r/RepTimeQC • • 3h ago

VF Tudor Black Bay 54 from InTime. First QC, thanks in advance!

Thumbnail
gallery
8 Upvotes
  1. Dealer name: InTime Watch
  2. Factory name:

ZF (mistake in title)

  1. Model name (& version number): Black Bay 54
  2. Price Paid: $335
  3. Album Links:
  4. Index alignment: looks acceptable given the usual alignment issues with this rep. 3 gap is a bit larger than the others.
  5. Dial Printing: No issues
  6. Date Wheel alignment/printing: n/a
  7. Hand Alignment: no issues
  8. Bezel: no issues. Pip looks centered
  9. Solid End Links (SELs): no issues
  10. Timegrapher numbers: no issues
  11. Anything else you notice: black markings on the bracelet under the 6. They’re shown in every photo so I think I should ask about these

Overall this watch seems acceptable given the typical qc issues with the ZF black bay 54. Interested in hearing if anyone thinks otherwise or sees something I don’t. Thanks!


r/RepTimeQC • • 1h ago

[QC] VSF Submariner 126610LN (VS3235) - Ethan

Thumbnail
gallery
3 Upvotes
  1. Dealer name: Ethan Watches
  2. Factory name: VSF
  3. Model name (& version number): Rolex Submariner 41mm 126610LN (Dandong VS3235 movement, 6W serial / E7Y clasp)
  4. Price Paid: $465 USD (including shipping)
  5. Album Links: https://www.szwego.com/weshop/goods/_diBqfB_6K0Fni6Viqy3qjRnYcVlHlv_RP68U2bQ/_daMqf1jEZ8WgP9meCNU2wz_yCpAxX65qTrYLmPg
  6. Index alignment: Looks very clean — 12 o'clock triangle points straight down toward the coronet, and both the 6 and 9 o'clock rectangular markers are straight and well-aligned with the minute track.
  7. Dial Printing: Sharp and crisp across ROLEX, SUBMARINER, and the tiny 6 o'clock coronet between SWISS MADE.
  8. Date Wheel alignment/printing: Centered nicely inside the window without touching the edges; cyclops sits straight with clear "black hole" AR coating.
  9. Hand Alignment: Looks properly aligned and clean.
  10. Bezel: 12 o'clock triangle lines up well with the dial marker; lume pip sits dead-center inside the triangle.
  11. Solid End Links (SELs): Tight fit on all four corners with no noticeable gaps.
  12. Timegrapher numbers: +2 s/d, 278° amplitude, 0.1 ms beat error (52.0° lift angle).
  13. Anything else you notice: Weight is 158.6g (with stickers) and rehaut alignment looks solid. let me know if I missed anything!

r/RepTimeQC • • 11h ago

VSF 126710 BLRO “Pepsi” GMT-Master II (V3) QC--thank you for all your help!!!:)

Thumbnail
gallery
14 Upvotes
  1. Dealer name: Andiot
  2. ⁠Factory name: VSF 
  3. ⁠Model name (& version number): 126710 BLRO "Pepsi" V3 (not fake free sprung) on Jubilee
  4. ⁠Price Paid: $606
  5. ⁠Album Links: https://imgur.com/a/rrntLtC (go hear for video and to hear click when bezel rotates)
  6. ⁠Index alignment: Hard for me to align perfectly due to angle/skew from picture, but they generally look fine; I don’t love how the bezel doesn’t seem to be “clicked in” at 12 o’clock in video and in pictures—looks like the “standard” setting is in between clicks which will annoy me a lot. 12 o'clock marker MIGHT be rotated a bit.
  7. ⁠Dial Printing: Looks good
  8. ⁠Date Wheel alignment/printing: Date wheel seems a little high
  9. ⁠Hand Alignment: Looks good (see video)
  10. ⁠Bezel: Looks good, but why doesn't it click when turned? Barely audible "mushy" sound
  11. ⁠Solid End Links (SELs): Looks great
  12. ⁠Timegrapher numbers: Within range
  13. ⁠Anything else you notice: Not perfect; has some dust (hopefully outside the case); worried about clasp code A9A compared to F6U; also concerned the bezel doesn’t seem to rest aligned with 12 o’clock and doesn't click clearly when rotated; some scuffs on clasp and watch but I think those are just on plastic.... all said, GL to me?

r/RepTimeQC • • 6h ago

QC Rich Sub Date 126610LN The One Watches Steve

Thumbnail
gallery
4 Upvotes
  1. Dealer name: TheOneWatches - Steve
  2. Factory name: Rich Factory
  3. Model: Submariner 126610LN 41mm JH3235
  4. Price Paid: $538 + shipping
  5. Album Links: https://mega.nz/folder/LBpTBQwZ#TULkidtVOL6x-eGoALWvaA
  6. Index alignment: This is where I need some help. Using alignment tool it looks like either the 12 is rotated or the bezel pip is? Honestly I think its just the angle the watch is being held. Would love input.
  7. Dial Printing: fine
  8. Date Wheel alignment/printing: fine
  9. Hand Alignment: fine
  10. Bezel: fine
  11. Solid End Links (SELs): in the angled wrist photo you can appreciate the SEL-lug height difference, I've seen conflicting things on people's tolerance of this. I think its fine.
  12. Timegrapher numbers: +3s/d, 279, 0.0ms, 52 degree,
  13. Anything else you notice: Assuming index alignement is good, I think I'm good to go. 2nd QC ever so appreciate the help.

r/RepTimeQC • • 5h ago

[QC] VSF Datejust 41 126334 Mint Green from Steve (TheOneWatches)

Thumbnail
gallery
3 Upvotes
  • Dealer name: Steve (TheOneWatches)
  • Factory name: VSF (v3 according to steve but on their site says v2)
  • Model name (& version number): Datejust 41mm 126334 Mint Green Fluted Bezel on Jubilee
  • Price Paid: $560
  • Album Links: https://imgur.com/a/4a9WzQ2

Index alignment: Hard for me to align perfectly due to camera angle/skew, but they generally look fine expect maybe the 6th?.
Dial Printing: Looks good.
Date Wheel alignment/printing: Date wheel seems OK to my eyes, but I have trouble judging fine details like this.
Hand Alignment: Looks good (see video in album).
Bezel: Looks good, besides the standard limitations of this kind of fluted bezel by this factory.
Solid End Links (SELs): Looks good.
Timegrapher numbers: +6s/d, 276° amplitude, 0.0ms error. (A bit fast, but well within acceptable limits).

Anything else you notice:
I see some smudges around the serial number "6" on the rehaut (visible in the picture with the crown logo and "Swiss Made"). Can anyone confirm if this looks like dust on the outside plastic/crystal or a flaw on the actual metal? Also, the clasp code is ORV (just double-checking this is normal for VSF my first rep honestly been a lurker mostly).

GL or RL?


r/RepTimeQC • • 5h ago

VF Yacht-Master Titanium Necoclock- Thanks in advance

Thumbnail
gallery
3 Upvotes
  1. Dealer name: Necoclock
  2. Factory name: VF
  3. Model name (& version number): Yacht-Master 226627 42mm TI/TI Black/Dot VF DD3235
  4. Price Paid: $558
  5. Album Links: https://mega.nz/folder/n1olRKhI#iPT5dhkMXsvUdm3TCDe7SQ
  6. Index alignment: I think i see slight CW tilt on 9 o'clock
  7. Dial Printing: Appears good on zoom
  8. Date Wheel alignment/printing: Looks good to my untrained eye
  9. Hand Alignment: looks good initially
  10. Bezel: Looks good
  11. Solid End Links (SELs): I dont see any gaps
  12. Timegrapher numbers: +10 s/d , 292degrees, 0,2ms
  13. Anything else you notice: Nothing initially

r/RepTimeQC • • 5h ago

QC - VSF AP Royal Oak 15510 V2 Green

Thumbnail
gallery
2 Upvotes

QC - VSF AP Royal Oak 15510 V2 Green

  1. ⁠Dealer name: Non-TD
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): AP Royal Oak 15510 V2 Green
  4. ⁠Price Paid: 2900 CNY, shipping within China
  5. ⁠Album Links: https://imgur.com/a/TarLId4
  6. ⁠Index alignment: Looks fine. Not so sure about the AP logo, is it good enough?
  7. ⁠Dial Printing: Best 15510 dial in my opinion.
  8. ⁠Date Wheel alignment/printing: Centered well.
  9. ⁠Hand Alignment: Good as well.
  10. ⁠Bezel: Screws look good, I don't see any issue.
  11. ⁠Solid End Links (SEL): Integrated bracelet.
  12. ⁠Timegrapher numbers: +3 s/d, 243°, 0.2ms
  13. ⁠Anything else you notice: Everything looks solid, but I'm a bit worried about the AP logo alignment. Also the gap at the clasp (around square AP logo) worries me a bit, but it seems to be normal. Timegrapher number seem to be still alright.

What do you guys think?


r/RepTimeQC • • 10h ago

Daytona 116509 40mm SS/SS Grey/Blk VSF V3 DD4130 Super Clone (Gain Weight)

Thumbnail
gallery
5 Upvotes
  • Dealer name: Steve, theonewatches
  • ⁠Factory name: VSF 
  • ⁠Model name (& version number): Daytona 116509 40mm SS/SS Grey/Blk VSF V3 DD4130 Super Clone (Gain Weight)
  • ⁠Price Paid: $648
  • ⁠Album Links: https://mega.nz/folder/XVQhkZiQ#e--62gzSwrXxPVFhL6vHKQ
  • ⁠Index alignment: Maybe it is the alignment pictures that screws it up because the original photo of the watch is a bit tilted? But 11 o'clock looks closer to 12, 3 looks bigger than 9.
  • ⁠Dial Printing: Looks good
  • ⁠Date Wheel alignment/printing: -
  • ⁠Hand Alignment: Looks good
  • ⁠Bezel: Looks good
  • ⁠Solid End Links (SELs): Looks great
  • ⁠Timegrapher numbers: Within range
  • ⁠Anything else you notice: Only thing that I am abit skeptic about is the 11 o'clock, it feels rotated.

r/RepTimeQC • • 5h ago

VSF Tudor Pelagos 42mm Titanium (Ref. 25600TN)

Thumbnail
gallery
2 Upvotes

Dealer name: DDGTOP

⁠Factory name: VSF

⁠Model name (& version number): Tudor Pelagos 42mm Titanium (Ref. 25600TN)

⁠Price Paid: $265 + Shipping and Insurance

⁠Album Links: Full QC photos attached, including timegrapher

⁠Index alignment: This one looks good. Maybe the 9 is slightly off

⁠Dial Printing: It looks clear and crisp.

⁠Date Wheel alignment/printing: looks centered to me.

⁠Hand Alignment: looks good

⁠Bezel: looks good

⁠Solid End Links (SELs): Both look seated in the available shots, with no obvious gaps.

⁠Timegrapher numbers:

Rate: +6 s/day

Amplitude: 335°

Beat error: 0 ms

Beat Rate (28,800 vph)

These readings appear excellent.

⁠Anything else you notice: This one looks really go to me, but maybe I’m missing something. A second set of eyes would make me more comfortable.


r/RepTimeQC • • 12h ago

QC VSF V2 Rolex Daydate 40 228239 Black Dia

Thumbnail
gallery
8 Upvotes

Good morning
Dealer name: TheOneWatches (Steve)
Factory name: VSF V2
Model name: Rolex Day-Date 40 228239, Black Baguette Dial, 181.8g
Price paid: 728$ + ship
Album links: https://mega.nz/folder/eUggXIxZ#B1VYXFNG7URWy6fAAZSpxA
Index alignment: Looks good overall. No obviously crooked markers, but I would appreciate a closer look at the baguette markers, especially at 6 o’clock.
Dial printing: Looks clean overall. I’m not entirely sure about the spacing and alignment compared to Gen.
Day/date wheel alignment/printing: Looks acceptable from the available photos, but I would appreciate a second opinion on the centering.
Hand alignment: Looks good to me. No obvious issues.
Bezel: Looks good overall, with no obvious defects.
Solid End Links (SELs): No noticeable gaps or obvious fitment issues.
Timegrapher numbers: +1 s/day, 272–274° amplitude, 0.0 ms beat error.
Anything else you notice: Overall, the watch looks pretty solid to me. The weight is 181.8g, which seems consistent with the VSF V2 specifications.
I’m particularly interested in the dial printing, baguette marker alignment, Rolex crown at 12 o’clock, rehaut engraving, and overall finishing compared to Gen.
Would you GL or RL this watch? Are there any flaws I might have missed?
Thanks in advance for your feedback!


r/RepTimeQC • • 3h ago

VSF Datejust 41 126300 JTime

Thumbnail
gallery
1 Upvotes
  1. Dealer: JTime 
  2. Factory: VSF 
  3. Model: Datejust 41mm 126300 mint green fluted-motif dial, smooth bezel on jubilee
  4. Price: $488 + shipping
  5. Album Links: Uploaded to post
  6. Index alignment: Look correctly aligned to me. Does the 6 look off in terms of the fluted dial pattern?
  7. Dial Printing: Looks fine.
  8. Date Wheel alignment/printing: The 3 looks to sit slightly high. the ’5’ in the 25 looks slightly higher than the 2 - but acceptable to me unless im told otherwise:)
  9. Hand Alignment: Looks good.
  10. Bezel: Looks fine from what I can tell, went for the smooth so it’s not a different material (since the bezelled ons is supposed to be WG)
  11. Solid End Links (SELs): Can’t see any gaps.
  12. Timegrapher numbers: 0 s/d, 288° amplitude, 0.0 ms beat error
  13. Comment: I wasn’t gonna go for a fluted dial initially but it was the only VSF available, so I don’t really know how good they are for a rep. Any help / advice appreciated. Does the 6 look not right in the middle of the fluted dial pattern?

r/RepTimeQC • • 4h ago

QC Panthere 22mm BVF

Thumbnail
gallery
1 Upvotes

Bought this watch for my wife. Second rep in the family after my Datejust.

Dealer name: FicoTime

Factory name: BVF

Model name (& version number): Cartier PANTHERE 22mm White Dial

Price Paid: 249 USD including shipping

Album Links: https://mega.nz/folder/K5ZlhaJa#0_EqyMa5Mq_pnlnDFKcYOg

Index alignment: I have 2 open point on that… the “Cartier” on the number X, seems to be crooked.. it’s true that I zoomed it, but it seems very crooked. Second one, the “Swiss made” under the number XI seems to be tilted..

Dial Printing: Looks good, any comment?

Date Wheel alignment/printing: N/A

Hand Alignment: I think is ok

Bezel: it looks very solid to me, no issues identified

Solid End Links (SELs): N/A

Timegrapher numbers: quartz

Anything else you notice: n/a

I know it’s a print dial and that at the wrist, so small, probably no one can notice, but I do… thought? Should I RL?


r/RepTimeQC • • 4h ago

FIrst QC AP 67650

Thumbnail
gallery
1 Upvotes

Hi All, I would love to hear your views on this watch. Thank you for assisting me!

1.     Dealer name: ChazingTime

2.     Factory: ZF

3.     Model name: AP 67650ST 33mm Quartz Model

4.     Price: $280

5.     Album:

6.     Index alignment: I think that 3 is an issue, and 7 is slightly off too? please let me know what you guys think about this!

7.     Dial print: I couldn’t find anything off.

8.     Date wheel alignment: looks ok to me

9.     Hand alignment: looks ok to me too

10.  Bezel:  looks ok to me too

11.  Solid end links: Not Applicable.

12.  Timegrapher: Quartz movement, so therefore it’s not needed.

13.  Anything else: In general, i am kinda concerned about the 3 and 7. one more thing about the lume, is it missing 2 dots near the bezel end for 1 and 2?


r/RepTimeQC • • 13h ago

[QC] VSF Rolex Yacht-Master 40 Blue Dial - OraWatch - QC Help Appreciated

Thumbnail
gallery
5 Upvotes

Hi everyone,
Just received my QC photos for the VSF Yacht-Master 40 Blue Dial from OraWatch. Would appreciate some experienced eyes before I GL this one.
Dealer name: OraWatch
Factory name: VSF
Model name (& version number): Rolex Yacht-Master 40 Blue Dial (126622)
Price paid: $500 USD
Album Links: Photos uploaded directly to this post.
Index alignment: Looks good overall. The hour markers appear straight and evenly positioned. Would appreciate a second opinion.
Dial Printing: Looks clean and crisp to me. The blue sunburst finish looks consistent. Any visible printing imperfections or dust?
Date Wheel alignment/printing: The date 9 looks slightly off-centre to me in some photos. Not sure whether this is due to the camera angle or an actual alignment issue.

The shape of the 9 doesn’t appear perfectly uniform, and it also looks slightly off-centre within the date window.
I’m not sure whether this is due to the Cyclops distortion, camera angle, or an actual printing issue.
I’ve requested additional close-up photos of dates 8, 9 and 10.

Hand Alignment: Looks fine from the photos, although I haven’t seen a proper alignment test.
Bezel: The triangle at 12 appears aligned, and the engravings look reasonably clean. Would appreciate feedback on the bezel finishing and alignment.
Solid End Links (SELs): No obvious gaps from what I can see. Would appreciate confirmation.
Timegrapher numbers:

Rate: +3 s/day
Amplitude: 264°
Beat Error: 0.3 ms
Lift Angle: 52°
Numbers look good to me.

Anything else you notice: The watch weighs 143.72 g. Rehaut serial appears to be 6W09E311. Would appreciate feedback on the rehaut engraving, crown, dial cleanliness, and overall finishing.
Overall, I’m leaning towards GL, but the date alignment is my main concern.
Would appreciate any feedback from members familiar with the VSF Yacht-Master, especially if you notice anything I’ve missed.
Thanks in advance!


r/RepTimeQC • • 5h ago

CBD DD36 YG “Tony Soprano”

Thumbnail
gallery
1 Upvotes
  1. ⁠Dealer name: Quick Time
  2. ⁠Factory name: CBD
  3. ⁠Model name (& version number): Daydate 36mm
  4. ⁠Price Paid: $668
  5. ⁠Album Links: See photos in post
  6. ⁠Index alignment: Acceptable to me
  7. ⁠Dial Printing: Crisp and clear
  8. ⁠Date Wheel alignment/printing: DAY appears to be biased to the right. DATE appears to be biased to the left.
  9. ⁠Hand Alignment: Acceptable
  10. ⁠Bezel: Looks pretty sharp
  11. ⁠Solid End Links (SELs): No gaps
  12. ⁠Timegrapher numbers: Acceptable
  13. ⁠Anything else you notice: Cyclops appears to be rotated counterclockwise and biased to the right

r/RepTimeQC • • 18h ago

[QC] VSF V3 Daytona 126506 Ice Blue Platona | DD4131v2 | GL or RL?

Thumbnail
gallery
8 Upvotes

Dealer name: TheOneWatches (Steve)
Factory name: VSF V3
Model name: Daytona 126506 Ice Blue, DD4131v2, Weighted 176g
Price paid: $858
Album links: Photos attached
Index alignment: Looks good. No obvious crooked markers.
Dial printing: Looks clean and centered.
Date wheel alignment/printing: N/A
Hand alignment: Looks good. Chronograph hands appear centered.
Bezel: Looks aligned, no obvious issues.
Solid End Links (SELs): No noticeable gaps.
Timegrapher numbers: −4 s/d, 271° amplitude, 0.0 ms beat error.
Anything else you notice: Overall looks solid to me. Would you GL or RL? Appreciate the feedback!


r/RepTimeQC • • 21h ago

BVF Cartier Panthère 22mm SS - First QC round

Thumbnail
gallery
10 Upvotes
  1. Dealer name: Andiot
  2. Factory name: BVF
  3. Model name (& version number): Cartier Panthere 22mm SS
  4. Price Paid: 175$ + shipping
  5. Album Links: https://andiotwatches.x.yupoo.com/albums/263811905?uid=1
  6. Index alignment: Need your help here. It's very difficult for me to spot any issues. Should I use a QC alignment tool on this one?
  7. Dial Printing: Looks okay to me. However I would appreciate your input.
  8. Date Wheel alignment/printing: N/A
  9. Hand Alignment: Looks good to me I think
  10. Bezel: N/A
  11. Solid End Links (SELs): N/A
  12. Timegrapher numbers: N/A - Quartz movement
  13. Anything else you notice: I don't really know what to see on this kind of watches. Any help would be appreciated :)

Thank you guys


r/RepTimeQC • • 15h ago

Black Bay Fifty Eight 39mm SS/SS Blue Dial on Blue Bezel ZF A2824 | From Steve Theonewatches

Thumbnail
gallery
3 Upvotes

r/RepTimeQC • • 1d ago

QC RICH GMT Master II Batgirl (free sprung)

Thumbnail
gallery
21 Upvotes

G'day all. First Qc and first rep. After spending a heap of time here I decided to go with the rich batgirl as my first rep. Chose steve as I've been impressed with the quality of other QC posts from him.

  1. Dealer name: theonewateches (steve)
  2. Factory name: rich
  3. Model name (& version number): GMT Master II Batgirl Jub JH3285 free sprung
  4. Price Paid: $750 shipped
  5. Album Links: https://mega.nz/folder/WFYDDDYJ#O9h0ULyhN5Tp8AFnvWCzpA
  6. Index alignment: Looks aligned for each hour. The triangle at 12 maybe slightly not centred? The 4, 5, 7 and 8 marker look a little messy? the black circle isnt perfect on them.
  7. Dial Printing: looks good
  8. Date Wheel alignment/printing: i think it looks good and printing is aligned
  9. Hand Alignment: Looks fine.
  10. Bezel: no issues
  11. Solid End Links (SELs): cant see any major gaps
  12. Timegrapher numbers: 0sd 282 degrees 0.0ms error
  13. Anything else you notice: Ive never had a jubilee bracelet, is it meant to be see through as seen in the images.

r/RepTimeQC • • 1d ago

QC] VSF Daytona 126500LN 40mm SS/SS Black Dial DD4131v2 – Steve / TheOneWatches

Thumbnail
gallery
10 Upvotes

Hi, all. This is my first rep purchase and first QC. I’ve included my (beginner) assessment below. I would really appreciate any additional feedback from the experts in this community before giving Steve the green light. Would you GL this?

Dealer name: Steve / TheOneWatches

Factory name: VSF

Model name (& version number): Rolex Daytona 126500LN 40mm SS/SS Black Dial, DD4131v2

Price Paid: USD 828 (+ $35 shipping). I also have a GMT Batgirl in the works that isn’t ready yet, so shipping was $70 total for both watches.

Album Links: Photos include on post.

Index alignment: The 12, 6, 3, indexes all appear properly aligned to me. There is a slight rotation with 9, but I would live since it’s tough to see from the wrist.

Dial Printing: Looks good to me.

Date Wheel alignment/printing: N/A

Hand Alignment: The central chronograph seconds hand appears to reset correctly to 12 o’clock at approximately 41 seconds in the 52-second video they sent. I don’t notice any obvious hand alignment issues.

Bezel: Seems good to me. I notice the classic difference in 110 marking relative to the genuine Daytona, but I could live with it.

Solid End Links (SELs): I don’t see any obvious large gaps or uneven figment.

Timegrapher numbers: -1/-2 s/d, 277/278° amplitude, 0.0 ms beat error. These readings look excellent to me.

Anything else you notice: Weight is 144.8 g. This is my first QC, and in full transparency, I used two AI checks in addition to my own eyes to help evaluate the watch. Both leaned GL, and I agree with that. One other concern: I did ask for a video of the movement without the case back on, but Steve wouldn’t send it due to the factory sticker having to be removed on the edge of the case back and therefore voiding return. Is that a large enough concern to not verify DD4131v2; or pretty common?


r/RepTimeQC • • 23h ago

[QC] - First time - Rolex 126334 fluted bezel, blue with moissanite markers

Thumbnail
gallery
5 Upvotes

Here is my first rep and first QC. I'd appreciate a second or third set of eyes. Thanks for taking a look!

Dealer name: Steve @ TheOne

  1. Factory name: Clean Factory
  2. Datejust 126334 41mm Jub SS/SS Blue/Mois Clean SH3235
  3. Price Paid: 533(including expedited FedEx shipping)
  4. Album Links: https://mega.nz/folder/6Y4EiCyZ#GvWX8INfcrgEjzyQAfNf1w
  5. Index alignment: Alignment looks proper, and it looks clean, but I am an amateur
  6. Dial Printing: Dial looks nice, the printing is clear n clean.
  7. Date Wheel alignment/printing: I think it looks good on the cyclops, and aligned.
  8. Hand Alignment: looks proper and aligned?
  9. Bezel: looks pretty clean, no rough ridges or scuffs but again, I’m amateur
  10. Solid End Links (SELs): Nothing sticks out to me, everything looks right.
  11. Timegrapher numbers: +4 s/d, 256° amplitude, 0.1 ms beat error.
  12. Anything else you notice: Not 100% confident on doing this QC on my own. Any help with this would be greatly appreciated!

r/RepTimeQC • • 1d ago

Andiot VSF 126610LV Starbucks

Thumbnail
gallery
5 Upvotes

Dealer name: Andiot

Factory name: VSF

Model name/version: Rolex Submariner Date 126610LV “Starbucks”

Price paid: $460 + $30 Shipping

Album link: https://andiotwatches.x.yupoo.com/albums/263810935?uid=1

Index alignment: Looks well aligned. The 12, 6 and 9 markers appear straight, I don't see any tilts.

Dial printing: Looks sharp, just some dust

Date-wheel alignment/printing: The “13” appears properly centred. I am not too sure about the magnification, so if anyone sees anything, please do let me know.

Hand alignment: Good, as usual, as seen in the video.

Bezel: The triangle looks straight, and all the numbers are good.

Solid end links: Looks good, I don't see any gaps.

Timegrapher numbers: −2 s/day, 263° amplitude and 0.1 ms beat error at a 52° lift angle.

Anything else: Lume is great aswell and honestly, I do not see much wrong with this QC.


r/RepTimeQC • • 20h ago

[QC] First Rep Purchase: Rolex Day Date

Thumbnail
gallery
2 Upvotes
  1. Dealer: Ethan Watch
  2. Factory: RC Factory
  3. Model Name: RC 40mm Platinum Gradient Blue Roman Dial Calendar Three-Bun 89M79327 AE1628
  4. Price Paid: $720.00USD
  5. Album Links: https://www.wsxcme.com/weshop/goods/_diBqfB_6K0Fni6Viqy3qjRnYcVlHlv_RP68U2bQ/_dhtqfd7Mtcd750jXbnGjIEBhPa85y05PXBg2_vA
  6. Index Alignment: No alignment issues noted. I used an alignment template but couldn't figure out how to save the image. The 12 and 6 look well aligned vertically, as does the coronet. The 3 and 9 look to be properly aligned horizontally as well.
  7. Dial Printing: Dial printing appears sharp, well aligned, and properly spaced.
  8. Date Wheel Alignment and Printing: Day and date appear properly aligned. Day is evenly spaced in day window. Date also appears evenly spaced left to right and top to bottom in date window. Cyclops looks centered over date window also. Day and date printing appear sharp and without bleeding.
  9. Hand Alignment: No obvious issues stood out with alignment template. Hands appear properly aligned to me.
  10. Bezel: Bezel appears sharp and well finished. No obvious marks or scratches.
  11. SEL: No discernable gaps to my eyes.
  12. Time Grapher: Rate - (-1 s/d), Amplitude - 238, Beat Error - 0.2ms
  13. This is my first QC ever. The watch looks very nice to me. Please review my comments and let me know if I am wrong about anything. I appreciate the RepTime community very much. I have learned a lot. Thank you to everyone that took time to publish guidelines and look at these QC posts. Looking forward to hearing from those more experienced than me.

r/RepTimeQC • • 1d ago

[QC] PPF VC Historiques 222

Thumbnail
gallery
5 Upvotes
  1. Dealer name: Trusty Time 
  2. Factory name: PPF
  3. Model name (& version number): VC Historiques 222 v2
  4. Price Paid: 498 USD
  5. Album Links: \[[https://imgur.com/a/1fBvTqX\](https://imgur.com/a/1fBvTqX)](https://imgur.com/a/1fBvTqX](https://imgur.com/a/1fBvTqX))
  6. Index alignment: I think no major issues.
  7. Dial Printing: I think no major issues.
  8. Date Wheel alignment/printing: As mentioned above, I think the font is incorrect.
  9. Hand Alignment: Looks good.
  10. Bezel: I did not notice anything
  11. Solid End Links (SELs): It looks a little messy, but I suppose that's normal given the construction.
  12. Timegrapher numbers: -0 s/d, 287°, 0.1ms 28800, 52.0° lift
  13. Anything else you notice: I just received QC photos of my PPF Historiques 222, and I think the date font might be incorrect. The number 3 isn't supposed to look like this, right? I read somewhere that the date font got worse with V2. How does it look on your watches?