r/Multicopter • u/Lopsided-Cicada1329 • 15h ago
r/Multicopter • u/AutoModerator • 1d ago
Discussion The Weekly r/multicopter Discussion Thread
Welcome to the weekly r/multicopter discussion thread. Feel free to ask your questions that are too trivial for their own thread, make a suggestion on what you'd like to see here, or just say hi and talk about what you've been doing in the world of multicopters recently.
Don't forget to read the wiki, where you'll find details of suppliers, guides and other useful links.
If you want to chat, then the Discord server is located here (an invite link is here if you haven't already joined)
Old question threads can be found by searching this link.
r/Multicopter • u/QuadyMcQuadFace • 21h ago
Video Found a nice RC park to fly my drones/planes in Wichita Falls TX
r/Multicopter • u/Firm-Luck2062 • 23h ago
Build Log Ho creato una sala di controllo per sciami di droni: spettacoli di luci, missioni di ricerca, volo manuale e 16 visuali da telecamera in un'unica finestra. Demo nel tuo browser
r/Multicopter • u/lazzmo • 1d ago
Build Log Is this hot enough for soldering battery leads?
r/Multicopter • u/pokemonguy0417 • 1d ago
Question Any recommendations for drone shops in Hong Kong?
Hey everyone!
I'm from the Philippines, and I'll be visiting Hong Kong soon. I'm planning to check out some drone shops while I'm there since drones and FPV equipment can be pretty expensive back home.
I'm mainly interested in DJI drones like the Mini and Mavic series, but I'm also interested in FPV drones, ready-to-fly (RTF) kits, parts, accessories, and other multicopter equipment.
Does anyone know any good drone shops in Hong Kong that are worth visiting?
I'm particularly looking for:
- Shops that sell DJI drones at reasonable prices.
- FPV hobby shops that sell RTF drones, parts, and accessories.
- Stores with a good selection of both new and secondhand drones.
- Reliable shops with good customer service and legitimate products.
I'd also appreciate recommendations for specific shopping areas or electronics malls where I could find these stores.
If you've bought drones or FPV equipment in Hong Kong before, how was your experience? Are the prices actually cheaper compared to other countries?
Thanks in advance for any recommendations!
r/Multicopter • u/Ok-Department7786 • 1d ago
Review Put together a 5 inch volador and itโs my personal best I think. Still needs to fly but components tested. What you guys think?
galleryr/Multicopter • u/jamesrelish • 1d ago
Custom I designed an open source long range FPV frame (all files on GitHub)
galleryr/Multicopter • u/AtaBombastic • 2d ago
Question BEST 5-INCH ON THE MARKET, WHICH ONE?
reddit.comr/Multicopter • u/foremi • 2d ago
Discussion This showed up yesterday
I've been looking for a similarly "simple" radio to my Tango 2 all year and I must have just gotten super lucky to see it in stock and grabbed it when I saw the TX specs.
I've only flown indoors so far due to weather, but overall first impressions are I like it. It's slightly wider than the tango 2, but with my claw grip with pointer finger either above the gimbals, or above the front switches on the top edge is quite comfortable for me.
Context - I have huge hands and have struggled to get used to small gimbal radios like the HDzero and AX12 I have. I've been looking for a LR1121 based radio that's similarly "simple" to my Tango 2 because I don't use many lua scripts and just need a radio that's a radio.
Radios I have on hand - Taranis X9d, Tango 2, HDzero, Ax12, and have held most of the radiomaster bodies quite a bit. I also have no affiliation with BetaFPV and just got lucky being able to grab this when I did.
r/Multicopter • u/bonoboxITA • 3d ago
Question DJI O4 Airunit firmware ?? any updates?
it has been several months since the last update.
A lot of rumors were hinting to a firmware in November which should fix the gyro issue but so far nothing.
Any news/updates?
r/Multicopter • u/Own_Plate_7033 • 3d ago
Announcement Open-source ArduPilot log analyser + tuner: finds vibration problems, then designs and sim-tests a new tune
Quick share for ArduPilot folks here. I built a MATLAB toolkit after a crash I could only explain once I looked properly at the logs.
- ๐ Log health report: vibration, clipping, EKF, power
- ๐ง Learns your quad's rate dynamics from the log
- ๐ฏ Suggests PID gains with stability margins
- ๐งช Test-flies old vs new tune on ArduCopter SITL (with turbulence) before you touch the real thing
- ๐ Outputs a `.param` file
The plot compares three tunes in sim: step response, motor noise and position hold.
https://github.com/Prateek-elec/ardupilot-flight-test-lab (free, MIT, needs MATLAB)
Would love to hear if it matches what you see on your own builds.
r/Multicopter • u/BeachbumfromBrick • 3d ago
Question Followers on tik tok ?
reddit.comAm I doing this right on tik tok? Keep going to 1,000 followers to go live on GAMING to show my screen recording LIVE? It shows it as a โDRAFTโ when Iโm done trial and error .. but not sure if i REALLY went live ..? It showed NO one seen or passed by so I assume it IS 1,000 followers.?
r/Multicopter • u/hackerzlabpixhawk • 4d ago
Question Tarot 650 frame drone build for maximum flight time?
What do you think of my proposed drone? Basically, I'm looking for maximum flight time and efficiency.
- Tarot 650 TL65B01 framex 1 = 476g
- Pixhawk 6C + PM02 x 1 = 80g
- PDB, SwiftWing 3-6S XT60 = 25g
- T-Motor MN3508 KV380 x 4 = 350 g
- T-Motor Air 40A ESCx 4 = 104g
- T-Motor MF1503 (or Tarot TL100D04) x 4 = 96g
- Holybro M10 GPS x 1 = 35g
- Skydroid C14 Pro Gimbal x 1 = 210g
- Skydroid GR01 x 1 = 50g
- GenX Pro+ 6S solid state battery of 16,000mAh x 1 = 1490g
- Misc. (XT60/XT30, silicone wires, battery straps, microSD, M2/M3/M4 screws)= 120g (approx)
=================
Total AUW = 2,830g (approximately)
I'm hoping this drone build gives me a minimum 30minutes flight time.
If you are to build this drone, which parts would you recommend for better efficiently and increased flight time? I'm open to all kinds of suggestions starting from the frame.
PS: I understand that changing the original frame length to accommodate 17 inch props will increase flight time but I don't want to make such customization.
r/Multicopter • u/Boat-Pleasant • 5d ago
Commercial Drone builders switching to US motors after the FCC rule: what are you using?
Asking from the robotics side. Westmag in South SF is ramping US motor production, and a few others are popping up. Has anyone actually received US-made motors yet, and how do they compare on price and performance?
I'm with Tolerance Labs (we source motors and actuators for robotics teams at tolerancelabs.ai), so I'm trying to learn what drone folks figured out first.
r/Multicopter • u/Hes-behind-you • 6d ago
Question DSHOT telemetry message on DJI goggles
reddit.comReposted here in the hope someone might be able to advise on a fix.
r/Multicopter • u/pokemonguy0417 • 7d ago
Question Would you recommend buying a DJI Mini 3 or DJI Mavic 4 Pro in Hong Kong instead of the Philippines?
reddit.comr/Multicopter • u/pokemonguy0417 • 7d ago
Question Would you recommend buying a DJI Mini 3 or DJI Mavic 4 Pro in Hong Kong instead of the Philippines?
Hi everyone!
I'm from the Philippines, and I'm planning to buy either a DJI Mini 3 or a DJI Mavic 4 Pro. However, drone prices here in the Philippines are quite expensive, so I'm considering buying one in Hong Kong, where I've noticed that prices seem to be cheaper.
I'm planning to visit Hong Kong soon, and I thought it might be a good opportunity to purchase a drone while I'm there.
I have a few questions:
- Would you recommend buying a DJI drone in Hong Kong instead of the Philippines?
- Are DJI drones generally cheaper in Hong Kong, and are the savings worth it?
- Are there any reputable DJI stores or authorized retailers in Hong Kong that you would recommend?
- Would I encounter any issues with warranty coverage, repairs, or DJI Care Refresh when bringing the drone back to the Philippines?
- Are there any customs regulations, taxes, or restrictions I should be aware of when bringing a drone back home?
- Would you recommend getting the DJI Mini 3 or spending more on the DJI Mavic 4 Pro?
I'd especially appreciate advice from Filipino drone pilots or anyone who has purchased DJI drones in Hong Kong.
Thanks in advance for your recommendations!
r/Multicopter • u/pokemonguy0417 • 7d ago