r/RepTimeServices • • 1h ago

Advice Automatic Watches not staying wound

2 Upvotes

Three out of four "Super Clone" automatic watches will not stay wound except manually.

Not on my wrist or in the winder box.

Rolex, AP, PP, and Hublot. All from different TDs and different factories.

Is this a common problem or am I just unlucky. Is there a way to fix them?


r/RepTimeServices • • 1h ago

Services DD3285 service.

Thumbnail instagram.com
1 Upvotes

This Bruce Wayne had a malfunction when setting the date. The wheel would get stuck after midnight and only fully switch at around 2:30.


r/RepTimeServices • • 1h ago

Question Crown replacement

1 Upvotes

This is my first post in this community. I’ve been in the rep community for a few months and have bought and sold quite a few and have finally settled on the ones I wanna keep and have serviced, chamfered, waterproofed, etc.

Currently I am in need of someone who can replace a crown and crown tube on my Clean Starbucks. I think it may be cross threaded. Can someone point me in the right direction on who can fix this for me?

Any suggestions or advice would be greatly appreciated! Have a great Sunday fellas!


r/RepTimeServices • • 5h ago

Question Anyone have contacts or websites I could order replica Rolex replacement parts?

1 Upvotes

I’m working on fixing someone’s VSF sea dweller 43mm and a C+ James Cameron deep sea dweller.

Both have issues with Bezel components, so needing rotational ring, lock ring, gaskets, etc.

Does anyone have a contact they can get Chinese replacement parts? Thanks!


r/RepTimeServices • • 7h ago

Request Looking for a skilled watchmaker – DD4130 skeletonization and manual-winding conversion (Artisans de Genève inspired)

Post image
1 Upvotes

Ciao a tutti,

Sto cercando un orologiaio esperto o uno specialista nella personalizzazione di movimenti in grado di modificare un movimento cronografico DD4130.

Idealmente, vorrei ottenere le seguenti modifiche:

Conversione da carica automatica a carica manuale.

Rimozione completa del meccanismo di carica automatica.

Modifica o sostituzione del bariletto e della molla motrice, se necessario.

Scheletratura dei ponti e della platina.

Ponte del bilanciere personalizzato.

Finiture sabbiate, spazzolate e lucidate di alta qualità.

Mantenimento della piena funzionalità del cronografo e dell'affidabilità meccanica.

L'obiettivo è ottenere un risultato estetico e meccanico il più possibile simile al movimento mostrato nella foto allegata, utilizzando un calibro DD4130 come base.

Sono aperto anche a soluzioni tecniche alternative e modifiche parziali qualora una conversione completa risultasse troppo complessa.

Qualcuno qui possiede le competenze necessarie o conosce un orologiaio o un'officina indipendente in grado di realizzare un progetto del genere?

Sono disposto a commissionare e pagare il lavoro. Consigli, contatti, esempi precedenti di modifiche simili e preventivi di spesa sarebbero molto apprezzati.

Grazie!


r/RepTimeServices • • 9h ago

Question Slate Dial / VSF Parts Seller

Post image
1 Upvotes

Hello Community,

I am searching for VSF Part. Especially dials. At the Moment I am looking for a Grey/slate dial (Like in the Picture).

I am trying to get into Building and repairing watches and Look for ways to purchase Parts. I am all grateful for any clues in that direction. I am in the EU - so if there is a Option to purchase in EU - that would be Great!

Thanks in Advance


r/RepTimeServices • • 1d ago

Guides VR3285 Assembly

21 Upvotes

Piggybacking on my disassembly video, I finished editing the assembly video of the VR3285. I did most of the lubrication with my stereo microscope that didn’t have a way to record at the time. I also installed the balance jewels and escape cap jewel with my stereo microscope, but the rest of the assembly was all recorded.

I welcome any constructive feedback.


r/RepTimeServices • • 20h ago

Advice How I can I fix a brown crown plastic cover or whole crown

Thumbnail
gallery
3 Upvotes

Can I buy these crown cover or all crown and then who can replace it . I ask around 2 watch guys they say it’s hard to change this and cost if any guess


r/RepTimeServices • • 20h ago

Advice Upgraded bracelet?

1 Upvotes

Can anyone suggest a good place to buy nicer bracelets besides buying the gen? I have a clean factory DJ and the jubilee feels a little toying? Also does anyone know of anyone who could maybe make a Rolex style caseback for my ZF Tudor? Mine is a bit scratchy

I’ve seen some mixed things and a lot about scamming. I am relatively new to the modding aspect of reps and appreciate any help

Thanks in advance!


r/RepTimeServices • • 22h ago

Advice Guessing a new clasp

Thumbnail
gallery
1 Upvotes

Recently had my watch refinished, feels so much better now. I had a new clasp added as the previous one did my OCD in.

However the new one is even worse! I’m guessing I’m going to need another new clasp!

I’ve been offered a submariner bracelet in the UK with the clasp code 3VV - this watch is currently RICH and has a F80 clasp code!

Shall I keep the same clasp code or move to a 3VV - only thing is this is a code for VsF and they don’t use 904L


r/RepTimeServices • • 1d ago

Request Looking for Genuine 41mm DJ Blue Dial for 12634

Post image
4 Upvotes

I’m looking for one for a project. I’m wondering what the going rate would be for a used genuine 41mm DJ 126344
If anyone has or knows where to get one, it would be greatly appreciated


r/RepTimeServices • • 1d ago

Advice SH 3235 rotor noise

0 Upvotes

Correction the TD website listed movement as VS3235

Update TD stated the noise is normal can anyone confirm

Hi, I was hoping to get some insight. I received my VSF DJ from Justin at TK about two weeks ago. I haven’t worn it because there was an issue with the dial print. I wasn’t sure what he was going to do. I put it on this morning and noticed the rotor sounds noisy and the case almost sounds tiny . I have a sub from the QF factory that does not make this noise. Anyone has any suggestions? Be greatly appreciated.

Before the comments about shaking the watch. I know I was shaking a bit aggressively
I Wanted to capture the noise of the spinning rotor spinning. Lol


r/RepTimeServices • • 16h ago

Request Hybrid Daytona ⏱️ x Submariner 🤿 Bezel

Post image
0 Upvotes

Gonna throw this on the table for my next build .
💯 % sure this can be done .
My TD’s gonna ask me a minimum of 10 pieces of each bezel to produce . If you are open to participate , let me know 🙏
Share me your thoughts .


r/RepTimeServices • • 1d ago

Services VR3285 Disassembly

29 Upvotes

I'm sharing a short video from the disassembly of a VR3285 that I've recently done. This is part of a project build that I have been doing and I just wanted to share the breakdown of the movement. I am currently editing the assembly of the movement and will share that once I have it finished. This is my first foray into recording and sharing my work, so I'm still trying to figure out how to record from overhead and not impede the video or my work while doing it. The only thing I didn't record was the removal of the balance jewels and the escape jewel in the mainplate since those were done using my stereo microscope and I didn't have the ability to record that at the time.


r/RepTimeServices • • 1d ago

Request Seeking repair for Bulova Curv.ff

Thumbnail
gallery
0 Upvotes

Hello! 9 yrs ago I gifted my husband the Bulova Curv watch, model 98A161. It is his absolute favorite of the collection he has built over the years but it’s no longer working. After taking it to a watch repair shop in our city that could not repair it, he was advised to mail it to the manufacturer’s repair center to address the issue/s.

He just got an email from the company (Citizen) that the watch cannot be serviced as the parts needed have been discontinued.

Can anyone recommend a reputable watch repair business within Arizona, Las Vegas or SoCal area?

TYIA!


r/RepTimeServices • • 1d ago

Request Anyone have a broken Clean 126500 or a spare crown stem/case tube?

1 Upvotes

I posted a few years ago looking for advice on repairing my Clean 126500- the crown stem when screwing down is incredibly gritty and gets worse each time.

I’m assuming the threads on the crown stem and case tube don’t line up or something.

I’m hoping someone could point me in the direction of a spare setup. I’m also super open to paying someone to repair the watch. It’s beautiful and just sits there in my case because whenever I wind it it feels like it’s breaking.

the movement works great, and everythings perfect but screwing down the crown.

thanks team - any advice or service offers appreciated


r/RepTimeServices • • 1d ago

Advice Tried using AI (Gemini) to QC my RICHF GMT-Master II 126710GRNR "Bruce Wayne" (JH3285 Free-Sprung) from TheOneWatches — Workflow, Results & Follow-Up Questions

0 Upvotes

Just got my 12 QC photos and 2 videos from TheOneWatches for a RICHF GMT-Master II 126710GRNR ("Bruce Wayne") on the Oyster bracelet with the JH3285 free-sprung movement ($758, per order spec).

Before asking for human eyes here, I ran an experiment using Gemini to do a structured first-pass QC to see how thorough it actually is. Sharing my workflow, what it checked, and the follow-up questions it drafted for the TD so you guys can weigh in on both the watch and the method.

How I Got AI to Run the QC

Instead of just dumping photos and asking "GL or RL?", I stepped through it like this:

  1. Set the criteria first: I shared the order spec first and asked it to list every quality check it would validate before seeing any QC media (index alignment, dial print, rehaut, bezel color split/action, cyclops/date centering, hand stack, SELs, clasp, lume, and timegrapher tolerances).
  2. Batch-uploaded everything: I uploaded all 12 QC photos and both videos across two messages, telling it not to analyze until the full set was in so it could cross-check across angles and video frames.
  3. Gen comparison pass: After getting the QC breakdown, I asked it to compare my specific QC shots against a genuine 126710GRNR so I could separate normal factory tells—slightly flatter grey ceramic (IMG_4924, IMG_4922), sharper black/grey split at 6 and 18 (IMG_4924, IMG_4922), slightly tighter 12 o'clock triangle gap to the minute track (IMG_4924), and mild blue cyclops AR glare at tilted angles (IMG_4924, IMG_4923)—from actual RL-worthy defects.
  4. Sanity-checked its assumptions: I pushed back on a couple of things—like whether it actually heard the bezel in the videos (both videos were muted and the bezel was never rotated) and whether the extra movement/clasp checks meant having the TD physically open up the watch.

QC Summary (r/RepTimeQC Format)

  • Dealer: TheOneWatches (order confirmation & QC backdrop)
  • Factory: RICHF (order confirmation; RICH JH3285 stickers in IMG_4924, IMG_4928, IMG_4931)
  • Model: GMT-Master II 126710GRNR ("Bruce Wayne") 40mm, Oyster bracelet, JH3285 Free-Sprung (order spec; IMG_4924, IMG_4927)
  • Price Paid: $758 (order spec)
  • Album Links: [Insert Imgur / QC album link here]
  • Index Alignment & Dial Printing: 12, 6, and 9 markers sit straight and centered over the minute track and the 6 o'clock crown; crisp white and green "GMT-MASTER II" text with no visible dust (straight-on dial photos: IMG_4924, IMG_4922). Rehaut crown sits centered at 12 (IMG_4924, IMG_4923).
  • Bezel: 12 o'clock triangle aligns cleanly; black/grey split bisects the 6 and 18 horizontally with clean platinum-tone fill (IMG_4924, IMG_4922).
  • Date Wheel & Cyclops: Checked across 18 (IMG_4924, IMG_4922) and 18 → 19 → 20 (function video: NOLI1110_batch.mp4)—all centered cleanly with crisp font. Slight cool/blue AR reflection at tilted angles (IMG_4924, IMG_4923).
  • Hands & Movement: Correct hand stack (hour → GMT → minute → seconds) (IMG_4924); smooth 1-hour jumping local hour hand and clean midnight date flip (function video: NOLI1110_batch.mp4).
  • Case, SELs & Clasp: All four SEL corners sit flush with no noticeable gaps (IMG_4924, IMG_4922, caseback shot: IMG_4931); clean case profiles and crown guards (IMG_4925, IMG_4926); bracelet finishing looks solid (IMG_4927, IMG_4928); closed clasp coronet and seams look tight (clasp photo: IMG_4929).
  • Timegrapher: -1 s/d to -2 s/d, 282°–284° amplitude at a conservative 52.0° lift angle, 0.0 ms beat error, 28,800 vph, clean flat trace line (timegrapher video: XPJJ0883_batch.mp4).

Follow-Up Questions AI Suggested Asking the TD

AI gave it an overall GL, but flagged four items missing from the initial 12-file batch and drafted these follow-up requests for the TD:

  1. Open-caseback movement shot: Focus on the balance wheel to visually confirm it's actually the JH3285 free-sprung movement (no regulator arms) rather than relying solely on the stickers (IMG_4924, IMG_4931), with a reminder to tighten the caseback properly afterward.
  2. Bezel rotation video (with sound on): Rotate both directions to check click crispness, alignment, and backplay when settling at 12 (neither NOLI1110_batch.mp4 nor XPJJ0883_batch.mp4 touched the bezel or had audio).
  3. Lume shot: Dark-room photo to verify even blue Chromalight glow across all indices and hands.
  4. Open clasp blade & Easylink photo: Check inner clasp engravings and the 5mm extension (non-invasive, no tools required).

Questions for the Community

  1. Do your human eyes spot anything on this piece that AI missed?
  2. For those who've bought free-sprung JH3285/DD3285 pieces from Steve/TheOneWatches: would you bother asking them to pop the caseback open to verify the balance wheel, or leave the factory seal/gasket untouched and just ask for the bezel, lume, and clasp checks?

r/RepTimeServices • • 2d ago

Advice Daytona Paul Newman x Hulk Meteorite

Thumbnail
gallery
9 Upvotes

On the verge of ordering another new restomod build using a Green Meteorite dial that was proposed to me.
Base template dial will be the 6239 Paul Newman dial with the Lollypop subdial markers .
Torn if I will go for the Black or just plain green Meteorite subdials 🤷🏻‍♂️ ?
What’s your pick ?


r/RepTimeServices • • 1d ago

Advice Dial reluming advice

Post image
3 Upvotes

I have a franken 16610LN. The dial is a 'SWISS MADE' Sillan, hands are gen and there is a noticeable mismatch between the daytime colour of the lume. The gen hands are superluminova and are bright white in colour. The lume on the Sillan dial is a creamy/green colour. I am considering reluming the markers on the dial. I have no experience with this and will be practicing on a trash BP dial I have lying around. I am wondering does anyone have any experience with this and/or are there any tutorials available online.

I am aware I will need to remove the hour markers and scrape out the old lume before attempting to relume. It seems like it will be a difficult thing to do, based on what people say. Nonetheless I still want to give it a go.

Any advice would be greatly appreciated.


r/RepTimeServices • • 2d ago

Advice Clasp pin falls out - Tudor BB58 ZF Factory

2 Upvotes

Just got this from Steve at Theonewatches… immediately the pin fell out and doesnt stay in when the clasp is open… what should I do?


r/RepTimeServices • • 2d ago

Services Any trust VSF servicing in the Ontario, Canada area ?

7 Upvotes

Looking for any Trust service provider for any vsf servicing in the Ontario Canada area.

Much appreciated


r/RepTimeServices • • 2d ago

Question Crystal Gasket Specs - VSF V1

1 Upvotes

Hello all,

I am looking for a new gasket for a VSF V1 base. I need the Specs of the gasket since I can’t find any infos on them anywhere.

I asked some days ago but i could Not get a answer.

I hope to find some clues. I would really appreciate if someone could help.

Thanks in Advance!:)

Edit: it is Datejust 41mm VSF V1


r/RepTimeServices • • 3d ago

Services Just a full service result I'm proud of

Post image
47 Upvotes

This DD3235 movement arrived completely non-running, bone dry, with a destroyed hair spring from a screw that had gotten into it from the case clamp. I swapped out the hairspring with one I had on hand, and gave the rest a full service. I love that rush of getting it on the timegrapher and seeing results like these!


r/RepTimeServices • • 2d ago

Question NTTD- Hacking seconds doesn't work

6 Upvotes

Hi guys. I just bought a VSF V7 NTTD and unfortunately it seems like the movement is faulty.

When I pull out the crown, the seconds hand doesn't stop. Is it a minor issue by any chance? I don't have access to any rep friendly watchmakers