r/Tools • • 22h ago

Probably the hardest I've worked for a meme

Post image
244 Upvotes

Stilson sword in progress. Kindly donated, and the wrench was utterly fucked and welded multiple times, before someone gets upset about how I waste my time.


r/Tools • • 9h ago

Went to my parents house and left with some snap on goodies

Post image
99 Upvotes

Just started learning how to work on my car and buy tools this year and up until a month ago I didn’t have any Snap-on because I mean why would I? I don’t do this full time or anything. 😅 But my dad dug out his old toolbox and found some of these and told me I could take them.


r/Tools • • 17h ago

My Craftsman Box

Post image
86 Upvotes

r/Tools • • 18h ago

Made a tool for die grinder

Thumbnail
gallery
68 Upvotes

Hello,

A while back I made this kind of apparatus for a die grinder.

I got a job to fix cast steel gear wheels that had some cracks and porosities from casting and this tool is for "machining" the filler welds back to the original level.

Quite a simple tool. The die grinder bit does not reach any deeper or wider than the tool surface.

It did the job right and fast, I'm happy how it turned out.

There is a video in the comments of using this.

What do you think?


r/Tools • • 8h ago

Anybody know what this kind of hammer is for?

Thumbnail
gallery
64 Upvotes

r/Tools • • 13h ago

Use and abuse

Thumbnail
gallery
49 Upvotes

My son abused an HF hammer😄


r/Tools • • 22h ago

Craftsman advent box

Post image
35 Upvotes

I saw this walking into an Ace Hardware the other day. Just hoping eventually we get a Ryobi or harbor freight one.


r/Tools • • 11h ago

NTD - NOS 18 gauge brad nailer - never used

Post image
31 Upvotes

My dad had purchased this before he passed away. I don’t think he ever got a chance to use. I’m really happy to be able to use it.


r/Tools • • 14h ago

Of Course it is the 10

Post image
22 Upvotes

Popped open my box of sockets... guess which one I needed for a project? Off to the store for a replacement. Or make that two.


r/Tools • • 40m ago

Found this in my coat pocket this morning

Post image
21 Upvotes

r/Tools • • 18h ago

What Torx drive bit brand do you absolutely swear by?

21 Upvotes

Alright, so I want to hear from the folks who have put 100,000s of screws through their impact driver so I can learn from the experience and save myself some headaches. 😁

Was just reminded of the joy in removing a cammed-out structural screw. Would like to maximize the time between now and the next cam-out. 😂


r/Tools • • 20h ago

Looking to see if there's a tool out there that'll help

Thumbnail
gallery
15 Upvotes

I'm hoping there's something out there that can help with a pretty specific problem. At my work we handle and rack a lot of wooden barrels, when going onto the racking the bung needs to be facing upwards so that while it's being stored it doesn't leak. Effectively, the barrels are rolled onto tracks that keep them in line and stop them from turning as they roll to the end of the row (pics aren't mine but pretty much the same as what we have). Most of the time the way we load them onto the forklift to get them onto the racks does the job and no adjustment is needed. But sometimes the bung is just at a bit too much of an angle to be left so what we end up doing (if it's not miles from what we need) is reaching in and shifting it by hand, which is a pain because these things can be between 200-300kg. Or we roll it all the way off, adjust, then roll it back on. I want to know if anyone on here knows about a tool that we can use on the ones that need just a small adjustment more easily than doing it by hand, and without spending a huge amount of money on something that rotates the barrels for us. In my head I'm thinking of some kind of leverage bar with a strap or chain that can go around the barrel and and hook onto the lip on the head of the barrel in order to turn it more easily. (bad drawings for reference).


r/Tools • • 12h ago

Jaeger 16pc MM/Metric Set

Thumbnail
gallery
13 Upvotes

Great reversible ratcheting wrench set (6-25MM skips 20 & 23) $70. Can also use 11mm, 17mm and 22mm with my Astro nano sockets but reversible! I got non flex since most flex heads are too floppy for me.

https://a.co/d/0auCJ6W5


r/Tools • • 15h ago

Wire wheels. What do you keep them in?

8 Upvotes

I need a solution to contain my wire wheels. They just rattle around and hide until I'm in a hurry and they need a taste ofy nailbeds.

Will live in a tool bag.

Y'all have a way to prevent my perpetual torture?


r/Tools • • 21h ago

Best snow blower for heavy snow? Wet snow is destroying my current machine

8 Upvotes

The light fluffy snow isn't much of an issue. It's the heavy, wet stuff that makes clearing the driveway miserable. My current blower keeps clogging, and sometimes I have to stop every few minutes to clear things out. Last winter, one particularly bad snowfall took almost twice as long to clear as it should have.

I want to replace it with something designed for heavier conditions. Looking at machines with better auger systems and stronger engines, but I don't want to assume the biggest machine is automatically the best one. There's a big difference between a machine that can move light snow and one that can consistently handle the heavy stuff.


r/Tools • • 10h ago

Specific Tool Brands

6 Upvotes

New to the community!

Currently restocking on my tools and had always wondered, what brands do you know of that are well known for producing a specific tool to a high quality.

From screwdrivers, chisels, wrenches, etc.

Im currently deep diving into japanese brands so if you have any suggestions that would be great.


r/Tools • • 16h ago

What type of hand rotary tool would you recommend for a hobbyist watch modder?

6 Upvotes

Specific use cases would be sanding logos off cases, polishing, grinding crown stems, and grinding dial feet. Not sure if I need the power of a brushless motor or if I can get away with something on the cheaper side. Any input/experience is appreciated. Thanks!


r/Tools • • 17h ago

Used power tools-risky or smart (or both 😂)

6 Upvotes

Hi all! Thanks so much for all the help in my past few posts.

A lot of my hand tools I got off of eBay, fb marketplace, etc. I recently bought a house and I'm trying to get all the basics (both skills and tools) with quality and budget in mind. I'd rather spend more upfront for shit that is going to last than crap that I have to replace.

I've been hesitant to do that with power tools. Is buying 2nd hand a good way to get power tools cheaply? If so, are there types to avoid buying used and ones that are relatively safe to buy used?

I bought a Milwaukee m18 fuel set (hammer drill, impact driver & wrench, 6.5 circ saw, grinder, and 5" orbit sander). Picked up a cheap Ryobi battery set (2 amp, 4 amp).

Thanks again, y'all have been great!


r/Tools • • 5h ago

Tool ID

Post image
5 Upvotes

Other than a monkey wrench what would you call this? Looking for some terms or phrases to be able to find one for myself.


r/Tools • • 11h ago

Are these okay

Post image
5 Upvotes

r/Tools • • 4h ago

Talk of a tool that could build the Noah's Ark but still trying to figure out the purpose of this section

Post image
4 Upvotes

r/Tools • • 15h ago

Craftsman Lock Set Sourcing

4 Upvotes

Hello everyone. I tried looking around on the web but I'm unable to find any of the Craftsman locks sets. I'm assuming they're no longer made. I'm looking to re-key a Rollaway lower (lock has a rectangular back that connects to bars) with an upper chest (hook type latch) to the same key. Problem I'm having is finding a set with the different lock styles together on the same key. The part number for the one I previously used was 65584, the heavy duty lock set (even though the box is standard duty) My next stop is a locksmith during the week to see if they have anything. Was wondering if anyone had any ideas for keyed sets?


r/Tools • • 22h ago

Got a new shop vac, and it sucks.

Post image
4 Upvotes

Which is great.

I use it in my home basement diy workshop so I don't carry to much dust, chips and other stuff into the house.


r/Tools • • 6h ago

Lateral play front shoe

3 Upvotes

Yesterday I bought a brand new electric planer ( Makita DKP180z). When I unboxed the tool and inspected it, I noticed something odd.

The front shoe (sole) has some lateral slack. (1-2MM from left to right). I know some cheap models have this issue, but isn’t this way to much?

Is this acceptable or should I return the planer and ask for a new one?