r/SuzukiSamurai • u/EdgeMarkx • 1d ago
r/SuzukiSamurai • u/IcarusOffroad • 1d ago
Hello older Cousins!
My old 1996 JA22 Jimny, imported from Japan.
r/SuzukiSamurai • u/justnoworries • 1d ago
Suz stalls when i press in clutch
is anyone familiair with this problem? Can’t figure it out. So only when i press the gas lightly it keeps running, but it just dies when i press in the clutch.
r/SuzukiSamurai • u/gumbygabe • 1d ago
Update: speed, idling and heat soak issue
reddit.com- Speed: So we checked the timing, did a smoke test for leaks and cleaned the throttle body. After putting things back together speed/power seems to be restored and I'm able to hit 70 on the highway again so I think something must've been gunking things up and was dislodged or removed.
- idling: The idling issue (rpm dropping below 500rpm when releasing off the throttle) is still happening but it's a lot better. I might adjust the bypass screw incrementally to see if that helps keep it at a steady rpm
- heat soak: I'm really concerned about this one. the car will not start up after it's been warmed up. cold starts are fine but it's really annoying when I have to somewhere for a quick run and then can't re-start the car without keeping foot on the pedal. anyone have notes on this or what I should be checking next? the heat soak was not happening before the head was pulled
r/SuzukiSamurai • u/Frosty-Beautiful3179 • 1d ago
Ticking/Knocking noise in engine bay - sj410
hello guys, new here.
recently got myself a suzuki samurai 1984 - sj410.
its still got in 1.0 engine.
as of recently - it started making weird ticking/knocking noise in engine bay.
i've tried -
- changing oil + oil filter.
- adjusting valve clearance.
Can anyone help with some knowledge about what more could be the problems?
please excuse the messy bay, hadnt had time yet to clean it..
r/SuzukiSamurai • u/NewAbyss • 1d ago
Colorado registration help.
I've been having a hell of a time getting my 1987 Samurai to pass emissions. I have to do an engine rebuild, but that's out of the cards atm. I've passed everything but co and my engine isn't getting enough combustion and have tried/failed 5 test. I just want to get registered so I don't have to drive looking over my shoulder. If I rent a po box in a county that doesn't require emissions can I work around having to pass in Boulder county? Just trying to figure out what steps I would need to take. For example would I have to go to let's say Mesa county and register my car there in person if I set up a PO box there? Can I do it online? Does that even work? Any advice I could get would be much appreciated.
Also I've posted before I've had people tell me to try and do this out of state. I would prefer to stay in state and see if I could get away with it. Last time I brought out of state up people from that state were upset that I mentioned it haha.
r/SuzukiSamurai • u/pqvg • 2d ago
Land cruiser j71 leaf springs
Since I can't get jeep parts, is it possible to modify the mounts to mount j71 leaf springs on a suzuki samurai? And are they worth it?
They were on leaf springs till '97
r/SuzukiSamurai • u/Clear-Orchid-6441 • 3d ago
Opinions on Masterforest modular soft top?
I’m looking for a soft top for my sj413, and I stumbled across masterforest and they have a “modular” lineup.
Does anyone have any experience with those modular soft tops? Are they less durable?
I’m located in Poland so american brands are not in the picture.
All responses welcome :))
r/SuzukiSamurai • u/thekilller • 3d ago
Options for a blown transmission?
Hello, this is my first post on this place, and I'm looking for help/options.
I have a 1988 samurai, pretty much stock on everything except the tires, I have had it for 2 years and has been plenty reliable, the other day at city speeds the transmission blew up completely.
Not the inside of the transmission but the casing of it, behind the shifter.
I am from Mexico and as you guys know there aren't that many spare parts available and I would imagine that even less in Mexico.
Is replacing the full transmission the only option?
If I am at this point maybe looking into replacing the engine and transmission with a newer one from a geo metro an option?
Honestly I also don't have the kind of budget to just fix it with the "best" things available, so Im looking at the cheapest option, if there isn't it might as well just head up to the junkyard.
Thanks all!
r/SuzukiSamurai • u/LarkCanyon • 4d ago
Update: Full UI demo of the custom Samurai Infotainment system
r/SuzukiSamurai • u/Acceptable_Mountain5 • 5d ago
Who has done a full body swap?
My samurai was completely covered in rhino liner inside and out by the previous owner and I really want to remove it. I started using citrus strip on the inside but it is such a messy and loooooong process and I don't really have the time for it to be out of commision for as long as it seems like it is going to take.
So I am weighing my options, pay someone to strip/sandblast the ehtire thing, then deal with whatever body work will most definitely need to be done, or find another body and swap it. I am a little intimidated by the idea of swapping the body, I have never done anything this big before. It doesn't seem all that complicated, but I know there will be things I haven't considered. Can anyone who has done it share some pointers/pitfalls I may run into?
Thanks!
r/SuzukiSamurai • u/Y0semite_Sam • 6d ago
Went exploring in the area around a friend's cabin outside of Truckee, CA.
I didn't have much time, or any friends to get me out of trouble if I did something too dumb so I played it pretty safe. I can't wait to go back and check out more.
r/SuzukiSamurai • u/Superb_Home274 • 6d ago
1989 Suzuki Samurai 1.3L – Replacing water pump. Should I replace the timing belt too?
Hey everyone!
I recently bought a 1989 Suzuki Samurai with what appears to be the original, stock 1.3L engine (SJ500).
I've noticed a coolant leak, especially when the engine is cold. I took it to a mechanic, and he diagnosed the water pump as the source of the leak and recommended replacing it.
Since I'm new to this car, I have a few questions before ordering parts:
- Water pump: Any recommendations for reliable brands? I'm currently considering GMB.
- Timing belt: Since the water pump needs replacing, would it make sense to replace the timing belt and tensioner at the same time? I have no idea when they were last changed, or if they've ever been replaced.
- Alternator/fan belt: Should I replace this as well while everything is apart? I'm considering the Gates 7330.
- Anything else: Are there any other parts, seals, or gaskets worth replacing during this job?
I'm currently looking at parts on RockAuto, but I'm open to other recommendations.
I'd also appreciate any advice on compatibility, since my Samurai is an SJ500 and I'm not sure whether all the parts listed for the 1989 US-spec Samurai 1.3L will fit.
Thanks in advance!
r/SuzukiSamurai • u/pqvg • 6d ago
Are those good?
I want to fix the leaking knuckles on my samurai, and I saw this at ebay, is it good? And I heard I can use Jimny's knuckle seal kit also, is that true?
r/SuzukiSamurai • u/dutch23 • 6d ago
More SJ413K
Figured I'd continue with posting the SJ413K I purchased and am working on getting all fixed up.



















Figured Id post some more photos of my 85 SJ413K and what progress Ive reached with it so far. Swapping to YJ springs and samurai axles. Got the rear axle mocked up, but still waiting on parts to come in to start fully assembling stuff. All the photos should have a caption, hopefully this format is readable.
r/SuzukiSamurai • u/TheWisco • 6d ago
1988.5 Suzuki Samurai Tin Top
I just got this thing the other week. My motorcycles are pretty similar sounding to this engine... So to me it sounds pretty good. Anyone else hear something I don't? RPMs high?
Thanks
r/SuzukiSamurai • u/Spiball2 • 6d ago
Show me your interior
Just bought my first samurai, and it's definitely a project. I wanna see all of your interior ideas, especially if they are cheap, and especially ideas for budget seats.
r/SuzukiSamurai • u/Plane-Display-9058 • 7d ago
Fuel issue
87 suzuki samurai that was swapped with a 1.6l 8 valve. I bought the rig from my dad who bought it from some guy in arizona. It has an electric fuel pump and typically when starting I hear a buzzing noise. Took it for a spin today and lost power and died like it wasn't getting fuel. When i got it back to my house and filled the carb with gas it would run while there was fuel in the carb. I noticed with key on it no longer makes the buzzing. Looking online it says the pump or the relay. I'm assuming the wiring was done by whoever did the swap and i can not locate a relay anywhere under the dash aside from the relay attached to the fuse panel. Im terrible with electrical and could really use some tips on how to trace down the issue.
r/SuzukiSamurai • u/Acceptable_Mountain5 • 10d ago
Clutch engage/disengage distance
The clutch on my 88 samurai works fine, but the distance between when the clutch starts to engage and is fully engaged is extremely short, maybe 1” of travel. Is it possible to adjust the clutch to make that distance longer so I can make shifting a little smoother?
r/SuzukiSamurai • u/_kurt_propane_ • 10d ago
And now I think want one
I just found out about these today and I think I want one! Is there a guide for what to look for? I didn’t see one so apologies if there is.
Do you think it would fit my needs? I need it for driving around about 7 acres, doing light duty like a big Polaris kind of thing and then going downtown or around town a little. No city or highway really just a smaller easier drive than my truck or van.
r/SuzukiSamurai • u/Spodimus • 11d ago
CARB Certified Catalytic Converter Recommendations
I have a 1987 Suzuki Samurai that I’ve been working on for a while. I initially tried to get it smogged in CA, but the catalytic converter was bad. I replaced the cat with an EPA certified one from EBay (w/ a connection for smogging because I acknowledge that I am in California and it doesn’t pass based on that alone), but I just took it in an it failed.
When idle, all levels are green, but when it accelerates, it fails CO (3.43%) and HC (226 ppm) by a significant margin.
I have a new carburetor from Certified Machine (Toyota 3K carb) tuned for the Samurai. 1.3L 4 cylinder engine. I replaced the exhaust as well with one from Rock Auto. I just checked the O2 sensor and it seems to be working (voltage fluctuating between 0.1 and 0.8 V).
My question is: are there any other problems that might cause it to run that rich other than a non-satisfactory cat? If not, the only cat I can see that are CARB compliant are cut-and-weld. Has anyone utilized these and had decent luck with them?
Thanks in advance!
r/SuzukiSamurai • u/Spiball2 • 11d ago
Good price?
Is this a good deal for $1200 for just the truck?
r/SuzukiSamurai • u/nixxxx_ • 12d ago
Extremely low idle when it’s cold (air temperature)
Hey guys, now that winter is coming and the temperature is dropping, i’m noticing that when it’s less than 8 C (46F) and i’m doing a cold start, initially the engine idles normally and stays at around 1.7k to 2k rpm (normal for my sammy when it’s cold) but after around 5 mins the idle drops to like 200 rpm (don’t know if the number is accurate, it’s what the cluster says) and stays there.
Feels like a candle that can get blown out by a butterfly, but it mostly holds that rpm.
I’m guessing something is wrong with the idle control because it can rise and then drop again. 1.3 engine with stock carb, 88.5 model
r/SuzukiSamurai • u/dutch23 • 13d ago
New project rig
Overpaid for it, but it’s been a dream rig to own. Was imported from Canada to the states a few years ago. Has a decent amount of rust on the body in the usual spots. Paint is a 3/10, laid on thick and with a lot of overspray. Rear axle is bent, swapping to samurai axles and yj springs.

