r/MarineEngineering • u/TheDeepDraft • 7h ago
r/MarineEngineering • u/charzr • 22h ago
ETO DEIF ie250 controller
Anyone worked with DEIF ie250 Marine controller?
I can see in the datasheet,
- Deif network Ethernet in bluelines in blue
- Deif network CAN bus in Green
Can both the 1) and 2) be used for load sharing of generators?
r/MarineEngineering • u/Unusual-Ad-4812 • 1d ago
Advice for brother-in-law, and Jones act ships
In the USA. I have a family member in an engineering job in the Navy. He also wants to get out soon. We talked about the possibility of him doing a civilian engineering job for a commercial ship under the Jones Act. Does anybody have any advice that I could give him? What is the lifestyle like? What training would he need to land a good position? Would his experience on navy ships translate well to a commercial ship?
r/MarineEngineering • u/Elegant-Farmer-3176 • 1d ago
Need some help
Hi everyone, Someone close to me works as a marine engineer on a vessel associated with Maersk. On November 14, he told me their vessel was being transported by a heavy-lift ship towards Málaga, Spain, possibly due to engine problems.
He mentioned they were already close to Spain and that the journey would take around two days. However, I haven't heard from him since. He's usually offline for around 48 hours because of connectivity issues, but it's now been longer than that. I unfortunately don't know the name or IMO number of either vessel.
I don't know who i should reach out to, especially that he was coming back home
r/MarineEngineering • u/Independent-Vast6146 • 1d ago
The Ocean’s Tear: Exposing the Cruelty Behind Commercial Pearls and Marine Harvesting
reddit.comr/MarineEngineering • u/seafarers_ENG • 2d ago
2/E I'm a 2nd engineer and built a free offline iPhone app for bunkering records & VCF calculations — looking for feedback
Hi all,
I'm a 2nd engineer on merchant ships. During bunkering I kept doing the same thing over and over: take the temperature and density, look up the VCF, work out the volume at 15°C and the weight in MT, and track how much is in and how long is left — by hand or on a calculator, usually in the engine room with no signal.
So I built a small iPhone app for it, mainly for my own use. It's now on the App Store, free, and I'd like to hear from people who actually do bunkering.
What it does:
- Enter temperature (°C or °F — the other converts as you type), density and volume → VCF, volume at 15°C, MT in Air and MT in Vac
- VCF follows the ASTM D1250 Table 54B method (generalized products, 15°C)
- Time-stamped log of every reading, with cumulative quantity, progress, bunkering rate and estimated finishing time
- Separate tracking for parallel loading into different tanks
- Export a session to Excel (.xlsx)
- Works completely offline. No account, no ads, no data collection
- English / Japanese
What it does NOT do:
- No tank tables, sounding conversion, or trim/heel correction (tank tables are ship-specific and usually confidential, so I left them out)
- It's a reference/record-keeping aid, not a replacement for the BDN or your own checks
iPhone only for now (iOS 26.5 or later).
App Store: https://apps.apple.com/app/vcf-gauge/id6813090246
I'd really appreciate any feedback, especially:
- Does the calculation match what you get on board?
- What would make it actually useful during your bunkering?
- How do you handle these calculations now — spreadsheet, company form, calculator?
Thanks, and safe watches.
r/MarineEngineering • u/BeingBudget3077 • 2d ago
Synergy Chennai synergy interview 16 17 nov
reddit.comr/MarineEngineering • u/AmbitiousTicket8112 • 2d ago
3/E Finding a new company to work is cancerous
So you want to apply on a job you found by scouring the web? Now bend backwards and fill an application that will take 2 hours which you will never hear about it again.. seriously how do you guys in EU find a job? I currently try to transition my career from bulk carriers to ro ro and other types of ships but im getting tired. I know being 2nd Engineer practically allows you to work everywhere but i want to transition earlier.
Seriously eu companies can learn from US and Canadians, their job applications are straightforward but they are hardly employ people from the old world.
r/MarineEngineering • u/Scared_Cobbler_6374 • 2d ago
Anyone accepted into NSCC Marine Engineering Technology for September 2027?
Hey everyone!
I've been accepted into the Marine Engineering Technology program at NSCC for September 2027!
Just wondering if anyone else has been accepted for the same intake. Would love to connect with future classmates, share information, and maybe start a group chat before classes begin.
Feel free to comment or DM me!
r/MarineEngineering • u/fitfatfi • 3d ago
Transport Canada Engine Room Rating
reddit.comHi! Has anyone written the engine room rating exam with Transport Canada recently? My husband just received his direct assessment result and was instructed to write the engine room rating exam.
Would you mind sharing a reviewer and what to focus on? We will also email our local transport Canada office tomorrow to get some ideas. Thank you!
r/MarineEngineering • u/Worried_Actuator2415 • 3d ago
Field Service Engineer comparison: Everllence (MAN ES) vs. WinGD vs. Wärtsilä (Pay, Work Culture, Benefits) + Other Major OEMs?
Hi everyone,
I’m a Marine Engine Field Service Engineer looking to explore my next career move, and I’d love to get some real-world insights from people working at—or closely with—the big three: Everllence (formerly MAN Energy Solutions), WinGD, and Wärtsilä.
Could anyone share a realistic comparison of what it’s like working as an FSE at these companies? Specifically:
Compensation: Base salary, overtime rates, and offshore/field allowances.
Work Environment & Culture: Travel frequency, roster/schedule predictability, and management support.
Benefits: Health insurance, pension/retirement plans, and overall work-life balance.
Also, beyond these three, are there any other major marine engine OEMs (e.g., Caterpillar/MaK, Rolls-Royce/mtu, HD Hyundai, Mitsubishi, etc.) that you’d recommend looking into for an FSE role?
For context, I have a strong track record in the field and am widely recognized by peers and clients for my technical troubleshooting skills and work ethic—so I'm aiming for a company that truly values and rewards top performers.
Any firsthand experiences or advice would be greatly appreciated. Thanks in
advance!
r/MarineEngineering • u/EileensDad • 4d ago
UK Cadetship choice advice
Update: Clyde emailed me back stating that the 3 companies I want (Calmac, Subsea7 or Tide water) are sponsoring cadets for the January intake, though it is not guaranteed they would put my name forward if they are my preference. What are the chances do you think? Does anyone ever really get their preference with Clyde? Or are JustBe and SSTG still the safer options for training provider?
I already have an offer for Clyde marine to do an HND route cadetship in January, unfortunately I don’t know what companies are on offer (I’ve emailed them so hopefully they get back to me soon as the deadline is in 5 days). I’ve also now got an interview with JustBeMaritime on the 19th November but they’ve already told me they only have Zodiac or Borchard lines to offer for sponsorship. Hopefully I’ll also have an SSTG interview soon but I’m worried about letting the Clyde offer run out, and then not getting either JustBe or SSTG.
On the other hand I’m worried about accepting Clyde as I’ve heard many stories (as everyone has) of cadets struggling to even get their sea time.
Any advice on my situation? Accept Clyde and just get on with it, ‘a cadetship is a cadetship’ etc? Or If I get offered JustBemaritime should I just go for them and swallow the Zodiac pill? I’ve heard they’re much more communicative throughout the cadetship.
r/MarineEngineering • u/AskMrRango • 4d ago
seeking job site suggestion
Hey everyone,
I’m a Trainee Fitter-Cum-Welder from Bangladesh. Finished my pre-sea training here, but honestly, it feels like by the time I finally land a job, all my documents will expire 😅
I’m also willing to join any foreign shipping company as a Trainee Fitter-Cum-Welder or even at the lowest rank just to gain some real sea experience and learn the ropes properly.
So I’m looking for genuine websites or portals where seafarers can actually find real entry-level or trainee jobs (like Trainee Fitter, Engine Cadet, or Deck Cadet). It’s hard to know who to trust anymore.
If any of you have personally used a site and actually got hired through it, please share your experience or recommendation. It would mean a lot 🙏
Thanks in advance, and stay safe out there 🌊⚓
r/MarineEngineering • u/Unable_Competition21 • 5d ago
Maritime research
Hi everyone, my name is Maksym, I am currently completing a Master of Science in Maritime Operations at Munster Technological University and am seeking participants from the maritime sector to contribute to my thesis research. If you work as Marine Engineers, Deck Officers, Ship Surveyors, Superintendents, Maritime Students and Researchers or other Maritime Professionals, your expertise and insights would be greatly valued. This research explores role of emerging technologies in supporting decarbonisation for ageing maritime fleet.
✅ Takes only a few minutes to complete
✅ Responses are for academic research purposes
✅ Open to professionals across the maritime industry
✅ Your contribution will support research into maritime decarbonisation and fleet modernisation.
👉 Participate in the survey: Role of Emerging technologies in supporting decarbonisation for ageing maritime fleet.
https://docs.google.com/forms/d/e/1FAIpQLSeQI1be-Ku7jOk2hb-3N0Vdfgxo-IHekQmDrEe6xGQl5OMDJA/viewform?usp=header
Please consider sharing this survey with colleagues, industry peers, and professional networks within the maritime sector. Every response helps strengthen the research findings and contributes to a broader understanding of how emerging technologies can support the decarbonisation of ageing maritime fleets.
Thank you for your time, support, and willingness to contribute to this academic research.
Best Regards,
Maksym Gyriak
r/MarineEngineering • u/Historical_Diet_7501 • 6d ago
I'm aspiring to be a marine engineering student, any tips? (I want to pursue this cuz I like the concept of travelling, and they also said that it pays well. loll)
r/MarineEngineering • u/charzr • 6d ago
Engineering/Management decision at the yard
Electrical Equipment (VFD): The dV/dt filter inside the VFD cabinet was supplied by the VFD manufacturer's subvendor. We have now identified that the filter has no nameplate and no routine test report. Since the VFD panel is urgently required to maintain the project schedule, we need to determine whether the filter can be accepted under the VFD manufacturer's overall package responsibility, or whether the required routine tests should be completed at the yard
Construction/Commissioning do not prefer performing these filter specific routine tests at the yard.
What do you do in this situation?
r/MarineEngineering • u/Cadet2Engineer • 7d ago
With the New Orleans collision in the news, here are some photos I took aboard a ship after a collision and fire
With the recent collision in New Orleans making the news, I thought I’d share some photographs from a different incident.
A few years ago, I had the opportunity to go aboard a vessel that had suffered a collision followed by a serious fire.
These are photographs I took while onboard. The extent of the damage was incredible, particularly inside the ship where entire spaces had been badly affected by the fire.
It’s one thing reading an accident report, but seeing the aftermath firsthand really puts things into perspective.
Has anyone else been aboard a vessel after a serious collision or fire? Interested to hear your experiences.
r/MarineEngineering • u/klick_6 • 6d ago
Transitioning from Aircraft to Yacht engineering
reddit.comAny advice for my post above^ is appreciated. I know this sub is orientated to commercial vessels on an industrial scale. But you are filled with tons of knowledge of marine engineering pathways as a whole.
Cheers guys.
r/MarineEngineering • u/cronicasdebalsa • 7d ago
¿Que les parece este prototipo de balsa con basura?
r/MarineEngineering • u/Worldly_Extension898 • 8d ago
Marine engineering program in Canada-BCIT vs MUN vs CCG vs Georgian
I am applying to these programs for the upcoming intake. Could you share your experience with any of these programs?
I heard the job prospects for BCIT may not be as good as MUN, and CCG will guarantee you a job afterwards. Is this true?
Does CCG give 1st class exemptions upon graduation?
What are the job prospects for any of these programs? Is MUN the best? Or they are all the same?
Is social life boring at Georgian or MUN because they are located at remote areas?
Since I already have a degree in engineering, which one will accept course credit transfer/PLAR?
Would love to hear your opinion or experience, thanks!
r/MarineEngineering • u/sreenandpc07 • 8d ago
Foreign language in marine engineering
Since I am doing marine engineering, we were told to select and study one of these foreign languages:
French
Chinese
Japanese
German
Which one would you recommend?
r/MarineEngineering • u/Offshore-Tigr • 9d ago
Copaslip on Wartsila 32 injector nozzles
Hoping some of you guys can help me with this. Basically, one of our mechanics is insisting to dip the outaide of our Wartaila 32 injector nozzle tips in copaslip before mounting.. According to him, the copaslip will burn/melt/whatever and create a sealing layer ("just like on the exhaust gas flanges")and it will prevent blowby's.
I'm being quite adamant in my opinion that this is stupid, and possibly the reason we're getting these blowby's in the first place.
They're sealing surfaces. They seal. If they don't seal, we replace the injector sleeve or the nozzle nut. It's not like smaller engines with a copper washer..
But it's my opinion against his 40 years of experience, so I'm doubting myself a bit now.. But I just find it really hard to believe that coating a metal sealing surface in copaslip will do it any good.
Anyone got opinions on this?
r/MarineEngineering • u/ArchaicClownn • 9d ago
Questions about marine engineering
Hi.
Im currently a 18yr old AL student. Who has an interest in becoming a marine engineer. And wanted to ask a few questions from actual marine engineers.
- I know its course dependent but how hard was it to become a marine engineer ( Academically and Physically). (How good do you have to be at maths)
- What made you choose this career
- how long are your work hours/days
- what are the responsibility and daily duties
r/MarineEngineering • u/Realistic-Bank4083 • 9d ago
Marine Engineering Tech at Georgian
Hello,
I've been accepted into the Marine engineering program at Georgian. I currently live about 3 hours away so the distance isn't too bad for me and I drive. My only fear is that I won't be able to afford it. How are the job prospects in Owen Sound? Where I am currently living, jobs are unemployment is quite an issue and I have had to drive 45 min away to a rural community just to have consistent employment.
Otherwise, I'm really excited for the program.
The website says 3 years, but the program has more than 6 semesters, can someone explain?
r/MarineEngineering • u/Sebbaticallll • 10d ago
Wartsila VPP replacement done and dusted