r/TerrainBuilding • • 11h ago

WIP My Trench Game Board Is Coming Along Nicely!

Thumbnail
gallery
285 Upvotes

I've been working on a modular trench board for 40k this month and I'm almost finished with the first of four 44x20" panels.

Couldn't resist setting up some of my guard to snap some pictures and get sense for how it's going to look in the end.

Things left to do;

- Apply some pigment powders
- Add some grass/foliage to bring in some color and visual interest
- Do a few resin pours into the craters
- Paint the edge banding
- Add posters and small scatter details within the trench
- Varnish


r/TerrainBuilding • • 10h ago

Vallejo still water cloudy after 48h+

Post image
169 Upvotes

My water was pretty cloudy after 48h and I read a post in a naval forum saying: put it under the sun, might help with evaporation.

Made it even cloudier. Is there any hope it will cure back transparent? Am I better off peeling it?

I did apply 3 thin layers over 4 days. Then I realized I should’ve bought uv epoxy for this but oh well.

Starting to lose hope but I’m afraid if I remove it I’ll break the surrounding terrain.


r/TerrainBuilding • • 42m ago

Scratchbuilt Recently finished build

Thumbnail
gallery
16 Upvotes

I built it avoiding making it too symmetrical, tried to keep that whimsical mordheim style. Feedback is very welcome.


r/TerrainBuilding • • 10h ago

Full Table First time Multi-Level HO Scale build on a 4×5 layout right in my living room

Thumbnail
gallery
39 Upvotes

Crafted Rock strata from XPS pink Foam on a 4×5 layout right in my living room

Its about 90% done with A Multi Level track and A river bed cut out with an acrylic piece. Adding it for drama over my truss bridge. Also added tunnel portals with some of my own graffiti. Really enjoyed doing this never thought id be having one for my own.


r/TerrainBuilding • • 13h ago

Scratchbuilt Display Plinth for finished models in living room

Thumbnail
gallery
50 Upvotes

My partner suggested that I display the models I had most recently painted on a little terrain piece rather than just on a shelf...this is the result.


r/TerrainBuilding • • 15h ago

Scratchbuilt 15mm Northern France roads

Post image
58 Upvotes

Thoughts appreciated!


r/TerrainBuilding • • 19h ago

Saxon Farmhouse

Thumbnail
gallery
49 Upvotes

Test piece for an upcoming village, feedback welcome.

Resin by Ragnarok Miniatures. Scatter terrain by Ragnarok, Hirst, and Victrix.

Shout out to u/Laytover997 for the basing material. PVC project board at Home Depot. 1/8 inch, cheap, stiff, cuts sands carves and takes paint. What's not to love.


r/TerrainBuilding • • 16h ago

Custom handmade 1:64 scale waterfront street diorama

Thumbnail gallery
28 Upvotes

r/TerrainBuilding • • 1d ago

I made a bridge. Space marine for scale.

Post image
957 Upvotes

About 6'5". Primed black and drybrushed dark metallic. Want to paint the spires brass/bronze. Undecided about rusting the hell out of it or doing anything else.

But it sure do look like itd be fun spanning a whole 40k map longwise!


r/TerrainBuilding • • 23h ago

Scratchbuilt Best tools for scrabuilding pipes and other things ?

Post image
69 Upvotes

Hi everyone ! I'm working on a Mordheim table with a Frankenstein vibe and I'm having difficulties finding materials for pipes and technologic bits and bobs.

Right now i work with a lot of parts from the inside of old dvd players but i'm lacking a bit of material.

So i ask for your infinite wisdom !


r/TerrainBuilding • • 1d ago

3D Printed Large, Brutalist 6mm building

Thumbnail
gallery
254 Upvotes

Inspired by a building I walked by at a Con.


r/TerrainBuilding • • 1d ago

Diorama Forgot to post the finished project here after my WIP! Redwall Shadowbox complete!

Thumbnail
gallery
113 Upvotes

r/TerrainBuilding • • 22h ago

3D Printed I wanted a dice tower that's also playable terrain, so I've designed this base & roof to work with the cheap/free TT Combat cardstock buildings. Constructive feedback welcome!

Thumbnail
gallery
26 Upvotes

r/TerrainBuilding • • 21h ago

Questions for the Community Grass: To Paste or not to Paste

Post image
14 Upvotes

I've been making xps foam terrain for a little while, and have run into an issue where every aspect of it has a niche industry, tool kit, and/or technique involved with it. Today, I am questioning the 30+ hours of grass I have made.

I have gotten turf squares, shaved them, used Mod Podge to create a paste that I then "paint" on. Outside of buying a $70 static grass applicator, is there another technique? Would static grass work as good or better then shaved turf? Any suggestions would be appreciated.


r/TerrainBuilding • • 21h ago

I need help with Wuxia Diorama

Thumbnail gallery
16 Upvotes

r/TerrainBuilding • • 1d ago

WIP First timer making some rudimentary map pieces for a tabletop game

Thumbnail
gallery
66 Upvotes

This WIP is loosely based on Warsaw, Poland during WWII. Constructive criticism welcome!


r/TerrainBuilding • • 1d ago

Have Another Balin's Tomb on Me

Thumbnail
gallery
66 Upvotes

"They have a cave troll."

I started out with XPS foam, air-dry modeling compound, Milliput, and 2005 Ganes Workshop Balin's Tomb plastic. Hit that shit with Mod Podge to seal it for my rattle can.

From there, I worked it from ~8am today to about 6pm. Sick fuck.

Primed it gray.

Dry brushed it with Karak Stone.

Then hit it with a light gray dry brush that I mixed, and a lighter gray edge hightlight on all the stone.

Then a mostly black acrylic ink wash I mixed myself. First time doing that. Super happy with it.

Then a generous dry brush of light gray again. Used the lighter one on the sarcophagus lid.

Then, hours of detailing. I painted every little skeleton, rusted old axe, wooden chest, door, book, and so on. The pages on the floor of the chamber were stained, scribbled on, and cut out of regular printer paper by me, and then Mod Podged to the floor. I painted any paper on the terrain model pieces white, and then stained them with the same brown ink wash so they'd all match. Then I used rocky sand from my driveway to add texture and hide the edges of any model pieces on the floor, and stuck that shit with Mod Podge.

Matte clear coat, and voila.

Dig that perfect sunbeam on that gray dry brush step.

The Fellowship models are the standard Fellowship box, and the goblins and cave troll are 3D prints.


r/TerrainBuilding • • 1d ago

Scratchbuilt Building my pillbox

Thumbnail gallery
257 Upvotes

r/TerrainBuilding • • 1d ago

Scratchbuilt Dangerous jungle terrain.

Thumbnail
gallery
55 Upvotes

Attempted to make dangerous terrain ( carnivorous plants ) frim pistachio shells. (Yes I know they may need a dental plan)


r/TerrainBuilding • • 23h ago

Questions for the Community Help with Proxxon hot wire cutter :((

Thumbnail
gallery
6 Upvotes

Hi, I need some help with the Proxxon unit I just received

I bought it second-hand and was setting it up to test it, but the knob used to adjust the tension of the wire that runs through the table is tightened all the way down

I can’t loosen it by hand, and I don’t have any pliers to help; I do have some WD-40, so perhaps I should try using that

If you have any advice, or if you happen to know whether tightening the knob this much could have damaged the Proxxon, I’d appreciate your input

Thanks in advance !


r/TerrainBuilding • • 5h ago

Questions for the Community A moral dilemma.

Post image
0 Upvotes

I bought this 3d printed Mary in a thrift/op shop. It cost me a dollar. My question is, will I be in trouble ( with the big guy upstairs ) if I convert this to a statue of Saint Euphrati Keeler?


r/TerrainBuilding • • 1d ago

3D Printed Two more houses for the Empire City are ready for the game!

Post image
76 Upvotes

r/TerrainBuilding • • 1d ago

Diorama Beach diorama 1:64 scale

Thumbnail gallery
17 Upvotes

r/TerrainBuilding • • 1d ago

Scratchbuilt I made a thing 🙂

Thumbnail gallery
57 Upvotes