r/RX7 • u/simpletonl0l • 22h ago
New addition to the family
Also my first post on here :)
r/RX7 • u/simpletonl0l • 22h ago
Also my first post on here :)
r/RX7 • u/FallaciousBob • 17h ago
I posted here a few days ago asking for info and yall gave me some really good info. some people wanted a progress update so here you go. if anyone has a motor they wanna try this on we can talk, I just need help with gasket matching.
r/RX7 • u/H4Life_1223 • 1d ago
I left my FEED FD back in Sydney when I relocated overseas.. Browsing my one drive and came across a pic and used AI to remove the garage clutter (car is real I assure youš).. I miss it so much!
r/RX7 • u/kasekaki • 1d ago
ā87 TII purchased when I thought there was just one little rust hole, turns out thereās quite a bit more, on both sides of the floor panā¦
I was planning on sandblast and painting, but this is looking like it all need quite a bit of welding work too
Not particularly attached to the shell, but when do you guys make the call to just get another one?
r/RX7 • u/Economy_Advantage171 • 2d ago
Finally got some new parts in new fans and motors installed along with new intake(I know hot air and not some peopleās fav) but my oem box decided to be old and shatter new intercooler(thatās to big I will fabricate a duct for it one day).hope everyone has a good thanksgiving šš¼
r/RX7 • u/Suitable_Handle2910 • 3d ago
Been thinking about checking this rx7 this weekend to see. Has anyone checked it out yet it's been up for a while and wondering why it hasn't sold yet?
r/RX7 • u/Skyr_was_taken • 3d ago
I am a big e36 guy but Iāve always wanted a rotary. This is my new to me fc rx7 :)
Itās an N/A auto and someday Iād like to make it a manual but until then I have and will continue to enjoy cruising around with it!
Lots of people said Iād never like the car stock and that they needed to be manual but this car has so much charm.
r/RX7 • u/knuckles209cp • 2d ago
So, Been trying to diagnose this with no luck. Its almost like a loose bolt sound, It matches the rpm, ive done several heat cycles ( went from a street port, to a half bridge NOT TUNED YET )
Ive put a pry bar as a stethoscope, i found it the loudest when on TOP of the upper intake manifold, around the middle, but when i use it on top of the irons , the sound isnt as loud. Im very confused, It hasnt got worse or better since starting it, so its not developing. Do I go for a dyno tune and hope that its something to do with the air/fuel mixture? ..... WTF?
r/RX7 • u/mazdadan7 • 4d ago
Honestly these two were the cars I dreamt of in the late 90ās. A white 94 and a real 89 turbo 2
r/RX7 • u/Free-Chemistry2104 • 4d ago
Heres my mostly standard RX.
Only mods so far are coilovers and a catback made to replicate the oem one.
Few mods ordered and waiting to be manufactured and shipped from Japan. No overnight parts here, 16 week wait.
Going with basic boltons and no more (for now).
I like the 90s power delivery of the twin turbos and Iām not chasing power.
Mods will be as follows.
Autoexe carbon intake
Feed sonic ti catback.
Apexi ecu
Ohlins coilovers.
Powerflex bushes and oem bilowball.
Autoexe gear knob (replacing and awful re-amemya one)
Personal grinta leather and back stitching.
r/RX7 • u/Im-radarr • 3d ago
Hi guys, I was using the bread trick to push out the pilot bearing on my FC. Unfortunately I missed and smacked the flywheel with the hammer. It left this small dent on the flywheel. Ive run my fingernail over it and it doesnt catch on anything but do I need to get it resurfaced/replaced?
r/RX7 • u/nostalgicarchive • 4d ago
Very content with where the project is at. Love driving this thing around town. 12 years of ownership and very proud of it!
r/RX7 • u/240zseries1 • 4d ago
Whatās up, progress pick for yall, post yours
@primesauto704
r/RX7 • u/FallaciousBob • 4d ago
Iāve been working on a design for a variable intake runner for an rx7 based on the 787b motor. I have most of the main design out of the way, but thereās a few things Iām missing. From the limited information out there on the r26b Iām guessing the throttle plate is at the end of the telescoping runners, as there is a cable running to them in most pictures. Does anyone have more information on the design of the intake, or links to technical drawings for the motor?
ps: if anyone wants the design I can send it to you, I donāt have the motor im gonna put this on yet so Iām curious to see how good my gasket matching was.
r/RX7 • u/MakingPeachesHappy • 4d ago
Behind the door lock tumbler, is a switch for the security system and it appears to have gone bad (security system going off when unlocking/opening) I'm having trouble finding a replacement for it.. obviously I'm going to fix the POs wiring debacle while I'm in there.
Do I have to buy a new door handle or where can I just buy the new switch and wiring?
Note: I traced the blue wire back to 1N on the CPU and black ground. The white wires I'm assuming are for the light?
r/RX7 • u/yogurt3488_ • 5d ago
Some of yall might have seen this video before. I really love the look, but i canāt tell what it is. Is it just a BN Sports kit?
r/RX7 • u/heisenGLR • 4d ago
I have no business being here in this thread but wanted ti share what I saw on road yesterday
Mazda 2 wanna be a rx7
r/RX7 • u/mark_david777 • 6d ago
Iām not sure if this is an authentic Amemiya build, but itās definitely Amemiya-inspired. It was one of many highlights of a car meet I attended in October.
r/RX7 • u/Agitated_Guidance206 • 6d ago