r/LoomKnitting • • 6d ago

Announcement! We are (again!) expanding the r/LoomKnitting moderator team. Applications are now open!

12 Upvotes

Hey all,

It's the middle of November and I hope you've all had an amazing 2026 thus far.
I'm keeping the call for new mods fairly short this time - so, here it is: Would you be keen on helping us moderate our awesome little corner of Reddit?

I'm selfishly going to be a bit non-responsive for a couple of weeks - other than my job, Grand Theft Auto 6 is going to take up pretty much all my free time, hence the call for additional moderators around here.

The qualifications to become a moderator are very simple:

  • love loom knitting
  • use reddit

The expectations for the new moderators are to be transparent, to be communicative and to be reasonably active. I will always be clear - Real life always comes before Reddit and to just let the rest of the team know if you need a break.

> Link to the application form <

If you have any questions or doubts feel free to ask in the comments.

FAQ

  • What timezones are you looking for mods from?

    • We're looking for mods from all timezones
  • Should I apply if I applied in previous rounds or been rejected before?

    • Yes!
  • Do you need to have moderation experience?

    • No, it's not an issue if you don't have moderator experience yet.
  • What are the tasks of a moderator exactly?

    • Obviously the primary task is going through the modqueue and removing comments and posts that go against the subreddit rules. But there are other aspects like configuring automoderator, working on graphics and flairs and so on.
  • Is there any compensation for moderation?

    • Absolutely none. This is a volunteer role

Thank you and keep the great posts and comments coming!
u/SebVettel5


r/LoomKnitting • • 7h ago

Work in Progress What’s next 🎄

Post image
2 Upvotes

Will be 5ft wide and around 60-85” long
23 skeins abt 250g each …..


r/LoomKnitting • • 8h ago

Finished Object Arachnid Hat

24 Upvotes

This is a needle knit pattern from Tanis Gray but since it is knit in the round it is easily done on a round knitting loom. It required 120 sts. so I used the KB Flexee Loom Bitty links. You are able to decrease the crown like a needle knitter does and end up with a beautiful crown.


r/LoomKnitting • • 10h ago

Finished Object I finished the scarf finally after putting it off

Post image
19 Upvotes

I actually love how it turned out. I kinda messed up at the end when I was finishing it , becaus I was using a crochet hook to tie it off and I apparently don’t have the right one for my thick yarn, but I do like it. I can’t wait to wear it tomorrow to work. It’s been so cold and lots of snow ❄️ I put it on and the yarn is so soft and warm , I loveee it!! 😊💕


r/LoomKnitting • • 20h ago

Finished Object I finally finished this piece

Post image
13 Upvotes

I added some fringe it looked weird without it


r/LoomKnitting • • 21h ago

Finished Object A Wittle late but 🎃👻

Thumbnail
gallery
77 Upvotes

r/LoomKnitting • • 1d ago

Finished Object I finished a pair of actual socks!

Post image
86 Upvotes

I made a pair of slipper socks before, but this is my first pair of socks that one would theoretically wear with shoes. Something is wrong with how I did the Kitchener to join the toe, so there's a classic ridge there, and only wearing them will tell if it's a problem. (I use a flexible loom, and I did it on the loom, so I had to kind of translate the method, and maybe I didn't do it right.)

The yarn is Cascade Heritage Silk Paints (85% Superwash Merino Wool / 15% Mulberry Silk).

Having them done means I can move on to a Christmas present I still need to do. Assuming my cat lets me up to wind the yarn and get the right loom, that is. :D


r/LoomKnitting • • 1d ago

Why does it seem too loose

1 Upvotes

I wove a sample on my peg loom 3/4 spacing and it seems so loose. Then I watched a DIY YouTube video and her rug look loose also, what am I missing here? I am used to crocheting is that part of the problem?


r/LoomKnitting • • 1d ago

Work in Progress Loom knit doggy blanket

Post image
17 Upvotes

I’m somewhat new to loom knit. It’s definitely been an on again and off again hobby since I was a teen -I’m 24 now- but my therapist has asked me to make her dog a blanket so here a photo of what it looks like now. Will post pics when it’s finished if anyone wants to see them


r/LoomKnitting • • 1d ago

Socks Finishing the toe to Kitchener close - which peg should I be on?

2 Upvotes

Hi there, I’m at the end of my first sock(yay!) which I’ve enjoyed the process of! Although I didn’t do my swatch properly so it’s far too wide but still, I’m using it for practise! I’m grateful for all the learnings from this one. I’ve been using king Cole 4ply cotton / bamboo blend yarn, which is nice and soft but have to say I’m looking forward to using wool next as I think it’ll be a little easier to work with.

My question relates to the point of finishing the toe and starting the Kitchener close on the DPN’s.

For info I’m using the KB original sock loom and my peg 1 is at the bottom right and I’ve been knitting anti clockwise from right to left. I’ve worked the toe using pegs 1-30.

Both the KB video https://knittingboard.com/kitchener-stitch/ and FAQ https://blog.knittingboard.com/archives/5192 indicate from the pictures and video that the working yarn isn’t on the right hand side (so my peg 1) when they finish the toe. However, the working yarn then appears on the right hand side once the stitches are on the DPN’s.

They also say to keep the first half of the stitches 1-30 on the DPN nearest to you and 31-60 on the DPN further away from you.

Therefore, I just can’t work out how the working yarn can finish on the left hand side of the loom but then appear on the right hand side of the DPN’s.

Can someone help me understand this and what peg I should have the working yarn on once I’ve finished the toe?

I will be eternally grateful for the answer! :-)


r/LoomKnitting • • 1d ago

Equipment Question Should this be loose?

Post image
6 Upvotes

Just picked up this original (metal pegs) KB sock loom at Habitat ReStore for $2. Excited to give it a try, but the non-sliding short bar wiggles a little bit. I assume it should be tightened with the allen screw but thought I'd better check with the experts first!


r/LoomKnitting • • 2d ago

Can I knit a sweater on my 50 peg loom that is made for making hats?

7 Upvotes

I'm almost finished with the hat I'm working on but I was wondering if I can knit a sweater on it since my arm fits perfectly in the loom with my hat project on it


r/LoomKnitting • • 2d ago

Tips Am I doing something wrong?

Post image
7 Upvotes

I recently learned to needle knit and I have always been a little frustrated with how my loom ribbing looks, so I just made a swatch of 1x1 rib with 5 different needle sizes (4mm-6mm) and then loom knit (3/8" gauge flexee loom) at the top, and the loom knit ribbing just has very little pull-in compared to the needle knit. I tried tight tension and very loose tension and nothing came even close. Is this just how my ribbing will look on all of my loom knit projects? I'm working on a loom knit sweater right now, do you think it would be worth it to switch to needles to do the cuffs? I love loom knitting, it's how I got into fiber arts, but this is frustrating me a lot.


r/LoomKnitting • • 3d ago

Discussion I forgot how calm loom knitting can be

25 Upvotes

I learned how to loom knit back in 2013. Heard about the addi/sentro was fascinated. Got one recently and I love it. However I used to be able to do fancy stitches and ribbing. So here I am with my 18 inch kb loom relearning double knit and I’ll roonsklt try ribbing or seed stich next. I’m excited about combing the sentro plain knit with fun ribbing for cuffs and what not. I feel like loom knitting has come a ways since I last investigated it.


r/LoomKnitting • • 3d ago

Work in Progress Doctor who scarf! Update

Post image
62 Upvotes

Ok so iv been working on this now for two full weeks and this is the photo i took yesterday. Im just over 1/4 in….. and its 56 inches long……. Its gunna be a long boi!

Will update again next week!


r/LoomKnitting • • 3d ago

Equipment Question anyone got the instructions for the kb sock loom 2?

1 Upvotes

i kinda need them b/c i lost my copy & i gotta finish up a sock


r/LoomKnitting • • 4d ago

FLUFFY Made my first ever pair of mittens

Post image
22 Upvotes

r/LoomKnitting • • 5d ago

Blanket Question for experienced Loomers only please

13 Upvotes

I'm a fairly experienced Loomer , I have been looming for about 10 years. My favorite thing to make is blankets/ afghans . I usually follow Laurie Schues bind off tutorial on YouTube. But I was just wondering about something.. if you can crochet a straight line , could you bind off your blanket in this way ? The little bit of crochet I know how to do is basically a straight line lol , like when you bind off on pot holders . So any thoughts or suggestions? It takes me forever and 2 days to loom knit a blanket due to hand defects and severe arthritis, plates and screws from a bad accident, etc . , so I would really really hate to mess one up at bind off ! Thanks in advance for your ideas / help .


r/LoomKnitting • • 5d ago

Pattern Question Stockinette Blanket Border Question

2 Upvotes

I’m starting a blanket on my loom. Since it’s a big project, I’m planning to keep it simple. Stockinette stitch with a ribbed border on all 4 sides to hopefully help prevent curling.

My question is this, I want the ribbed border to look uniform from all sides, so would I do something like this:(obviously on a larger scale)

KPKPKPKPKPKPKPKPKP
KPKPKPKPKPKPKPKPKP
KK KK
PP PP
KK KK
KPKPKPKPKPKPKPKPKP
KPKPKPKPKPKPKPKPKP

Or this:

KPKPKPKPKPKPKPKPKP
KPKPKPKPKPKPKPKPKP
KP KP
KP KP
KP KP
KPKPKPKPKPKPKPKPKP
KPKPKPKPKPKPKPKPKP

Or does it not matter?

Edited to correct some terms I got mixed up.


r/LoomKnitting • • 5d ago

Equipment Question Just proud *shrug

Post image
46 Upvotes

r/LoomKnitting • • 5d ago

Tips I am the worst at picking yarn

10 Upvotes

I have never followed a pattern. I only use the knit e-wrap stitch and go until the length feels right and finish it off. They are usually too long.

My cousin’s son is having a baby boy end of April. They are in Boston and Patriots fans. I would love to make a larger hat, not newborn, in Pats colors. He would be 6 months by then.

Normally I pick any yarn and color. What kind of yarn? Hypoallergenic? I know nothing about skein or yarn size. I will look for a free pattern for babies. I like Loom A Hat for tutorials. But I want to make a nice one more than just knit stitches in the proper length and not just knit until it looks right. Thanks in advance.


r/LoomKnitting • • 5d ago

Tips Sock Anxiety

10 Upvotes

Something I have long wanted to do is make socks ✨ but every time I try to start I get caught up in the overwhelming math of it all.

I have been loom knitting for several years on and off… so far I have hats, scarves and blankets on my achievement list and even my most recently finished project was a custom designed wrap jacket for my friends dog.

I want to make a practice set of socks for my girlfriend. My loom for this is the KB Sock Loom 2, using #4 Aran- Heavy Worsted Yarn.

After reading so many patterns and tutorials online I honestly just don’t know where to even start so some help would be immensely appreciated 🥹


r/LoomKnitting • • 6d ago

Finished Object Finished my first scrap yarn hat.

Thumbnail
gallery
100 Upvotes

r/LoomKnitting • • 6d ago

Loom knitting socks

4 Upvotes

I have a small 24 peg loom. Would this be suitable for knitting socks? Would I need a smaller gauge? Will the stitches be too big. I intend to use cotton and work up to merino wool. Not chunky yarn.