r/RRRE • • 16h ago

It could be a great start...

14 Upvotes

This is how one of my cleanest starts become into a sadly crash.
From p20 to p12 to p20 in the first lap.


r/RRRE • • 21h ago

Steering lock soft lock not working

2 Upvotes

I just got a new Asetek wheel and I'm having an issue in Raceroom with the steering soft lock.

Asetek have a guide for Raceroom which I have followed. What's happening is I'll set my steering lock to 1080 in Racehub and 1080 in the game to match. I've run the wheel setup/configuration in game nearly 100 times at this point.

The option to have the game auto or manually set the steering lock is greyed out and set on manual. Research tells me that is because the Asetek base isn't supported with the auto feature. The game is then supposed to use a soft lock to adjust each cars steering lock, at least that's what it says it will do.

It's not doing that. If I have both set to 1080 then every car I drives steering lock is 1080. It doesn't change from car to car like it should. If I set them both to 900 then every car is 900, they don't change. I'll jump in a Formula car and it's 1080 or 900.

It's making it really difficult to get around some hairpin corners in some cars I just don't have a tight enogh turning circle.

Does anyone know why this is happening?

In RaceRoom Racing Experience, soft lock automatically applies force feedback resistance when you reach a car's maximum steering rotation, provided your wheel rotation settings are configured properly. [1, 2]

How Soft Lock Works in RaceRoom

  • Automatic Per-Car Adjustment: RaceRoom automatically adjusts steering range and force feedback (FFB) soft lock per car while keeping the steering ratio intact. [1, 2]
  • Soft Lock Engagement: If a car's maximum rotation is lower than your configured wheel rotation, the game adds a soft lock where the car's steering maxes out. [1]

Here is a Formula car. My base and the game is set at 900. No soft lock is being applied. Shouldn't it be steering wheel range 900, car steering range 400-500 or whatever the games soft lock sets it at for this car? I'm positive that's what my G29 used to do.


r/RRRE • • 1d ago

Racerroom Drifting?

0 Upvotes

Any drifters in the chat? I am going to be trying the drift cars over the weekend and I am new to sims. I know I will be bad and thats fine my question is does anyone use the drift cars for drifting and are they solid? Raceroom has a small drift section and I hope the expand it. I think the update should be seen as a drifting boost with all the performance and responsiveness upgrades to ff. If no one has tried drifting and do like to drift I hope you try it this weekend too.


r/RRRE • • 1d ago

with a bit of luck it all cost me under 150 euros

Post image
27 Upvotes

r/RRRE • • 1d ago

TC ABS level reversed

1 Upvotes

Am I going crazy or TC and ABS are reversed now. 1 used to give the most stability and now it's 6.


r/RRRE • • 1d ago

safety rating? or how does it work

2 Upvotes

guys, how does the ratings work in raceroom online racing? is there something like safety rating and are similarly skillfull racers being matched against each other?

so far the races seem to be a mess for me. :(


r/RRRE • • 2d ago

Starting issue on Multiplayer

0 Upvotes

Hi! I’m new to this sim, and I tried multiplayer today.

In my first two races, I had the same issue: once I was on the grid during the start countdown, I couldn't do anything. My wheel didn't respond, nor did my pedals or any other buttons.

In the first race, after two minutes the car reset/took over and I started driving, while in the second race nothing happened, I could only press Esc and return to the pits.

Am I missing something, or is this a bug in the game?


r/RRRE • • 2d ago

Is the steering wheel animation FPS capped?

4 Upvotes

The game runs buttery smooth for me in VR at a glorious 120 Hz. It's almost perfect. The only issue is that the steering wheel animation doesn't seem to be as smooth as the rest of the game. It appears to run at a lower frame rate (I'm guessing 60 FPS), which is especially noticeable in cars that use a GT-style steering wheel.

Is there any way to fix this?


r/RRRE • • 2d ago

Breaking and using RRRE for learning and getting better in sim racing

1 Upvotes

Hi.

Although I race sim races since the late 90's I never paid attention to the way I was driving. So as now I am getting back to it, and always liked R3E is it considered a good platform to practice and learn?

For me since it was so strict about limits it was always difficult and frustrating.

Also I find the breaking very difficult to adapt to coming from AMS, AC and some Iracing. I use a g29. Is there specific settings or conditions I should look for when breaking? I know for example that people say AMS can handle 100% breaking but that is not good for Iracing... So I was wondering if I needed to change anny setting or adapt my process.


r/RRRE • • 3d ago

Lack of FFB resistance on the limit

2 Upvotes

I am having a great deal of trouble getting my FFB settings dialed in for Raceroom. The other sim I play the most is Automobilista 2, and in that sim, using the very popular DanielKart custom FFB file, I am learning to feel what the car is doing much better when I am at the limits of grip. I feel the resistance in the steering get stronger and the vibration in the tires as they're right on the edge of giving up.

In Raceroom I get none of that. I have an extremely difficult time telling by feel when I am close to the limit. Using the "recommended" in-game settings there is little to no feeling of connection with the car.

I am currently only using a Moza R3 (about to swap it for an R5 I found secondhand for cheap), but it's enough to make me feel like I can tell what the car is doing in AMS2. I have not found any decent settings guide for it, only for the higher-nm Moza wheelbases.

I have turned the FFB meter on in the HUD, and it indicates that it's exerting more force (for lack of a better way to put it) in corners, but I can't feel any of it. And no, it's not clipping.

Does anybody have any good FFB setting recommendations for the entry-level Moza wheelbases or general tips on how to set FFB up in this sim so that I can feel the grip (or lack thereof)?


r/RRRE • • 3d ago

Overlay RR

Thumbnail
gallery
5 Upvotes

TITINHO OVERLAY V1.0.0 Superposiciones para RaceRoom, asistente de conducción y mapa de pista con autoaprendizaje

Hola a todos,

Les presento la primera versión pública de Titinho Overlay, un conjunto de superposiciones para RaceRoom que desarrollé para mis propias carreras y que he estado probando en competición. Es una app nativa para Windows, con prueba gratuita, y planeo seguir mejorándola con futuras actualizaciones.

El objetivo era simple: superposiciones claras y fáciles de leer que muestren lo importante al conducir, con suficiente personalización para adaptarse a diferentes pantallas y estilos de manejo. Sin navegador, sin Electron, sin modificar archivos del juego: solo una app ligera para Windows que lee la telemetría que RaceRoom ya proporciona.

Esta es la versión 1.0.0. Es estable y ha sido probada en competición, y es solo el punto de partida. Sus comentarios serán clave para las próximas actualizaciones. ------------------------------------------------------------ CONTENIDO: 12 SUPERPOSICIONES ------------------------------------------------------------

- Clasificación: la parrilla completa de todas las categorías, agrupada por clase, con diferencias, intervalos, mejor/última vuelta, compuesto de neumáticos, estado de boxes y penalizaciones. Se mantiene el límite de filas con el jugador siempre visible.

- Relativo: los coches inmediatamente delante y detrás de ti con diferencias en tiempo real, compuesto de neumáticos y estado de boxes. Rango ajustable de 1 a 10 coches por lado.

- HUD del piloto: una tira de conducción compacta con marcha, velocidad, posición, combustible y autonomía, última/mejor vuelta, vuelta de sesión, acelerador/freno y luces de cambio.

- Estrategia: porcentaje de combustible, consumo por vuelta, autonomía, combustible necesario para terminar, margen, ventana de boxes, número de paradas y tiempo de la última parada. La energía virtual se muestra cuando el coche la utiliza.

  • Estado del coche: muestra la temperatura, la presión, el desgaste, el compuesto y las zonas planas de los cuatro neumáticos, además de la temperatura de los frenos y los daños en la aerodinámica, la caja de cambios, la suspensión y el motor.
  • Tráfico: muestra un mapa plano de todos los coches en la vuelta actual, coloreado por categoría, con los coches delante y detrás, y los coches en boxes atenuados.
  • Advertencias: banderas activas (amarilla, azul, negra, blanca, a cuadros, blanca y negra), limitador de boxes, estado de la ventana de boxes y alerta de coche lento delante con la distancia y la diferencia de velocidad.
  • Incidentes: puntos de incidentes contra el límite del servidor, advertencias de atajo de pista, validez de la vuelta y penalizaciones pendientes con su motivo (paso por boxes, parada y arranque, parada en boxes, penalización de tiempo, reducción de velocidad).
  • Delta: Delta en tiempo real respecto a tu mejor marca personal, con una barra de ganancia/pérdida, última vuelta, mejor tiempo de la sesión y vuelta actual.
  • Tiempos: Vuelta actual, tiempos por sector con deltas respecto a tus mejores sectores, última/mejor/promedio/óptima vuelta y tus vueltas recientes. El historial de vueltas se guarda localmente para la sesión actual, mostrando 3 o 5 vueltas.
  • Información de la sesión: Una barra delgada con el tipo y la fase de la sesión, reloj, circuito, tiempo restante, vuelta actual, combustible, desgaste de los neumáticos, puntos de incidentes y ventana de boxes.
  • Mapa del circuito: El circuito con todos los coches en su posición, coloreados según la clase, el jugador resaltado y los coches en boxes atenuados. RaceRoom no proporciona imágenes de los circuitos, así que el mapa se aprende a partir de la posición de tu coche y se guarda por circuito y trazado. Necesita una vuelta en un circuito nuevo para estar disponible en futuras sesiones. ------------------------------------------------------------ OBSERVADOR ------------------------------------------------------------

La app también incluye un observador de voz que usa las voces de Windows. Está desactivado por defecto y es totalmente configurable en Ajustes > Observador.

Alertas disponibles: - Banderas (amarilla, azul, negra, blanca, a cuadros, advertencias de límite de pista) - Coche lento delante, con distancia - Contacto / Daños - Salida de pista - Nivel bajo de combustible para las vueltas restantes - Penalizaciones - Apertura de la ventana de boxes

Hay un control de volumen y un botón de prueba de voz. Se usa el español si la voz de Windows está instalada en español; si no, los anuncios se usan en inglés. RaceRoom no tiene un evento de colisión específico, así que las llamadas por contacto se infieren a partir de cambios en los daños y, ocasionalmente, pueden activarse si golpeas fuerte el bordillo.

------------------------------------------------------------ PERSONALIZACIÓN ------------------------------------------------------------

Cada superposición se puede configurar por separado:

- Activar o desactivar.

- Escalar del 60% al 160%.

- Opacidad por superposición.

- Tamaño del texto del 85% al 135%, independientemente de la escala de la superposición, para que se lea mejor sin aumentar el tamaño de todo el panel.

- Opciones específicas como agrupar por clase, filas máximas, rango relativo, luces de cambio, combustible, presión de los neumáticos, panel de daños, alerta de coche lento, detalles de penalizaciones e historial de 3/5 vueltas.

Edición del diseño: - Ctrl + Mayús + E desbloquea las superposiciones.

- Puedes arrastrarlas a cualquier parte de la pantalla.

- Arrastra el borde derecho, el borde inferior o la esquina inferior derecha para cambiar el tamaño. - La posición y la escala se guardan automáticamente.

  • Ctrl + Shift + R restablece la configuración predeterminada.

Otras opciones:

  • Cinco colores de acento: Lima, Cian, Naranja, Rosa y Hielo.
  • Opacidad global de la superposición.
  • Superposiciones con clic durante la carrera: al hacer clic, te lleva directamente a RaceRoom.
  • Siempre visibles.
  • Mostrar las superposiciones solo mientras conduces. Se ocultan automáticamente en los menús, el garaje, las repeticiones y las pausas, y vuelven a aparecer al conducir. Editar la configuración siempre las muestra.
  • Restablecer la configuración desde los ajustes.
  • Modo de carrera de prueba para hacer pruebas sin el juego.
  • Interfaz en inglés. Todo se guarda por usuario de Windows. ------------------------------------------------------------ RENDIMIENTO Y CONSTRUCCIÓN ------------------------------------------------------------

Titinho Overlay está hecho en C# con WPF en .NET 8. Es un único proceso nativo de Windows: sin navegador, sin Electron, sin paquetes externos, sin servicios en segundo plano.

Lee la memoria compartida de RaceRoom ($R3E, API 3.6, 128 ranuras de controlador) a 10 Hz y renderiza las superposiciones con WPF. Es solo lectura: no se inyecta en el juego, no modifica los archivos del juego y no intercepta el render. Solo usa la telemetría que RaceRoom expone a apps de terceros. Por eso es ligero y seguro para ejecutarlo junto con el juego.

La compilación distribuida es un único ejecutable autocontenido, así que los evaluadores no tienen que instalar .NET ni nada más. ------------------------------------------------------------ REQUISITOS ------------------------------------------------------------

- Windows 10 o 11, 64 bits.

- RaceRoom Racing Experience en PC.

- RaceRoom en modo ventana sin bordes, para que las superposiciones externas se vean encima. El modo de pantalla completa exclusiva no lo permite.

- No se requiere instalación de .NET para la compilación compartida.

Instalación:

  1. Descarga y descomprime la carpeta.
  2. Ejecuta TitinhoOverlay.exe.
  3. Si Windows SmartScreen muestra un aviso, elige Más información > Ejecutar de todos modos. El ejecutable no está firmado digitalmente.
  4. Mantén el panel de control abierto e inicia RaceRoom.
  5. Las superposiciones aparecen cuando estás conduciendo y se ocultan cuando entras en los menús. ¿No se te ejecuta el juego? Usa "Titinho Overlay (Demo).cmd" o activa "Sample race when RaceRoom is closed" en Ajustes. La demo usa una carrera de ejemplo realista para que puedas probar todas las superposiciones, el observador y el trazado.

DESCARGAR:

https://drive.google.com/file/d/1nXPwmpsf0Mb926sJZkpEZKkCzp5FFOzC/view?usp=drive_link

CAPTURAS DE PANTALLA: 



  ------------------------------------------------------------ TECLAS DE ACCESO ------------------------------------------------------------

Ctrl + Shift + O - ocultar/mostrar todas las superposiciones Ctrl + Shift + E - editar diseño (arrastrar y redimensionar) Ctrl + Shift + R - restablecer posiciones y escala

------------------------------------------------------------ INFORMACIÓN ÚTIL / LIMITACIONES DE LA VERSIÓN 1 ------------------------------------------------------------

  • El mapa de la pista se aprende a partir de la telemetría, no de una imagen oficial de la pista. En un circuito nuevo, muestra "PISTA EN APRENDIZAJE" hasta que completes una vuelta. Luego se guarda para ese circuito y trazado.
  • Los puntos de incidentes solo se publican en servidores que usan el sistema de incidentes, generalmente en clasificación multijugador. En otras sesiones, el contador puede mostrar un guion, mientras que los avisos de atajo y las penalizaciones siguen apareciendo cuando el juego las detecta.
  • Las alertas de contacto se infieren a partir de cambios en el daño, porque RaceRoom no detecta eventos de colisión.
  • RaceRoom no proporciona la geometría de la pista ni las temperaturas climáticas a través de esta interfaz, así que el mapa se está aprendiendo y algunos valores del clima pueden no estar disponibles.
  • Solo para Windows. El ejecutable no está firmado, así que SmartScreen o un antivirus pueden pedir confirmación.
  • Solo se puede ejecutar una instancia de la app a la vez. ------------------------------------------------------------ VERSIÓN 1 Y FUTURAS ACTUALIZACIONES ------------------------------------------------------------

Esta es la versión 1.0.0: incluye las 12 superposiciones, el observador, el mapa de la pista y el editor de trazado completo. Planeo seguir actualizándola con correcciones, nuevas opciones e ideas de la comunidad. Si la pruebas, por favor dime:

- qué coche y pista usaste, - qué funcionó y qué no, - qué superposición o alerta te gustaría ver, - y si detectas algún error en la sincronización o la telemetría.

Leo todos los comentarios y las futuras versiones se basarán en ellos.

------------------------------------------------------------ CRÉDITOS ------------------------------------------------------------

Creado por Titinho, un piloto de simuladores de carreras, para la comunidad de RaceRoom.

Titinho Overlay es un proyecto comunitario no oficial y no está afiliado a RaceRoom, KW Studios ni Sector3 Studios. Lee la memoria compartida en modo de solo lectura y no modifica el juego.

Gracias por probarlo y ¡que lo disfrutes!

EDIT - V1.0.1 ya está disponible. Corrige los tiempos de vuelta en Clasificación/Relativo: RaceRoom reporta los splits de sector por conductor de forma acumulada, así que el último split se usa ahora como el tiempo de la vuelta. Por favor usa esta versión en lugar de V1.0.0.

EDIT 3 - V1.0.2 ya está disponible. El HUD (velocidad, marcha, RPM, acelerador/freno y luces de cambio) ahora se actualiza a la tasa de la pantalla (hasta 60 Hz) en un bucle en segundo plano,
mientras que las tablas se quedan en 10 Hz. Esto elimina el retraso y el micro-tartamudeo en el medidor de velocidad. Por favor usa esta versión en lugar de V1.0.1.

EDIT 4 - V1.0.3 ya está disponible. El Estado del coche se rediseñó como una vista cenital: cuatro llantas con temperatura, presión, desgaste y temperatura de frenos, agua/aceite/combustible en el centro, y una franja de daños compacta. El arreglo del tiempo de vuelta y la actualización del HUD a 60 Hz de las versiones anteriores están incluidos.

EDIT 5 - V1.0.4 ya está disponible. El Mapa de la Pista ahora es una superposición limpia y transparente:
solo la línea del circuito y los coches numerados coloreados por clase, sin tarjeta, título,
pie de página ni fondo. El jugador está resaltado con un anillo extra.

V1.0.5 — Cleaner timing, calmer screen

• Timing rebuilt: current lap first, session/personal best, last, average,

optimal and estimated times, S1/S2/S3 deltas and recent laps with deltas.

• Delta reduced to a thin gain/loss line and one large number.

• Warnings are now event-only: they appear when something happens and hide

themselves when the track is clear.

• Global text size control for every overlay, plus a legibility pass.


r/RRRE • • 3d ago

AI so aggressive, Adaptative AI is the answer?

3 Upvotes

Hi all,

I don't have to much experience in simracing (around 60hours in RaceRoom), but I find very difficult to practice against AI. I also try AMS2 and meanwhile can enjoy a nice fight, less "pushy", I wanna race online in the future and not only with CPU.

If I set diff to 90-92, becomes too easy and the AI makes a lot of mistakes.
If I set diff to 98-100 (or higher), goes very aggressive, sometimes goes faster than leaderboard records and even randomly hit me in the middle of a straight line

It's 94-96 the "most realistic scenario" for practicing before an online race or I should try use adaptative AI until they can be clean and fast to be fun?
Of course I make a lot of mistakes, but at least I try to be clean as possible.

Thanks!


r/RRRE • • 3d ago

so the steering range for the tatuus f4 is really 288?

2 Upvotes

it seems quite low, or is that correct?


r/RRRE • • 3d ago

Le Gare Competitive sono da sistemare

0 Upvotes

Ho appena finito una gara competitiva con le formula 4 a monza, finito è dire un parolone, sono stato squalificato; la curva 1 è andata meglio di quanto mi aspettassi, ma subito dopo mi sono ritrovato uno con 150 di Ping addosso e già li ho fatto 15 punti, poi nel resto della gara tra toccate mie incidentali e chi non riesce a guidare ho fatto gli altri 15, non do la colpa ai giocatori, ci sta non avere una connessione perfetta, nemmeno io, però se arriva a 150 di Ping una controllatina la darei, e anche a Raceroom, sono stato squalificato perchè non c'è distinzione tra chi tocca me e chi tocco io, e c'è differenza tra queste due cose, quindi per favore, per il benessere di tutti, date una controllata anche a quello. Grazie per lo sfogo.


r/RRRE • • 3d ago

Found a solution for steering rotation behaving strangely

1 Upvotes

I'm new to RaceRoom.

When I set up my steering wheel, I noticed some strange behavior regarding the steering rotation. On the track, the car could barely make a turn; I had to rotate the wheel about two full turns for it to respond like a car normally would when cornering. If you are experiencing this, here is the solution that worked for me:

My direct-drive wheel base—from a Brazilian brand called PRS—wasn't being properly supported by the game. It seems this issue likely occurs with wheel bases from less mainstream brands or custom-made units.

When you configure your steering wheel and pedals, the game creates a configuration file. You need to locate it here:

Documents\My Games\SimBin\RaceRoom Racing Experience\UserData\ControlSet

Using Notepad, open the `.rcs` file corresponding to the profile you used to set up your wheel and pedals.

Look for the lines containing:

DeviceName[00]=
DeviceId[00]=

In my case, it looks like this:

DeviceName[00]="DDW PRS"
DeviceId[00]="(2685735423, -1, -1, 0)"

This "DeviceName" and "DeviceId" is what we need.

Next, go to:

SteamLibrary\steamapps\common\raceroom racing experience\Game\GameData\General

Open the `steering_wheels.xml` file using Notepad.

Inside, you will see a list of devices supported by the game, along with their configuration values. Essentially, you need to copy the template for one of these entries and paste replacing the `DeviceId` and `DeviceName` with your own. My case, for example:

<key type="uint32">2685735423</key> <!-- DDW PRS -->
<value>
    <vendorSpecificRangeLock type="bool">true</vendorSpecificRangeLock>
    <minWheelRange type="uint32">90</minWheelRange>
    <maxWheelRange type="uint32">1080</maxWheelRange>
    <alwaysCreateEffects type="bool">true</alwaysCreateEffects>
    <supportsSpringEffect type="bool">true</supportsSpringEffect>
    <supportsDamperEffect type="bool">true</supportsDamperEffect>
</value>

"2685735423" is the DeviceId for my base, and "DDW PRS" is the DeviceName.

Note that for <maxWheelRange, you should enter the value that your steering wheel driver is set to for maximum rotation—in my case, 1080.

You can test the other values ​​like <vendorSpecificRangeLock, <alwaysCreateEffects, <supportsSpringEffect, <supportsDamperEffect by switching them from "true" to "false" (and vice versa) to make your wheel works correctly. In my case, setting all the values ​​to "true" made everything work perfectly.

Another thing: Disable the option to see the driver's arms while in cockpit view, as this limits the steering wheel animation to only a 360-degree rotation.


r/RRRE • • 4d ago

Game acting up weird after a few laps in VR.

1 Upvotes

Hi guys,

Now that the game is looking good in VR (choosing the DXVK/openXR option to start) I get the following problem: after a few laps (any car, any track) the CPU frametime is going way high (from lets say 7 up to 16, something like that) and this happens all of the sudden.

When I have my hud on, it start 'sticking to my goggles' a bit, moving somewhat with it and not. When escaping, the normal menu's are doing this also. Trying another car/track and not going out of the game first, makes the steering wheel go batshit crazy and I had to push the killswitch even.

I checked my cpu if there was nothing in the background, checked the whole system as far as I can, but found nothing off.

All other games are okay, it's just this game.

How do I go about this? Is it a known thing maybe even?


r/RRRE • • 3d ago

RR has lost its spirit

0 Upvotes

The Spectrum of top-notch drivers with professional equipment to absolutely kids with experience in Mario Kart and smol d!ck energy is not doing well, for me.

Some players lag with pings above 200, and you know that means crashes all over.

In a Nordschleife 30 Minute / 30 incident points game, you get 10 to 15 Points in the first 2 corners by just exsisting.

After last weekend my reputation fell from ~86 to ~68, my rating from ~1700 to ~1500, my worldwide postion from ~2000 to 9000, i had 5 dsq & dnf in a row, while usually finishing every game by 95 %.

You cant have nice things in this world.


r/RRRE • • 5d ago

There's a lightweight D3D9 wrapper to run RaceRoom on Triple Screens WITHOUT Nvidia Surround (Open Source)

8 Upvotes

Hey everyone,

like many of you, I wanted to run RaceRoom after the latest update on my triple-screen setup without constantly toggling Nvidia Surround, fiddeling with ResizeRacoon and messing up my multi-monitor (5) Windows desktop layout.

As I was not able to get it working with Resize Racoon and also not with the CustomDSR Tool; I was close to giving up. But there's a solution now...

How it works:
Instead of forcing window sizes externally, a D3D9.dll-wrapper appends your triple-screen resolutions (like 5760x1080, 7680x1440, or 11520x2160) directly to the adapter mode list that RaceRoom reads on startup. Once selected in the video menu, RaceRoom creates a real back buffer at that size and uses its native triple-screen projection and FOV settings.

Key Features:

  • No Surround / Eyefinity needed: Keeps your independent Windows monitor layout intact.
  • Plug & Play: Just drop d3d9.dll and RaceRoomTriple.ini into Game\x64 and run the game in Borderless Window mode (it doesn't work with Fullscreen mode).
  • Customizable: Configure custom resolutions (including bezel-corrected widths) and refresh rates via the .ini file.
  • Open Source: Written in C++/Zig under the MIT license, with SHA256 checksums provided for the release builds.

Important Notes:

  • Only works with the 64-bit DirectX 9 version of RaceRoom (DXVK and proxy-chaining with ReShade are not supported).
  • Unofficial community tool – use at your own risk (same category as ReShade, leaves game files untouched).
  • KW Studios is not involved directly or indirectly. I tried to get into contact with them to talk about it, but they didn't react. So here it is for all the people that are having the same problems.

Download & Source Code:
https://github.com/PascalWattler/Raceroom-Triples

Note: I built this for my own and it's working great for me, so I polished it a bit and decided to share it with the community. Feel free to test it, open issues on GitHub, or fork it if you want to build on top of it! Maybe this approach works for other games, too.


r/RRRE • • 4d ago

FFB Settings for Simagic Alpha Evo Pro?

2 Upvotes

Hey yall, im new to this game and Simracing in General and wanted to give it a proper try. I just cant seem to get the right FFB Settings in my base. Cars feel wonky, I dont feel the tires good enough, idk its just weird.

Anyone willing to Share their base Settings + Ingame Settings which work for them, so I can tweak from there? Thank u in advance!


r/RRRE • • 5d ago

RaceRoom HUD showing no data? SimPro Manager 2.1.8 was the culprit—upgrading to 3.2.4 fixed it

3 Upvotes

Posting this in case it saves someone else some troubleshooting. ChatGPT was used to help troubleshoot and wrote this summary. Also, it wrote a quick app to monitor the telemetry in a window so I could narrow down the cause. Pretty cool stuff.

I’m running RaceRoom’s November 15, 2026 update with the COSMO HUD, using a Quest 3 through Steam Link and DXVK/OpenXR.

The HUD appeared normally, but gear stayed on N, speed and timing showed zeros, and tire data was empty—even while driving. Only the FFB graph worked. Racing Overlay also received no data, and the issue persisted outside VR.

We checked RaceRoom’s $R3E shared-memory telemetry directly. With SimPro Manager 2.1.8 running before RaceRoom launched, the entire mapping contained zeros, including an API version of 0.0.

The key was startup order:

  • SimPro 2.1.8 first → RaceRoom: telemetry broken.
  • RaceRoom first → SimPro 2.1.8: telemetry worked.

Closing SimPro after RaceRoom had already started didn’t restore telemetry; RaceRoom needed a restart.

The fix was installing SimPro Manager 3.2.4. SimPro 3 is a separate application from SimPro 2, so check which version you’re actually launching.

With 3.2.4 running before RaceRoom, telemetry now updates correctly and the HUD works. I also confirmed it after connecting my Simagic GT Neo and updating its firmware.

If you’re stuck on V2, launching RaceRoom before SimPro worked as a temporary workaround. This fixed my setup; hopefully it helps someone with the same symptoms.


r/RRRE • • 5d ago

Game blacked out mid race

4 Upvotes

It happened twice during the last 10 days or so, is it just me? Is it a known issue?

The game just decided to alt+F4 for no reason

Back to the desktop image with a strong desire to bite the wheel


r/RRRE • • 5d ago

What car for ranked racing?

4 Upvotes

Hello!

I just joined rrre a couple of days ago and started at a free ranked race. I noticed all the tracks are cycling every week?

Now my real question is, what mode do people play most? I like the gt3 mode myself but I can’t figure out what car to buy since I am worried that the car I choose is maybe not going to be in the ranked system often.

Also: is there any reccomandations for tracks?? (I like spa, but everyone does probably!)

Thanks guys (:


r/RRRE • • 5d ago

Stats not saving correctly?

2 Upvotes

Does anybody else have issues with the statistics not saving everything properly? Been a few times already where things seemed suspicious to me and now i also have a couple times where i know for a fact things arent what they should be. The statistics returning was one of my highlights of the last big update but if theyre not accurate that kind of defeats their purpose..


r/RRRE • • 5d ago

Logitech PRO base with a third-party wheel — steering won’t bind

1 Upvotes

Posted this guide to the Steam Guides Section; posting here in case other need the help. Everything below this paragraph was generated by OpenAI ChatGPT Codex which helped troubleshoot and execute the repair.

This workaround got my Logitech PRO base working with a third-party steering wheel in RaceRoom Racing Experience version 0.9.9.27, Build ID 26673316 — the November 15, 2026 update, running on Windows.

Fix:

This workaround got my Logitech PRO base working with a third-party steering wheel in the November 15, 2026 version of RaceRoom.

My setup

  • Logitech G PRO direct-drive wheelbase, operating in PRO mode.
  • SIMAGIC GT Neo steering wheel, fitted to the Logitech base using an aftermarket adapter. The GT Neo connects separately to the PC by USB for buttons and paddles.
  • Logitech PRO Racing Pedals, connected separately by USB.
  • Thrustmaster T500 RS Gear Shift, also connected separately.

With this adapter setup, I cannot switch the Logitech base into G923 compatibility mode, so the fix needed to work in PRO mode.

The problem

The base appeared in Logitech G HUB and Windows Game Controllers (joy.cpl). Its steering axis moved smoothly in Windows throughout troubleshooting.

In RaceRoom, however:

  • The base would sometimes detect the first steering movement.
  • The binding displayed only ID:1, without an axis suffix.
  • Steering then stopped responding, sometimes remaining at full left.
  • Force-feedback settings were greyed out.

Disabling Steam Input and restarting RaceRoom did not resolve it.

What fixed it

Manually editing the steering bindings in a copy of RaceRoom’s controller profile restored the steering axis and made force-feedback settings available.

Step 1: Back up the profile

Close RaceRoom, then locate your controller profiles:

%USERPROFILE%\Documents\My Games\SimBin\RaceRoom Racing Experience\UserData\ControlSet

If your Documents folder is redirected to OneDrive, look there instead.

Make a copy of your custom .rcs profile. Keep the original as a backup.

Step 2: Name the test profile

Open the copied .rcs file in a text editor and change its internal name:

Name="PRO Axis Test"

Save it with a distinct filename, such as PRO Axis Test.rcs.

Step 3: Identify the base’s device index

Find the Logitech PRO base in the profile’s device list. Mine was:

DeviceName[03]="Logitech G HUB PRO Racing Wheel for Xbox and PC USB"

The base was device 03 in my profile. The GT Neo, shifter, and pedals were separate devices.

Your device index may differ. Use the index assigned to the Logitech base—not the GT Neo.

Step 4: Correct the steering bindings

My non-working left binding was:

Control - Steer Left="(1, 160, 3, 7)"

Right steering was unassigned.

I replaced the two steering entries with:

Control - Steer Left="(1, 2, 3, 0)"

Control - Steer Right="(1, 1, 3, 0)"

The third number, 3, corresponds to my base’s DeviceName[03] entry. Substitute your base’s index if different.

Step 5: Select and test

Save the file, launch RaceRoom, and select PRO Axis Test under Controls → Controller Profiles.

Turn the wheel and check the steering indicator before running the wizard or rebinding steering.

Check the remaining controls too. I had to remap the GT Neo and T500 shifter after loading the test profile.

Result

The Logitech base immediately provided working steering input. Force-feedback settings were no longer greyed out, and after adjusting FFB, everything worked on track.

The setup remained in PRO mode, with the third-party GT Neo wheel and aftermarket adapter installed. No G923 compatibility mode was needed, and I did not manually change the profile’s FFB device-name setting.

This workaround resolved the issue on my configuration. It points toward a steering-binding capture problem, although the underlying cause is unconfirmed. Keep a backup of the working profile before using the steering wizard again.

Posted to Steam Guides as well

https://steamcommunity.com/sharedfiles/filedetails/?id=3841026868