r/Plumbing • u/G-Craka • 6h ago
r/Plumbing • u/unknown1313 • Sep 08 '23
Read the rules before posting or commenting!
Due to a large influx of people not reading the rules and how small of a Mod team we are this is here to serve as the only reminder of the rules. Just to be clear asking or commenting about prices is a permanent ban, the internet is not the place to judge if prices are "fair".
Rules are available on the sidebar.
r/Plumbing • u/ParksVSII • Dec 22 '22
FROZEN PIPES MEGATHREAD
Please post any questions you have regarding frozen lines here. All other new posts will be removed from the main feed and directed here.
r/Plumbing • u/Crafty-Strategy-7959 • 45m ago
In terms of plumbing crimes, is this a felony? Previous owner vented a basement sewage pump through the first-floor siding...
r/Plumbing • u/milexmile • 1h ago
Roast my DIY kitchen sink plumbing/p-trap before I glue it.
Some days I think I know what I'm doing. Today, less so. Are there issues with my P-trap? Side discharge with cheater vent thru the roof about 3ft to the right of the cabinet shown (single story bungalow).
r/Plumbing • u/Jolly-Ad-9060 • 1h ago
Need urgent advice
How should i handle this rot beneath the toilet? I only meant to change the wax seal because the toilet was rocking and wouldnt tighten. Should i put the new seal in for now and show this photo to my landlord?
r/Plumbing • u/Diligent_Lime_2991 • 8h ago
Water Heater issues - can anyone recommend best course of action?
I’ve ChatGPT’d this but wanted to see if a professional had any recommendations or suggestions. Thanks in advance.
Update: I’ve called a plumber. Thanks everyone for their inputs. I really appreciate you.
r/Plumbing • u/squirrellydw • 9h ago
Left side is always slow to drain
What can I do to improve the drain on the left side? It always drains slow.
Thanks for any suggestions.
r/Plumbing • u/RunaboutJ • 5h ago
Full Repipe
I was talked into a repipe, they said the copper had eroded (built in 83, Florida) block house on slab. We just bought it and there are really obvious signs of previous water damage. They ran PEX-A through the attic. The whole situation started because I wanted to move the washer and dryer hookups to the garage from the kitchen (it's a super tiny kitchen and I need the space).
Anyway, I don't know what I'm looking at here and would like some outside perspective. We paid to go with the company with the best reviews online. I don't know what my expectations should have been; it passed inspection. But something in my gut is nagging at me. I know I'm not looking at art, but I didn't think it would be so dang ugly. And some of the wood they cut into makes me feel unsure; it's my understanding that it's load-bearing.
*We also went with the same company to do the electrical.
r/Plumbing • u/Askew_2016 • 4h ago
My sewer line wasn’t built with enough slope so it is clogging every 6 months. Anything I can do?
We try to use as little toilet paper as possible and don’t flush anything else but it keeps happening and it is expensive and disgusting
r/Plumbing • u/BichezNCake • 3h ago
Shut off valve or not?
Guys I am not an idiot but I don’t pretend to know what I don’t know or make assumptions with plumbing. Are these the shut off valves for a washing machine or something else? These have already been pulled forward from facing straight down, and it’s kinda difficult to pull any more forward. If I remove the hose from the washing machine will I be dealing with just residual hose water, or a gushing torrent because the valve isn’t completely closed? TIA
r/Plumbing • u/Fuzzy-Recover119 • 28m ago
Water Pressure Help
Any ideas what could be causing the low water pressure on my double vanity? Only place in my house that is struggling
r/Plumbing • u/Dizzy-Cow-1030 • 6h ago
What is wrong with my toilet? Landlord zero help
My landlord is nice, but doesn’t offer services. Every time I text that something is broken, the response is basically to fix it ourselves and she’ll cover the expense. Which at least she does that but I’m not a plumber, I haven’t the faintest clue why my toilet runs non stop unless I cut off the water flow. Please help me I’m so sick of turning the toilet off every time I use the downstairs bathroom or guests use it. I’ll learn to fix a toilet I just can’t figure out what’s wrong.
Problem: If I flush, it doesn’t stop running unless I let all the water drain out.
r/Plumbing • u/kamiorganic • 4h ago
Water surging
A few months ago I replaced my pressure switch because my water kept going out randomly and back on after turning the breaker off and back on so I figured it was the switch. Fast forward end of the month last month and I had to pull my well pump and replace the electrical cord because who installed it last didn’t use a submersible wire aswell as used a pretty banged up wire so the pump wasn’t getting a full current to it (hard to explain but seeing it was like how tf is it still working).
Well getting the pump back on and running pulled sediment up and I had to take apart some fixtures and clean them I even replaced two of them.
Well now my water has been surging where I have pretty good flow then poor flow pretty rapidly and my pressure switch has been clicking constantly whenever a faucet is open and my pressure gauge goes up to 50 then drops to 20ish and back and forth pretty rapidly (I got a 30/50 switch).
I’m fairly certain my pressure tank is good still, has the recommended 28psi of air charged and the nipple below the switch isn’t clogged but not being a professional im kind of loss at what to do from here to diagnose/fix the problem
Should I be able to adjust the pressure switch nuts to fix the problem? Do I need a new pressure switch? Is it a pressure tank problem? Please help, the old lady wants this fixed or my head 😅
r/Plumbing • u/Great-Ad-5660 • 45m ago
Can you explain the difference between the 3 circulatory pumps?
This tankless system was installed prior to me purchasing the home. Haven't had any issues however I've always wondered what the difference was between the 3 circulatory pumps? 2 of them have valves open and the other (far left) has always been shut off. This system services the house but also in-floor heat in the connected shop. Thanks in advance.

r/Plumbing • u/lombardpratt • 1h ago
How do I get this sucker out?
Older kohler two handle sink. The escutcheon is fused on pretty good, likely will need to be cut off, if I need it off. Tried all sorts of sockets, nothing lining up with the two flat sides of the retainer nut.
If I do somehow get it out, any source for these old carts? Hoping just a washer I can replace to stop drip.
r/Plumbing • u/pinochetwasright_ • 1h ago
Kitchen sink issue
Hoping this is the right spot to post:
I am trying to see if there is a way to just replace this hose part or if I need a whole new faucet set up.
Thanks.
r/Plumbing • u/boilerdam • 7h ago
Automatic shut off valve keeps turning water off - New Homeowner
We just moved into a new-to-us home last Saturday. Our insurance made us install an automatic water shutoff valve. The seller completed some renovation mods prior to selling and installed a new water conditioner and two new tankless Navien water heaters with independent external recirc loops.
I connected the shutoff valve to WiFi and the app about 4 days ago. Since then, the valve has shut off water about 10 times due to high pressure. Looking at water pressure history, nominal pressure for most of the day seems to be ~60psi +/- 2. Early mornings and late evenings, pressure shot up to ~100psi (yesterday morning). Opening a cold faucet anywhere in the house helps relieve pressure and I can turn the water back on.
I have not been able to figure out a pattern of high pressure that is triggering the valve to shut off. By searching this sub and Gemini troubleshooting, I have done these:
- changed water heater to "intelligent" from a scheduled heating. Previous, I had set heating to 6-7am and 6-8pm everyday. I wanted to eliminate the heater as a cause - read that tankless water heaters don't always come with an expansion tank but we have a recirc loop, so may be it does. Navien NPE-210A2
- switched the water conditioner to bypass mode. I noticed that at 2am yesterday, there was a 76gal water usage, most likely the conditioner flushing exactly 1wk after it was installed and activated morning of when we moved in. Tried this option to eliminate the water conditioner as a cause for high pressure.
Is there any other troubleshooting I can do? The fix for now seems "easy" - if the water gets shut off due to high pressure, I open a cold faucet, relieve pressure and turn the water back on. But I fear this is certainly not a long term solution and it's causing unnecessary stress on all the plumbing.
r/Plumbing • u/No_Raccoon6052 • 5h ago
How do can I get into plumbing with no background
I want to know how can I get into this trade being green with no background, I can’t afford trade school and I’m interested in learning.
r/Plumbing • u/Sweet-Ad-6245 • 7h ago
Heat tape in well
I’m going into my second winter with my camp in Maine. Last year I didn’t realize the well had an inline heater/heat tape, so never used it. We had an unseasonably cold winter and never had an issue with anything freezing or breaking. This year I’m debating how I should use it. If we aren’t there for weeks at a time, does it make sense to leave it plugged in and on, or would turning it on for an hour before we turn the well on suffice? I don’t want to damage anything, but also don’t want to waste more electricity than needed. Thanks!!
r/Plumbing • u/javensisvir • 2h ago
New style Kohler thermostatic cartridge
I’ve replaced a leaking Kohler thermostatic valve with K-1046104 which has a larger yellow stem than the original. The parts I have do not fit over the larger stem. The written instructions and diagram with the new valve are for the old-style valve. I suppose I need the 1046105 spline adapter kit but then I must also need a new collar and possibly other parts (spring?) which I can’t identify. Please tell what I need and how to complete the installation and adjust the temperature. Thank you.
r/Plumbing • u/Wolflmg • 2h ago
Vintage sink leaking.
Any one know where we can get the replace part for the drain and valve? https://imgur.com/a/YXOekhk
r/Plumbing • u/SmellSilly1537 • 2h ago
Clogged drain
Hello, I could use some help please. Long story short my water was shut off for 3 months. Used pool water to flush the toilets. Water has been back on for 1 month. Now the toilet is backing up into the tub. This house has 2 bathrooms on the same side of the house. Both are out of commission now.
I've tried snaking through the tub, toilet and sinks with no success. I've pulled out a little stuff here and there but still no luck. There's a cleanout in the front yard, but the access pipe curves toward the street and it provided no relief. I also went on the roof through the vent pipe and barely anything came out.
I'm currently using a 24v 35ft. Kobalt electric auger.
Any suggestions? I was planning on renting the 1/2in. machine from HD hoping that might work.