r/Taurus_TX22 • u/Tinofpopcorn • 1d ago
Troubleshoot I fixed my TX22
I've been having issues with my TX22 since it came out of the box. I know plenty of people without a single issue and I think its a great gun. My TX22 would jam the same way everytime, nose up case bent in half/dented in the middle. Here are some of the things I tried,
Clean the mags
Put a mirror finish on every piece of metal visible in that gun
Lake line mag followers (bullet angle)
Use the magazine loader (bullet angle)
Bought a new mag
Thoroughly cleaned before every range trip
Tried holding the magazine in incase it was the mag release. (Bullet angle)
Tried at least 12 different types of ammo
Dump 1500 rounds through it to break it in.
I'm Sure theres more but I cant remember at this point. But what 3 of these had in common was they were trying to adjust the angle of the bullet. I looked at where the feed ramp meets the chamber and it squares off pretty steep, ramming the nose into the beginning of the chamber which in many cases causes it hang up and dent the middle. I recently had to rethroat an AR45 and I started seeing similarities between how the two guns were jamming. The fix was easy but will probably void the warranty.
The fix,
I took a round filer and rounded where the feed ramp meets the chamber, I wanted to make the transition from ramp to chamber smoother. I did it by hand and I didnt take much off at all. You can always take more off, you can't put more on. Second I put an old .22 bore mop in a drill and put flitz polish on it and went to town on the chamber till it shined.
Testing
I was shocked to get through that first mag, I thought it was a fluke. I took it to the range and dumped 200 suppressed rounds through it of only the finest/s remington gold tip hollow points, federal 40 grain lead, CCI mini mags, winchester hunt/target rounds and a bunch of random .22s i found at the bottom of my range bag. It ate everything flawlessly. I didnt have any nose up dented rounds.
Last small issue.
I did have 3 failures but I dont blame the gun. 1st was a dud round from the Winchester target/hunying loads, not the guns fault. The second was a magazine issue. I have 2, 22 round mags and I numbered them to keep track of which was which. Mag 1 has a lake line follower, mag 2 is stock. The 2 other jams I had were with mag 2 with nose down jams that pushed the nose deeper in the mag, never making it into the gun. When I was loading mag 2 by hand I could tell the stacking angle with the rims was off, like some of the bullets wanted to point down. The 2 times I noticed this and thought, this seems like it could be a problem, it became one! I found loading the bullets very flat into the mag fixed it. If I put the bullet in steep pushing down the next round with the rim, there was a good chance it would jam, it was easy to tell where the bullet wanted to go. I can see why people say use the loader.
The lake line follower didn't fix my problem originally and both magazines preformed the exact same way jamming within 10 rounds with the same style jam before my barrel fix. After my fix the lakeline follower worked flawlessly. Using mag 1 with the lakeline follower worked great no matter how I crammed random bullets into it. I tried to get it to jam and recreate the problem shooting as fast as I could and it was still perfect.
This was my experience, if anything I would try polishing the chamber with flitz using a bore mop first to see if that alone helps before doing any modification that will void your warranty. Hopefully this helps!