksys • • 3d ago

Please reconsider planned obsolescence

10 Upvotes

Subject: Request to Restore Mobile App Management for MX5300 Through Published Support Lifecycle

I am writing to express my disappointment with Linksys's recent decision to discontinue mobile app management for the MX5300 Velop mesh router.

I own Linksys MX5300 equipment that continues to operate properly. The routers provide reliable Wi-Fi connectivity, maintain their mesh network, and continue to perform their fundamental networking functions. However, following the recent firmware update, the Linksys mobile app no longer provides the management functionality that I previously relied upon.

I understand that Linksys has discontinued its Smart WiFi cloud services for selected older products. However, eliminating cloud-based remote access is fundamentally different from eliminating mobile app management when the user is connected directly to the local network.

The Linksys cloud app was the defining feature that prompted my decision to purchase Linksys products over competing products. The convenience and functionality of managing my network through the mobile app were important factors in my purchasing decision. Removing that functionality significantly diminishes the value and user experience of a product that remains fully functional from a networking standpoint.

My MX5300 is still functional, receives firmware updates, and is listed by Linksys as having an End of Support date of November 4, 2028. It is therefore difficult to understand why management functionality would be removed nearly two years before the published support lifecycle ends.

This decision effectively reduces the usability of otherwise functional hardware and encourages customers to replace equipment that has no technical reason to be discarded. From both a consumer and environmental perspective, this is an unnecessary outcome.

I respectfully request that Linksys consider one of the following:

  1. Restore local mobile-app management for the MX5300, even if remote cloud access is permanently discontinued.
  2. Provide a simplified local-only mobile application for supported routers.
  3. Maintain the existing mobile management functionality through the published End of Support date of November 4, 2028.
  4. Clearly explain why local app management cannot be maintained independently of the discontinued cloud services.

I currently do not intend to purchase Linksys products again as a result of this decision. This loss of functionality has significantly diminished my confidence in Linksys and its commitment to customers who purchase its products.

However, I would reconsider that position if Linksys demonstrated a more reasonable approach to product lifecycle management. Specifically, if Linksys coordinated the discontinuation of cloud-based management services with the end of firmware and security support for the affected products, it would restore confidence that customers can reasonably expect the functionality they purchased to remain available throughout the manufacturer's supported lifecycle.

Customers who purchase networking equipment reasonably expect their hardware to remain fully functional during the manufacturer's published support period. The continued availability of firmware and security updates is appreciated, but it does not fully compensate for the removal of functionality that was a defining feature of the product and a significant factor in the original purchasing decision.

I encourage Linksys to reconsider this decision and adopt a more customer- and environmentally-responsible approach to product lifecycle management.

Thank you for considering this request. I would appreciate a response explaining whether Linksys is willing to reconsider local mobile-app management for the MX5300 and whether the company has any plans to align the discontinuation of cloud services with the published end of firmware and security support.

Sincerely,

A Linksys customer


r/Linksys • • 3d ago

Test help wanted: FreshTomato Experimental support for Linksys EA6500 v1 (MIPS)

Thumbnail linksysinfo.org
2 Upvotes

Developers at the FreshTomato open source router firmware project have released test builds for the Linksys EA6500 v1. So if you want to add new features, patch security problems, and generally give your router a more up-to-date feel with an easy intuitive interface, you might want to give this a try.


r/Linksys • • 5d ago

Velop app (3.6.0) can't manage bridge-mode mesh since Oct 2026 firmware update - "no internet connection", but network is fine

4 Upvotes

Setup: 7-node Velop mesh in bridge mode behind a third-party firewall/DHCP server.

- 2x MX5300 (fw 1.1.12.216960, auto-updated on 28 Oct 2026)

- 2x MX42FM / MX4200-series (fw 1.0.13.210200)

- 3x WHW03 v2 (fw 2.1.20.216892)

All nodes show "up to date", automatic updates on.

Since the 28 Oct auto update (and after the Smart WiFi cloud shutdown described in KB 9634), the Linksys app on iOS (version 3.6.0) no longer manages the mesh:

  1. Login with the router admin password is accepted (wrong password is correctly rejected).
  2. The dashboard appears for 1-2 seconds.
  3. Then the app says the network has no internet connection (translated from the Portuguese UI) and offers to "add a new network".
  4. Entering the WiFi password there does nothing; "Finish" opens an empty dashboard.

Reinstalling the app did not help. The admin password was reset locally with the recovery key (no factory reset); the node stayed in bridge mode.

What works: internet on all clients, local web UI on the primary node, firmware page shows all 7 nodes, sysinfo.cgi shows all backhauls up.

Questions:

  1. After the cloud shutdown, is the app still supposed to manage an affected mesh (MX5300 / WHW03) locally, or is the local web UI now the only management option?
  2. Could bridge mode be the trigger (the app checking internet through the node's own WAN)?
  3. Has anyone seen this exact sequence and found a fix?

Thanks.


r/Linksys • • 6d ago

Recyclage d'un WRT1900AC

1 Upvotes

Bonjour à tous,

Je suis en possession d'un routeur WRT1900AC et je cherche à le faire fonctionner...

J'ai deux solutions en tête :
- Soit je fais un Hard Reset et je le re configure comme j'en ai envie
- Soit j'installe OpenWRT dessus et je le configure comme j'en ai envie.

Le point commun des deux méthodes, c'est que je configure comme j'en ai envie. La première option est donc la plus simple à première vue... sauf que j'ai du tenter une bonne 30aine de Hard Reset, il semble que le mot de passe administrateur ne soit pas réinitialisé : je n'arrive pas à me connecter pour faire la configuration, soit le routeur veut absolument se connecter à internet pour passer par un compte Linksys (via Linksys Smart Wifi qui semble être un service qui a été arrêté), soit il me demande un mot de passe que je n'ai pas...

Pour la seconde méthode, ben il faut un accès à l'interface, donc je tourne en rond...

Help Please 😰


r/Linksys • • 6d ago

Hi guys please help

Thumbnail reddit.com
1 Upvotes

r/Linksys • • 6d ago

Linksys Velop MX5600 repeatedly rejects administrator password after Recovery Key reset

1 Upvotes

Hi everyone,

I’m having a very frustrating issue with my Linksys Velop MX5600 (MX56TB).

Router details:

  • Model: MX56TB / Velop MX5600
  • Firmware: 1.0.1.216589
  • App: Linksys iOS app

The problem:

I have had no problems accessing my router for years using the local Router Password login.

Recently, after troubleshooting a Home Assistant integration, I started experiencing problems accessing the router.

I have now recovered the administrator password twice using the Recovery Key printed on the router.

On both occasions:

  1. The Recovery Key was accepted.
  2. I created a new administrator password.
  3. The Linksys app accepted the new password.
  4. I successfully accessed the router settings and viewed connected devices.
  5. After some time, the app automatically logged me out.
  6. When trying to log in again, exactly the same password was rejected as incorrect.

The web interface now displays:

“Access locked. Too many failed attempts to log in.”

I have also restarted the router, but the problem remains.

Important details:

  • My Wi-Fi network is working normally.
  • All household devices remain connected.
  • I do not have a Linksys Smart Wi-Fi account. I have always used the local Router Password option.
  • I have not performed a factory reset.

I would really like to understand why the router accepts a newly recovered password and then apparently stops recognising it.

Has anyone experienced this issue with a Velop MX5600? Is this a known firmware or authentication problem?

I would appreciate advice from anyone familiar with Linksys MX series routers, particularly a solution that does not require a factory reset.

Thank you.

Kris


r/Linksys • • 7d ago

Recently got toob 2.3gbps which came with Linksys router and cannot connect to the app whatever I do it still keeps looping on the router password page. I have rebooted, unplugged,reset, deleted app and reinstalled and still the same thing. Can anyone help.

Post image
3 Upvotes

r/Linksys • • 7d ago

❓HELP Mr96000 dropping

0 Upvotes

I got this router in March and it worked perfectly up until a few weeks ago where it started dropping. It’s now dropping very frequently. Nothing has changed in terms of devices or location of the router or anything. I have tried every troubleshooting step I can think of. (Factory reset, unplugging and replugging, channel finding, turned off client and node steering etc) and it’s still happening and I have no idea how to isolate it. I unplugged the power supply from the surge protector and went directly into the outlet and still nothing. My educated guess would be a thermal issue or power supply problem, but I just got it in March that seems pretty quick to have those kinds of issues. Is there a way to isolate my problem? I’m losing my mind!


r/Linksys • • 8d ago

Linksys Parental Controls

1 Upvotes

Hello all

Has anyone had any success with the Parental Controls? They appear to do absolutely nothing in my tests so far.

Previously used Google/Nest and that worked very well but I couldn't be arses to have more hardware. But suspect I shall have to .


r/Linksys • • 12d ago

Best current Linksys router to use with two WHW01 nodes?

1 Upvotes

Hi everyone,

I currently have a Linksys Velop mesh system with three WHW01 (AC1300) nodes.

One of the secondary nodes has failed, so I now have:

  • 1 WHW01 as the main router, connected to the modem via Ethernet
  • 1 WHW01 secondary node connected wirelessly
  • 1 failed WHW01

My internet connection is 400 Mbps.

Instead of buying another old WHW01, I would like to upgrade the main router to a newer Linksys model and reuse my two remaining WHW01 units as wireless child nodes.

I have been looking at:

  • LN1101
  • MX6201
  • MBE7001

Linksys has an official support article explaining how to add Intelligent Mesh child nodes to a Cognitive Mesh parent in a mixed network, so theoretically this should work.

However, some other Linksys FAQ pages still say Intelligent Mesh and Cognitive Mesh are not compatible, so the documentation seems contradictory.

Has anyone actually used WHW01 nodes as child nodes with an LN1100, MX6200, or MBE7000 as the parent router?

I am especially interested in:

  • Stability
  • Wireless backhaul performance
  • Setup process
  • Any firmware issues
  • Whether roaming still works properly
  • Which current model you would recommend for a 400 Mbps connection

I am also trying to buy a brand-new unit, not Amazon Renewed/refurbished.

Thanks!


r/Linksys • • 12d ago

LN2305ISNOTWORKINGSELLERISSAYINGNEEDTOCONTACTMANUFACTER

0 Upvotes

COUPLEMONTHSBACKIBOUGHTALN2305INITIALLYWORKEDPERFECT.AFTER3MONTHSITSNOTWORKINGTHESTOREMANAGERTOLDINEEDTOCONTACTMANUFACTER.ILIVEINPANAMACENTRALAMERICA..


r/Linksys • • 14d ago

Linksys Hydra Pro 6E Tri‑Band WiFi 6E Mesh Router

2 Upvotes

Does Linksys Hydra Pro 6E Tri‑Band WiFi 6E Mesh Router allow custom DDNS configuration to use DyNu and other services or are they just a dumb router like those from TP-Link that ties you to use their servers for such things? I am looking for a router that can allow me to configure this so that I can host my own website.

Alternatively please suggest something to achieve this.

Thank you.


r/Linksys • • 16d ago

❓HELP Will router external disk sleep?

2 Upvotes

I have a mx4000 router with an 8tb external disk plugged into it.

Will it sleep when not in use or will the router keep it awake?

Currently I just safely eject and power down when not in use but that's a pain having to login each time..

Eject used to be in the app but they removed it. Grrr.


r/Linksys • • 17d ago

Outdoor node

2 Upvotes
  1. What mesh node can I purchase that I can use outside to extend the wifi to my garage? I have a node in the garage but very week signal.

r/Linksys • • 18d ago

❓HELP Velop Pro 7: Wi-Fi clients on the main node can't reach a device for ~20 s after it roams to the satellite

1 Upvotes

Two Velop Pro 7 (MBE7000), firmware 1.0.14.216607 (latest), wired backhaul, main node in router mode behind my ISP box.

Symptom: when my iPhone walks from the main node to the satellite, my Mac (on the main node's 5 GHz Wi-Fi) can't reach it for about 19 seconds. Walking back to the main node: no gap. It's very consistent: 19.1, 19.7, 18.6 and 18.7 s.

What I measured: I pinged the phone every 0.5 s from the Mac and lined the results up with both nodes' sysinfo.cgi logs (node clocks match the Mac's to the second):

- 12:01:45 – satellite log: phone associates (`client_associated`)

- 12:01:45.3 – pings stop

- 12:02:04 – main node log: receives the mesh status message for the phone (network/master/WLAN/subdev/<phone-mac>/status)

- 12:02:03.96 – pings resume

So the blackout lasts exactly from the association on the satellite until the main node gets the mesh update. My guess is the main node keeps delivering the phone's frames on its own radio until then.

Tried: restarting both nodes, Client Steering on and off. No change.

Anyone else seeing this on Velop Pro 7, or other Velop models?


r/Linksys • • 18d ago

Router indicates no connection even though there is

1 Upvotes

After every single power outage or reboot my atlas (MX20MS3) goes through the power on process and always ends up glowing red and I get no internet via wifi. Everything else connected to the modem is fine. I have to reboot the atlas several times to get it to work. I've swapped to known working cables, ports etc... The problem always follows the router. Anything I can try?

How much of a process would it be to swap the unit currently hooked to the modem router for a unit currently acting as a satellite?


r/Linksys • • 19d ago

➡️ Firmware What did firmware 1.0.4.216955 fix for the WRT1900ACS?

2 Upvotes

Had this router for years, no firmware's been released for maybe the last decade ... ?

Then mid-October, new firmware arrived. No doubt a security fix as a result of AI vulnerablity fixes, but what exactly did it fix? Any ideas?


r/Linksys • • 20d ago

LINKSYSY LAPAC1300C

1 Upvotes

Hellow guys

I am trying to remove my linksys lapac1300c from cloud server but still doesnt work out

iy says the device is already taken by another accout

any help please to do this? I have tried reset it locally but still same error


r/Linksys • • 20d ago

❓HELP Firmware Update Issues

5 Upvotes

The Firmware update has crashed my network TWICE!
After resetting using the 2 sec + 5 sec. Unplug cycle 4x I attempted the firmware update again which crashed my network again. My master node is an MX5300, but have a mix of 18 child nodes of various generations.
What needs to be done here? I reset again and am still getting the alert for a firmware update. I'd like to update, but simply can't afford the tremendous waste of my time this has been. I've lost my entire day off this Sunday trouble shooting this mess.


r/Linksys • • 20d ago

I flashed my Linksys E8450 to OpenWrt with a guide kit I built — it verifies every file and never touches your router password

Thumbnail reddit.com
1 Upvotes