r/ReelToReel • • 11h ago

Help - Equipment Otari MX5050BII-2 Pinch Roller Issue

Thumbnail
gallery
27 Upvotes

Picked up this Otari in fantastic shape for an amazing deal. Everything appears to work as expected other than one key issue - the pinch roller and tape lifters are stuck, and the roller won't engage the tape.

The issue appears to be mechanical, possibly with the pinch roller assembly itself. Neither the pinch roller nor the tape lifters will budge whatsoever when I try to physically move them.

You can see in this video when pressing play, the mechanism tries to move but won't fully engage to bring the pinch roller down against the capstan.

I also tried moving the arm above the pressure adjustment nut and spring by hand, but it won't budge at all. I'm assuming it's seized up due to old grease, which may be causing the issue.

What do y'all think?


r/ReelToReel • • 15h ago

mastering house music

Thumbnail
youtu.be
17 Upvotes

reel to reel mastering house music


r/ReelToReel • • 20h ago

That went fast

Post image
25 Upvotes

r/ReelToReel • • 17h ago

Finally (kinda) fixed the rec circuit on my Sony tc-280

11 Upvotes

The switches were dirty I tore it apart and I cleaned the contacts now I can listen to sleep token on open reel tape 👍


r/ReelToReel • • 1d ago

Tascam 388 replacement tach sensor?

1 Upvotes

Trying to find a replacement sensor for the counter. The speed one is working but the direction one is bust. Anyone know anywhere that sells something that will work in 2026?

Thanks
Jimmy


r/ReelToReel • • 2d ago

A Friends Scully 255s.....

Post image
140 Upvotes

The collectiin of tapes is ming boggling!


r/ReelToReel • • 1d ago

tascam 38 mechanical noise

9 Upvotes

whats an acceptable level of noise from the capstan and flywheel? ive had mine in bits trying to chase down the culprit of this noise.

or is it something need to accept?

oiled the flywheel and checked the bearings on both ends.

i would so much like to have this noise gone! thankful for tips


r/ReelToReel • • 3d ago

ReVox B77 Mk II HS CCIR Sync

Post image
44 Upvotes

Ready for a new home


r/ReelToReel • • 2d ago

Input and output levels don't match

5 Upvotes

I am using a Teac A3340s 4-track

I have noticed that my input levels at 12 o'clock when monitoring source audio are right (at zero, occasionally bleeding into red) but I have to crank playback output levels almost all the way monitoring tape to get a comparable signal, and it seems I have to do that more on track 1 and on the others.

Is this the symptom of something needing to be replaced, or just how these old units are?

ETA: I'm talking about the VU meters on the tape machine itself, but they seem to reflect the diminished output level I'm getting from the unit.


r/ReelToReel • • 3d ago

Technical Stuck tension button on sansui sd 7000

Post image
5 Upvotes

I have an absolute magic sd 7000 that sound great and everything seems to work except: the tension button is stuck at half mil and reverse sounds "thinner" than foreword. How do I get this button to pop out (pic is not mine, in mine the button is pressed in) and does this have any impact on reverse play or do i have something else there that I need to chase?


r/ReelToReel • • 4d ago

My tape setup as a 17 y/o highschool senior

159 Upvotes

I’ve made some posts on this subreddit a few times fixing my dads tape machine, I had been looking for my own for a while but had no luck finding one in my budget (I work part time at McDonald’s). Until I found this Sony tc-280 for $60 on eBay, I it had power but it wouldn’t move forward, so I took it apart and I found that the arm that pushes the forward power transfer wheel was seized in the middle, I took it apart and freed it and re greased it, got it put back together and now I can say I am the proud owner of my first working tape machine at 17


r/ReelToReel • • 4d ago

An evening with the designer. 🎙️On October 29, Octave founder Andreas Hofmann travelled from Germany to LMC Scottsdale to present his life’s work in person. In room: the Jubilee Preamp SE and Jubilee Mono SE monoblocks, playing tape on the TP-1000.

Post image
15 Upvotes

r/ReelToReel • • 5d ago

Help - Equipment Sony TC-377 / My First Reel to Reel

62 Upvotes

I have never owned or touched a Reel to Reel before and this Sony TC-377 was given to me to tinker with. I took it apart and it looks like it was sitting for a while, the drive belt has a flat spot in it. Does it look/sound like thats all that's wrong with it? It seems like its struggling to pull the tape through


r/ReelToReel • • 5d ago

Show and Tell Charity shop purchases

Thumbnail
gallery
14 Upvotes

Just picked up these at a local charity shop. Never see R2R tapes these days and whilst not to my taste they deserved saving..

They also had this cover , but unfortunately no tape or box...


r/ReelToReel • • 5d ago

I've been tasked with getting a Grundig TK146 working, but it won't play...

Thumbnail
gallery
6 Upvotes

I've freed off everything that should move but was sticky or stuck, replaced the belt for the counter and the right hand spindle, and it will fast forward and rewind but it won't play. I'm assuming the left hand spindle should move over to the drive wheel when in Play but it doesn't move far enough to engage it. It does engage the drive when it's ff (or rew, whichever it is).

I've found a small piece of black plastic in the case that has broken off something but I can't see where it should go.

Any ideas?


r/ReelToReel • • 5d ago

Help - Equipment Deck or tape problem?

2 Upvotes

Hello. Just recently bought some new tapes which are SONY ULH-7-550-BL they seemed like they were in good codition so I took them home. Today I started recording with it on my recently serviced AKAI GX4000D which yesterday I had given a good clean on the heads and on the tape path and for 2/3 of side 1 everything was alright and suddenly while recording I could hear screeching from the deck or the tape which I still dont know because this screeching was also picked up by the heads and got recorded. I had times where I could hear a faint screech meanwhile the tape was on and it also got recorded but wasnt that so catastrophical like the screech is around 50 seconds (and this time It wasnt emitting any screeching audible from the deck I could only hear this on the tape this time) and after that it cut out, recording nearly nothing. Im a bit lost. I have had times hearing this screeching with different tapes but it was never this penetrating nor made it on to a recording.


r/ReelToReel • • 5d ago

For Sale Roberts 1725 8L

Thumbnail
gallery
13 Upvotes

Can someone share some info on this unit? Value? I tested the R2R function and it works. Seems to be in Excellent to Mint Condition. It also has 12 Reels with Various Recordings. Location is near Madison Wi.


r/ReelToReel • • 6d ago

Show and Tell A couple more of my reel to reels

Post image
168 Upvotes

Recently posted another Scully 280B upstairs. That 280-2"was from 1966!


r/ReelToReel • • 6d ago

Technical ITC 850 bottom machine

Post image
37 Upvotes

I have two of these play only machines. No books avail anywhere! I have the record amps too...but no interconnect cables. They were gifted!!! One has a broken brake band! Anyone have ANY info, would be appreciated.


r/ReelToReel • • 6d ago

Show and Tell My small reel-to-reel audio tape collection

Post image
40 Upvotes

For the last few years, I've been picking up reel-to-reel tapes whenever I'm out thrifting for other physical media, and this is what I've managed to find in that time. It's roughly 50/50 between pre-recorded and tapes that others have put things on. Nothing has cost more than $5 (pretty much the Dylan, Sly, Steve Miller and CCR tapes, which cost $5 each).

The sad part is that I don't actually own a reel-to-reel player - I've never seen one of those in the wild, nor do I really have the skill to restore one even if I found one in a thrift store somewhere. Someday I'll just buy a refurbished one from somebody and finally give these a try.


r/ReelToReel • • 5d ago

What’s an affordable must have prerecorded tapes in your opinion?

1 Upvotes

Getting back into tapes and looking to expand my collection of pre-recorded tapes. Any suggestions for under albums that go for under $50?


r/ReelToReel • • 6d ago

Call RCA Factory Service! RCA jingle I found and transferred to tape.

12 Upvotes

r/ReelToReel • • 6d ago

philips N4504 R2R capstan motor slows down and stops

3 Upvotes

hello, if anyone can help, i have a philips n4504 machine, second hand but in working order except some cosmetical issues (missing button...). the problem is, the capstan motor is making a grinding noise that it didn't make earlier (not too loud, but it's not quiet either) and after trying to play a tape it goes to a stop, i can spin it back up by stopping playback or giving it a push, but overall it's not usable right now.

i didn't yet try opening the machine. is there something to lubricate (i have a bottle of fine machine oil, or wd40 too), or something happened to the motor itself?

PS - the right tape tensioner (on the pick up reel) is quite loose and moves inward when the tape is under tension. the left tape tensioner moves left and right as it should, but the right one is also moving inward (like, inclined to inside). is that something it should do, if not is it fixable?

thanks


r/ReelToReel • • 6d ago

Help - Equipment Where can I find belts for the National RQ-194S and RQ-153S?

1 Upvotes