r/Pottery • • 3h ago

Help! Subscription recs?

0 Upvotes

I've been member of ceramics arts network in the past and now there are so many memberships out there. I'm currently looking between ceramics arts network again, matherhouse and ceramics materials workshop memberships. Anyone have any they love, hate, etc? I have been in the intermediate level for decades. I'm an art teacher and clay is my medium and looking for taking the next leap to professional now that I'm in my last decade of teaching and my kids are older and I have time to dedicate to do this. My goal is to produce fine art ceramics and transition to exhibitions/galleries/fine art fairs.


r/Pottery • • 17h ago

Question! How to glaze like this?

Post image
1 Upvotes

Chawan by fkapottery on IG

Does anyone know how to glaze like this? I’m assuming you just paint a buncha different strokes of different colors but unsure. Which glaze colors do you think these are?


r/Pottery • • 21h ago

Other Types Made these two today, less water. 2.6 lbs each weigh about 1-2 lbs after throwing

Thumbnail
gallery
0 Upvotes

Larger walls measure just under 1 cm thick smaller just under half a cm thick


r/Pottery • • 5h ago

Question! Basic home setup for handbuilding

3 Upvotes

I am a newbie and am taking classes at a studio.

I’m hoping to practice handbuilding at home (and focusing on throwing, trimming and glazing at the studio).

I looked up the FAQs here for home setup, but in addition to what I learned there I am curious if people have further tips.

Here’s my checklist of what to get:

- Floor protection cover for my hardwood floor (any suggestions?)
- A table to work on (thinking of a cheap plastic one?)
- 3 Buckets for washing and decanting (including washing my hands)
- Ruler, wooden sticks, roller
- plastic to cover pieces (or is a plastic box better?)
- spritz bottle
- basic pottery tool kit
- sponges
- moulds
- and I will use my studio’s clay so I can fire there

Am I forgetting anything? Will this be OK in terms of dust and silica particles in the air?


r/Pottery • • 3h ago

Question! Do some clay bodies give off more fumes?

1 Upvotes

I have run my kiln about 20 times. I had been running it in a finished room in my basement with the Envirovent running and three windows open. I slowly reduced to one window open as it got colder and I hadn’t noticed fumes. I started a cone 04 fire yesterday around 2:40 pm with the eurovent running and one window open. I have done small tests with standard clay 225, 240 and 553. Yesterday I put in a 3 lb vase of each 225 and 240. I woke at 4 am to find the whole house was filled with noxious fumes. I’m concerned because it seemed like such a dramatic change. i shut off the kiln which had 45 minutes left in the program and opened windows throughout all floors and returned to my bedroom with my dog to let the house air out. I’m wondering if the extra basement windows being open were in fact really important or if the clay body had something to do with it? Whenever I stand outside the vent, I marvel at the fact that I don’t notice much as far as fumes but the smell coming out of the vent outside today was strong.


r/Pottery • • 15h ago

Teapots Glaze firing pots with lids

3 Upvotes

I’m taking a ceramics class and I notice a number of people are glaze firing vessels with lids in place rather than separating them. A good number end with the lid stuck. Is it not better to set them up individually in the kiln?


r/Pottery • • 21h ago

Mugs & Cups 顾客定制的粉彩

14 Upvotes

r/Pottery • • 20h ago

Question! What happened here?

Post image
6 Upvotes

I made about 20 of these ornaments. Luckily only fired a handful. At cone 5 and a medium slow cool.

I applied underglaze and wiped back on the bisqued work. On the left I applied two coats of rainforest. The right has two coats of snow. The other one has obsidian and it’s totally blacked out (ha woops.)

I’d be happy with rainforest but it didn’t fill in those teeny tiny dots in the texture.

My second question is about the other bisqued and glazed pieces. I plan to wipe off all the glaze and just apply clear. Wondering how that’ll turn out…


r/Pottery • • 1h ago

Mugs & Cups Cocktail glasses

Thumbnail
gallery
7 Upvotes

I figured out my 4 sided mugs have a pretty nice hand feel without the handles and are just the right size for cocktails. Added some lines for texture and the glazing came out quite nice.


r/Pottery • • 15h ago

Question! Thoughts on people asking to buy imperfect work for cheaper?

12 Upvotes

I have had several people ask to buy mugs I've made that have flaws like a chipped foot or a shallow crack where the handle connects. They function fine (like I'd use them myself with no worries) but I was not intending to sell anything that didn't turn out perfect. However these people have been clear that they can't afford full price.

I've been offered half price and a trade so far which I accepted because they really wanted to support me, but I honestly don't even like selling messed up stuff. I was super clear about it not being my best but they seemed happy. I don't know how to feel about it because I'd rather present my best work only but then I wouldn't be willing to compromise on price so much.

Has anyone else had this issue? Am I overthinking? I would just give them away honestly but they seemed so excited to give me something for it. Plus they've started to spread the word to other people we know that I'll sell them at a discount :/


r/Pottery • • 6h ago

Question! Etsy’s AI disappointment: where now?

67 Upvotes

Wondering where the community is looking to sell online following Etsy’s recent announcement that sellers’ work will be used to train AI models. I’m not producing quite enough work yet to support an independent storefront, and I was getting most sales through Etsy’s search algorithm. Are there any companies out there that aren’t harvesting artist’s creativity to feed the Borg?


r/Pottery • • 22h ago

Help! My dirty little secret

111 Upvotes

I’ve been potting for about 14 years. People like my work, and I’ve sold quite a few pieces over the years. I feel good about my designs and my glazing. But I have a dirty little secret: I’m a lousy potter! Specifically, after all these years I’m still struggling mightily with centering. I try hard to have well-wedged balls of clay and put them down right in the center of the wheel—but it’s never perfect. When I cone up and down, it’s always irregular at the bottom. When I open, there’s always one side that’s thicker than the other. Every potter knows how that results in a cascade of problems. I spend a lot of time and energy correcting the mistakes, shaving off one side, etc., and I do a whole lot of trimming afterwards, hopefully ending up with something that looks okay (but is far from perfect). I took lots of beginner classes when I started out, and a few refreshers since then, but the teachers don’t have all that much to say about my problem, they are more interested in different subjects. I think I’m aware of much of the usual advice: brace my arm on the tray, cut away excess at the bottom, use two metal ribs, etc. But then I watch the pros on videos, and their initial centering and opening is always perfect and takes only a moment. I can’t claim I haven’t had enough practice—I’ve made thousands of pots. Do I just lack the talent? Any advice?


r/Pottery • • 21h ago

Mugs & Cups Attempt 2 at the cat!!

Post image
126 Upvotes

I really appreciate the kind critique and feedback I got from this sub the other day! It’s still far from perfect but I’m hopeful it looks a little bit more like my loyal customers deceased cat! My first real commission and it was a doozy! I hadn’t anticipated how difficult multi colored short fur could be to paint.


r/Pottery • • 1h ago

Other Types I paint traditional tattoos on my pots. Here are some of the things I have made recently!

Thumbnail
gallery
1.0k Upvotes

r/Pottery • • 17h ago

Question! Ceramic buttons

Thumbnail
gallery
1.3k Upvotes

Hiii❤️ can someone help me on how to make this type of buttons? im new to pottery and i would really love to add this kind of buttons to my knitted cardigan. i love the tecnique they used to create the beautiful color of the buttons i need to know how!!! tysm in advance


r/Pottery • • 23h ago

Artistic WIP— of japanese incense holder

Post image
6 Upvotes

r/Pottery • • 1h ago

Bowls bowls with handles

Thumbnail
gallery
24 Upvotes

r/Pottery • • 3h ago

Question! What kind of table do you use in your home studio?

3 Upvotes

Currently using an old ikea dining table, but it’s flimsy and moves around a ton when I’m wedging. I lay Hardi Board on top of it to work on and that also shifts a ton while I’m wedging/working. I’d like something more stable and also height adjustable. Figured I’d look now to see if there are any Black Friday deals.


r/Pottery • • 3h ago

Glazing Techniques First batch glazed and ready

Thumbnail
gallery
6 Upvotes

All the things I made, glazed and ready for

final firing.


r/Pottery • • 4h ago

Help! Chipping after glaze fire

Thumbnail
gallery
18 Upvotes

So I’ve been going to a community studio, I make my things at home and fire at the studio and recently (past couple months which is the entire time I’ve been at this studio) my pots have come out with chips taken out of the foots despite having no glaze drips or anything of the sort.

Does anyone know why this is happening? It doesn’t happen to all of my pots but it happens to most ( no pattern in what chips and what doesn’t) but I’d love to know if I can do anything to prevent this because it’s really upsetting.


r/Pottery • • 8h ago

Silliness / Memes What unhinged “tools” have you used for making pottery? (Bonus if they’re funny)

27 Upvotes

I’ve used a foot scraper (bought new for clay lol) and my kids pumpkin carving knife.


r/Pottery • • 8h ago

Glazing Techniques Amaco Kiln Ice works at cone 10! 😱😍

Thumbnail
gallery
13 Upvotes

Officially cone 5/6 glazes but my studio only fires to cone 10 so I said fuck it and tried it and it came out STUNNING!! This is a double poured dummy thick layer of kiln ice snow drift over straw velvet underglaze and light green (🫣) underglaze!


r/Pottery • • 17h ago

Kiln Stuff Finally rebuilt my soda kiln 7 months after moving

Post image
9 Upvotes

Took advantage of the nice midwest weather to fire twice this week.


r/Pottery • • 17h ago

Accessible Pottery Snail pot

Thumbnail
gallery
29 Upvotes

First time I tried hand painting with underglaze. I'm super happy with how it turned out. I was blessed by the fickle glaze goddess