r/Reaper • • 6h ago

Discussion What I made with REAPER - week of November 22, 2026

3 Upvotes

What is something you made with REAPER that you'd like to show us and get feedback on?

Please post full links (no shorteners) to content you would like to showcase! A short description of your process, gear, and plugins used would be helpful.

Please give feedback to what others post here!

Previous Made With REAPER


r/Reaper • • 1h ago

help request Gain automation vs volume automation help

1 Upvotes

So this question isn't really about what the difference is. Gain automation is pre-fader, inserted plugins will be applied after, into the volume fader.

Volume automation is literally automating the volume fader, gain and plugins aren't affected.

The trouble I always had when automating volume on certain tracks is that I lost control over the volume fader, it would jump back to the level it was at that specific timestamp if I tried moving the fader. So if I had volume automation on a track, I would have to go in and automate even the smallest changes. I'm aware that I can also use Latch instead of Read, but using Latch also means that every single touch of the volume fader creates a point, and in a lot of cases I'd have to go back and clean those up. Unless there's a setting I might've missed?

I was watching some educational content and there I saw that you can also use a gain plugin, which is then inserted at the end of the FX-chain, so no plugins are affected. Then you can just automate the gain parameter, and you basically have volume automation, without giving up control over your fader.

I was wondering, does this affect anything? This way, the region gain isn't affected and you just created a volume knob/fader before the actual volume fader in your DAW, so the volume fader can stay in one place. It seems like a nice workaround, but maybe I've just been stupid all these years and this is how the pros do volume automation. I wanted to hear your thoughts!


r/Reaper • • 9h ago

discussion Learning Reaper Tip

0 Upvotes

I've been using Reaper forever, but there are still things that slow me down or don't work as expected. It's worse if I've stepped away for a few months. This really helps, whether you're experienced or a beginner:

I created a Project in Claude or ChatGPT, then downloaded the Reaper User Guide to a common location in the LLM project. Any time I need help on a topic, I create a new chat specifically for that topic. For instance: How do I get Reaper to change the speed of an audio track by using the tempo value, but without changing the pitch or losing my marker/region settings? Or... Why don't the knobs on my M32 affect the Komplete Kontrol plugin knobs?

Then I have a history of all the problems I've solved without having to go back and relearn (ReaLearn?).

I also tell the LLM to ALWAYS review the User Guide as its first go-to for answers. No guessing!

Here's the latest copy of the User Guide: https://www.reaper.fm/userguide/ReaperUserGuide786c.pdf

You can also add any other user guides to the project to help. Anyway, this has definitely speeded up my progress. Good luck out there. Reaper is AWESOME!


r/Reaper • • 14h ago

discussion reaper config (what you think need)

2 Upvotes

Hello! I’ve long wanted to create a simple configuration for beginners, but the installation process was the main thing holding me back—creating a tutorial for it felt like it would be more tedious than just building a custom setup from scratch. However, with the introduction of `.reaperpkg` files, this idea might finally be feasible, and it should work across different operating systems. For now, I’m focusing on Linux and Windows (I assume that if it works on Windows, it will also work on macOS—though I’ve never actually used a Mac, so I’m not sure if there are any configuration differences). I’d love to hear your thoughts: what kind of settings do you think would be perfect for beginners? I plan to keep things as "vanilla" as possible—though if it becomes possible to include a ReaPack installation within a `.reaperpkg` file, I might create an "advanced" version that includes scripts.


r/Reaper • • 20h ago

help request How do I stop automatic resampling of my files to the project sample rate.

2 Upvotes

For example, I would like this file to stay at 11kHz, as I intentionally made it that sample rate with the batch item converter, just for it to automatically be undone. I have not been able to figure out the setting to change this. It would be nice if it prompted me and asked me if I wanted to resample it, like how it asks me for other things.


r/Reaper • • 22h ago

discussion Anybody knows some cool VSTs and Plugins to use in order to make A Tribe Called Quest type beats and music?

0 Upvotes

I am looking for VST and Plugins that I can use to simulate that sound that ATCQ has, and which I want to achieve.

The vinyl crackling, the VHS sound, the Cassette Tape sound, reverb, delays, distortions and basically everything that makes ATCQ unique within sound engineering.


r/Reaper • • 1d ago

help request ReaStream not found on OBS?

4 Upvotes

I just reinstalled everything on a new PC and I have to remake a lot of things to get the settings I need. I use ReaStream on my OBS to playback Rocksmith 2014 Audio with ASIO, but it is only ever reliable with ReaStream. The problem is the VST plugin doesn't appear. It will appear if I place the DLL files in there, but it won't work. No audio.


r/Reaper • • 1d ago

help request Any way to have new project tab default to open protect instead of save?

0 Upvotes

The way I use reaper when I start a new project tab I want to open an existing project more so at home rather than a new project although sometimes I will want to have a new project is there any way to have this default or the option when I open start a new project tab that it would give me the open dialogue or an option to get there.


r/Reaper • • 1d ago

help request Clicking sounds in Reaper

2 Upvotes

My Reaper makes weird noises. I use Gojira x plugin for recording and never noticed those clicks before. Maybe because i usually play heavy riffs and cannot physically hear it? This time i tried something lite and noticed annoying clicks that stay even after rendering. Also tried different guitars, cables and USBs. I'm pretty bad at using Reaper and tried to play with buffer size but nothing helps. At first i thought it "clicks" only when plugin is ON but later noticed it stays even when its OFF.

I have 32gb of RAM and i5-14400f which is more than enough for Reaper i guess?

Thanks in advance

EDIT: Fixed


r/Reaper • • 1d ago

discussion Making the switch...

9 Upvotes

Been running Ableton for the past decade, looking to challenge myself to something new. Joel swears by Reaper, looking to be sold to switch lol.


r/Reaper • • 1d ago

discussion ¿Trucos de REAPER “nicho” que te han cambiado la vida?

11 Upvotes

Quiero leer sus trucos, comandos o cualquier funcionalidad de REAPER que les mejoró la vida.


r/Reaper • • 1d ago

help request Music Production PC Specs

6 Upvotes

I need to upgrade my computer situation and am looking at a desktop with these specs.

https://magicmicro.com/catalog/amd-ryzen-7-music-production-system-x3

Is this good enough for running Reaper and a bunch of plugins? My projects usually run about 30-50 tracks.


r/Reaper • • 1d ago

help request Does anybody have any good + free VSTs for reaper that are good for making more like cute j-pop music?

Thumbnail
gallery
28 Upvotes

Hiyaaa!! I'm working on a music project and trying to get into composing some songs, but I'm having issues finding ones that sounds nice and are free. I want the song to be heavily j-pop inspired and definetly on the cute girl idol group side. Some sounds that I like are for example Candye Syrup, CANDY TUNE, Phantom Siita (esp the mermaid song from them), and even some vocaloid producers like MARETU and Kairikibear.

Please share if you have any knowledge of VSTs that might be good to use for this, I really need help with this🙏


r/Reaper • • 1d ago

help request Glue items feel like error buggy with new update

0 Upvotes

As the title... I just update reaper but feeling kinda have error with glue items...​​​​
Mostly, when I done the recording I always set (at properties setting), "use this tempo ignore project setting". And change the project setting to fit ending enough tails. It has no issues until this new update.
but with this, the midi when I export it dont have the actual midi "blank part" the getting cut off. Further more, when I import (the change and glue items one). It has the "board" on the import screen. It say "always prompt stretch audio" or "never stretch audio". Is that really bugs recently?
and I kinda really OCD about "prompt" word, Is that reaper become vibe code software? (


r/Reaper • • 2d ago

help request Does the Avid Fast Track Duo work for Reaper?

2 Upvotes

I bought an Avid Fast Track Duo at an electronics store a couple of weeks ago, and while I can hear what I'm inputting through my headphones, Reaper is simply not picking up any audio from it. Do I need a specific driver? I know they're kind of used mostly for Pro Tools


r/Reaper • • 2d ago

help request Plugin UI too large

3 Upvotes

Hello everybody, I need your help as I have somes plugins that are too large for the fx window (even in floating on in fx docker) like in the picture:

I have tried to check the hdpi comptibility but it changes nothing, same for the automatically fx resize and for this plugin in particular, I have set the UI size to the minimum.

Is there a way in reaper to manually resize the fx UI so it appear smaller but with everything visible?

Thanks in advance for your answers


r/Reaper • • 2d ago

discussion Methods of collaboration for a band?

8 Upvotes

In a perfect world, my band mates (2 guitars, bass and drums) would all be able to open up the same project file and record our parts independently. I made a sweet template that uses tone3000 and SSD5 free so our drummer can do his ideas while not having access to his kit. The idea of being able to have a most recent copy of the project for everyone to work off of would be sweet.

Has anyone had any success doing something similar? What’s your setup and approach?

Life is being life right now but we all want to continue writing as much as we can independently.


r/Reaper • • 2d ago

help request How would you play a midi device out of a speaker to use live?

4 Upvotes

If I’m using a synth plug in and using reaper as the DAW and am playing through a midi device, how do I play it out of a speaker or amp if I wanted to use it in a band setting? Right now i‘m only hearing it in my headphones. My interface is a Scarlett 4th gen 2i2. I’m sorry if this a basic question but it’d be very helpful. Thank you. Do people use Reaper live like this or would Ableton be better for this situation?


r/Reaper • • 2d ago

discussion Have any of you tried Mini Macro Maker by Pluglet?

0 Upvotes

It seems like it would be an amazing tool but it barely has any traction. I'm probably going to buy it, and was curious if anyone had some thoughts on it

https://www.pluglet.net/mini-macro-maker

https://youtu.be/o-leb0uB-AY


r/Reaper • • 2d ago

discussion Audition 2 users .ses files

1 Upvotes

I’ve been a REAPER user going back to almost day one - back in the day I used AA2 (for 3 or 4 albums…) and I still have the .ses files and all the tracks. At some point a drive died or I migrated to Win 7 up to Win 10. Adobe in their wisdom turned off their SN AUTH servers… so no go on the reinstall - and AA3 was no longer available for download…
Flash FWD to 2026 and I (with some help) cobbled together a Python script for…. Porting .ses files to .sesx then to .rpp.
Just testing it now - imagine the joy of opening an AA2 session in Reaper… intact… with all the tracks in the right place!

My question: how many folks out there have .ses files and audio kicking about that’ they’d like to hear again and maybe remix?

Show of hands.


r/Reaper • • 2d ago

resolved What if REAPER Notator got an all-in-one Piano Roll with independent Played & Written Durations tomorrow? Pro Feature right?

Post image
6 Upvotes

First of all, I’m super grateful for the discussions on VI-Control and for all the great questions so many of you have been asking. Those conversations and suggestions helped solve the final missing piece of the puzzle — special thanks to MSTS Music (aka Tapio Säyppö) on VI-Control!

With that last piece in place, REAPER Notator now has a fully working Piano Roll complete with independent Played Durations — meaning you can extend and overlap MIDI notes for realistic legato and pre-roll playback without changing the written notation in the score. That’s a true pro workflow feature that, right now, only one of the big commercial notation suites offers, and in a very different way. Ours brings everything together in one unified Piano Roll (plus multi-track stencil layers, a playback-only humanizer, custom drum maps, and live chord analysis) with just a few tiny guardrails — so overlapping notes are finally no longer an issue.

I’ll roll out the update tomorrow evening (fingers crossed)!

more on Vi-Control: https://vi-control.net/community/threads/reaper-notator-major-update-soon-piano-roll-played-written-durations.175641/page-8#post-5933378

or on Reaper Forum: https://forum.cockos.com/showthread.php?t=312101


r/Reaper • • 2d ago

discussion Let's Mix a Live Show with Ponddigger!

Thumbnail youtube.com
3 Upvotes

I did a live stream earlier this week to mix a live show of a Kentucky-based sludge/doom band called Ponddigger. Might be worth checking out if you're interested in mixing techniques or maybe just want to hear an awesome set.

The set was recorded at Growler's in Memphis, TN on October 17th for Delta Doom Fest.


r/Reaper • • 2d ago

help request It's been several updates with no fix to the automation are they planning on doing this ?

0 Upvotes

Works sometimes other no ? Usually have to reboot when it glitches ?


r/Reaper • • 3d ago

help request Re-syncing Teams video in Reaper

1 Upvotes

Hi. So I found an online cropping thing for my earlier issue, now I have another problem.

The video I'm working on, was recorded in Teams, by my co-host. It isn't very good quality, but I only need a small clip.

Part way through the bit I need, Teams did that thing where there's a screen freezes for a couple of seconds, then it runs in fast-forward to catch up.... but then, for another 30 - 40 seconds, it's completely out-of sync, until it sorts itself out... but those 30-40 seconds land right on half of the bit I need.

How do I re-sync my audio to my video in Reaper?

I've Googled this, and a couple of pages say, just pick a sharp sound on the audio waveform, and drag the video waveform to match it (Or vice versa)

But the problem is... I don't have a video waveform. I've been right through all the settings and I can't see a way to pull it up.

Can anyone help? Is there a way to view the mp4 video element and audio elements as different waves, so I can re-align them? ...or jus the out-of-sync part?

Thanks.