r/TrueChefKnives • • 4m ago

Maker post Restored Rusty Nakiri

Thumbnail
gallery
1 Upvotes

Hi guys,

I restored this unknown nakiri.

Discarded the handle and got a new one on it,

Thinned it on a shapton 320, then King 1000, then 600 Grit Sandpaper and a polishing wheel on the Former Kurouchi now Nashiji.

Then acid etched.

Rounded all the corners and coated it with beeswax.

Sharpened on an Aoto natural stone.

Its for sure handmade but I dont know who made it.

If anyone is interested in buying it just dm me 😄 im looking to sell it


r/TrueChefKnives • • 1h ago

Question What other knives should I add to my current line-up with the sales happening right now? Any recommendations would be appreciated! Thanks

Post image
3 Upvotes

r/TrueChefKnives • • 2h ago

Question I'm looking for a good santoku knife. My limit is $200

2 Upvotes

I want to get a Christmas present for my Aunt. Her most used knife is a santoku. She really likes how damascus looks, but I also think she'd like one that still has the scale (I think that's what it's called) on the spine. I want to get her one that looks really nice, but doesn't affect functionality.


r/TrueChefKnives • • 2h ago

Knife ID

Thumbnail
gallery
0 Upvotes

Chef adam byatt use this knife in every video he does. I know it’s a Misono ux10 but I’ve never seen one with this profile and length.


r/TrueChefKnives • • 4h ago

NKD: Baba Hamono Kagekiyo Gokujo in White #2

Thumbnail
gallery
33 Upvotes

210mm Gyuto forged by Tanaka, sharpened by Wakae Yuki

Opted for the green urushi lacquer handle

Came with a tenugui and assorted infosheets


r/TrueChefKnives • • 4h ago

Question Honesuki advice and Black Friday

2 Upvotes

Hi all,

I was looking for a Honesuki for chicken butchery and occasionally small tasks. I’d prefer single bevel but I’m ok with double bevel.

Budget: $160-ish, willing to go over a bit if it’s worth it
Location: US
Steel: any

Also, with Black Friday approaching, does anyone know any stores that have good sales going on?

Here are some of the knives I was looking at:
https://www.chefknivestogo.com/kosldho15.html
https://www.chefknivestogo.com/koshbl2bu15.html
https://www.chefknivestogo.com/kobl2naho15.html
https://www.chefknivestogo.com/moho15.html
https://www.chefknivestogo.com/kosldho15.html
https://www.chefknivestogo.com/todputkn15.html

Any advice would be greatly appreciated, thank you.


r/TrueChefKnives • • 5h ago

Cutting video S-Grind Gyuto - Kurt Glatt

21 Upvotes

As in my NKD post stated. Here is my cutting video with my new replacement knife. I somehow got really nervous while cutting the oninon in front of the camera. So pls. ignore the shaking lol. Somehow fortgot to add the zucchini, but have it recorded if anyone is interested. Enjoy!


r/TrueChefKnives • • 5h ago

Petty to pair with my new Matsubara 210 gyuto – Nigara VG-XEOS vs Shigeki Tanaka Ginsan?

1 Upvotes

Just picked up a Matsubara 210 gyuto and now I'm hunting for a petty to go with it. I've got it down to two 150s:

- Nigara VG-XEOS Tsuchime Migaki, Padouk wa handle: https://www.meesterslijpers.nl/en/nigara-vg-xeos-tsuchime-ebony-petty-15-cm

- Shigeki Tanaka Ginsan (Silver #3): https://www.meesterslijpers.nl/en/shigeki-tanaka-gingami-3-petty-15-cm

I'm after an all-rounder: fruit and veg prep, trimming, some in-hand peeling, plus the little board jobs that aren't worth pulling the gyuto out for.

Thing is, I haven't used pettys much, so I keep flip-flopping on what actually matters. Do you guys prefer a wa or a western handle? A slimmer, lower profile or a taller mini-gyuto shape with some knuckle clearance? A thin grind, or something a bit beefier I don't have to baby? Half of me says the gyuto already covers board work, so the petty should be the thin, precise one. The other half says a petty is the knife you grab without thinking, so tougher makes more sense.

I'm in Europe and would like to order from Meesterslijpers, so if they've got something else in stock that fits, I'm all ears. Cheers!


r/TrueChefKnives • • 5h ago

State of the collection NKD - Kurt Glatt Elementary S-Grind Gyuto

Thumbnail
gallery
12 Upvotes

Hey there TCK! This kind of a special NKD because there is a bit of history of how this knife came to me, so enjoy ;)

About a few weeks/ maybe months ago, while prepping some Hokkaido my Kurt Glatt - 240 mm Gyuto was stuck in the Pumpking, while having the handle about 2 feets away from the counter top... *Whoops* it honestly crushed my heart but still had to make some dinner so i proceeded with my Kirisame. After two hours the schock still wasnt set. While looking at the breaking point i was questioning my sanity,. Maybe i misshandled the knife. So I took some pictures and send them to Kurt to ask what could have happened here. not even 15 sec. after i send the pictures he asked me if i could send him my phone number so we could talk about what now. He was super chill about it, calmed me down and instantly offered me a replacement knife with his new S-Grind as compensation. So without thinking about it i agreed. Always wanted to try one but didnt know if it is the right time for a custom knife. I read some S-Grinds arent that great cutters since they start to thick behind the edge, so i was always a bit reserved about them.

____________________________________________________________________

So after a bit of wait, shortly after Knifeshow Austria he send me the knife and again it fully exceeded my expectations. He told me this wont be a workhorse this time and i fully agree.

But first an foremost *some specs*:

*Smith and sharpener: Kurt Glatt
*Steel: Tungsten-Carbon Steel
*Shape: Gyuto
*Grind: Convex with an S-Hook / S-Grind
*Handle: Bog Oak

*Length: (didnt measure but i guess 240mm ;P )
*Height: about 5.9 mm
*Taper: 3.8 / 3.0 / 0.2 mm
*Weight: 196 g

_____________________________________________________________________

*Ergonimic and FF:*

As always his knives are pretty well balanced and feels very comfortable in the hand. The knife balanaces itself just about 1 cm in front of the fingerchoil. The Bolster and the Bog Oak are very polished. No sharp edges, scratches, dents or unclean laquer work. Very clean.
The Spine is well rounded and polished. The knife itself and the edge are pretty straight.

The S-Grind isnt that well polished and you can see the etch work. But hey... its an replacement and the S-Grind was put on extra. In the end it is a tool and i honestly dont care that much. The fingerchoil isnt that well polished this time. It doesnt cut into my fingers. Pretty sure its from the afterwork as well, so no hard feelings.

All in all i still think its still pretty solid.

_____________________________________________________________________

*Profile and Grind:*

As i know the profile can vary from knife to knife. My knife before was pretty aggressively rounded while this knife is way flatter. Doesnt have a full flatspot but still works pretty great for chopping. The higher heel feels not to high and seem to hit my max. sweetspot for edge height. The other knife made me feel a bit small some time and i think it wasnt reall that much higher. While chopping some onions the profile of the knife seems to work great for fine and fast cuts without cutting the root of the onions. While the Knife hits the cuttingboard "flat" on the board the tip is just high enough to cut the onion without severing the Root.

The Taper on the finely convex tapered Hira feels very smooth on push cuts and light chops. I honestly suck on pull cuts but it didnt really under perform here as well (as far as i can tell). While the S-Grind works wonders, the convexity feels smooth enough to just work on its own. I dont wanna swoon about the S-Grind and the foodrelease so i will upload a cutting video as well. Just to put my experience on the S-Grind in short words:

It works so great it actually feels ridiculous. Never experienced anything like this. The S-Grind or S-Hook makes the stick not stick before it sticks. Great! And you dont feel any resistance or miss alignements of the cut one sided "C" on the grind.

_____________________________________________________________________

*Steel*:

I presume this knife is made from the Steel as the knife before. The first thing i did with this knife were julienne some onions (2,8 Kg) to make some Onion Tarts for a friends birthday. Easy work. The Patina it created had a really dark and deep Blue which isnt really shown on the pictures. The S-Grinds kind of blocks the light for a solid shot so i have to say the pictures are a solid understatement. After 30min of trying to find a good angle i gave up... So after about 2 Weeks of use, the knife still feels sharp and the edge still catches paprika skin with ease. Tomatoes are a different thing, but i guess it will soon be time to strop.

_____________________________________________________________________

*All in All*

I really dont use any other knife at this point. Wanted an easy to maintaine stainless laser and bought an Enjiki - SG2 Gyuto. Now this knife took all of the fun out of it Which sucks because now i have to let this go... The only other knife i really grab right now are my enjiki 240mm a#2 extra tall and my Kirisame. Some times my Hado Gin. Santoku but thats about it. This thing became my undisputed daily. It cuts like driving a MX-5 on a clear, early autumn, sunday morning on a serpentine road. Nothing more to say.

Massive thanks to Kurt Glatt for being such a cool and approachable guy. And for letting me experience one of his S-Grind on a replacement.

~SmokeyRiceBallz (Michael)


r/TrueChefKnives • • 6h ago

Question Shindo check - is this fine?

Thumbnail
imgur.com
2 Upvotes

r/TrueChefKnives • • 8h ago

Thoughts on this knife?

Thumbnail
japaneseknifeimports.com
3 Upvotes

Only one review on JKI and no notes such as where in Japan this is made. Choil shot looks like double bevel 50/50 grind but the listing doesn't specifically say. Went looking for the website and found this

https://www.toki.tokyo/shop/knives

but I'm skeptical that this is the same knife maker because it doesn't list any gyutos that I could find. Anyone have this knife or anything from Toki? And what do y'all think? Thanks.


r/TrueChefKnives • • 11h ago

Cutting video Quick cutting video of the Yanyi Blue 1 wrought iron Kitaeji

28 Upvotes

I promised to someone on my last post to upload a cutting video, so here it is.

The first part of the video (carrot) was my first cut with the knife. The potato part I took only yesterday as I don't cook potatoes very often.

Turns out the coating, which doesn't come off at all, does affect the performance a little bit. On starchy potatoes I can feel the drag and sticking. The geometry works great on separating the food, but the stickiness hold it back. I don't feel that problem on other produce


r/TrueChefKnives • • 12h ago

Best way to restore?

Thumbnail
gallery
5 Upvotes

As far as the shape and sharpening which Im completely fine with as I have done it before, what can I do to this one to make it look a bit better?

Its a friend in her 70s and its been hers and her mother’s for a while, just wanted to get it a but freshened up for her.
Thanks in advance for any suggestions


r/TrueChefKnives • • 14h ago

Question Nakiri

3 Upvotes

Hey TCK! I wanted to get some recommendations on nakiris. With a few parameters.

I have two nakirs, one is a Mazaki Kurouchi Shirogomi #2 Nakiri 190mm, the other is a Shindo Srk8 Nakiri 165mm

I love them both but looking for something different that’s more lasery and lighter preferably with no Kurouchi finish.

I’d like the edge length to be greater than 165mm and again definitely looking for laser and more performance focused. Based in the US and looking to spend around $250-$300

Thanks in advance!


r/TrueChefKnives • • 15h ago

Looking for 165mm thin convex/laser grind Santoku recs

0 Upvotes

Hey everyone! 👋

I’ve been loving my Santoku, but I think it’s finally time for an upgrade! I’d love to hear what you all are using.

I’m really hoping to find something with a super thin grind and no Damascus, but beyond that, I’m totally open to suggestions. I actually just tried out a Shibata Koutetsu Santoku—the profile was a little too flat for me, but otherwise it’s exactly the kind of knife I’m looking for! 😂

If anyone has any recommendations (or even better, a link to one in stock), I’d be so grateful. Thanks so much in advance!


r/TrueChefKnives • • 15h ago

Looking for 165mm thin convex/laser grind Santoku recs

1 Upvotes

Hey everyone! 👋

I’ve been loving my Santoku, but I think it’s finally time for an upgrade! I’d love to hear what you all are using.

I’m really hoping to find something with a super thin grind and no Damascus, but beyond that, I’m totally open to suggestions. I actually just tried out a Shibata Koutetsu Santoku—the profile was a little too flat for me, but otherwise it’s exactly the kind of knife I’m looking for! 😂

If anyone has any recommendations (or even better, a link to one in stock), I’d be so grateful. Thanks so much in advance!


r/TrueChefKnives • • 20h ago

Bought 4 knives + a stone on Kappabashi (¥110k total)

Thumbnail
gallery
10 Upvotes

Hello everyone!

I'm visiting Tokyo and wanted to buy Japanese knives while I was here. I went to Kappabashi doing my best to avoid tourist traps and tourist pricing.

I went in wanting to purchase one gyuto, but the more I handled the knives, the more I wanted to make more purchases. Especially since I’ve been using a $150 Zwilling set for the last 10 years.

I bought everything at a shop called Shoushidou on November 21st 2026.

I would love opinions on the prices and quality.

I’m Italian and a decent cook. Most of my dishes include vegetables (onions, celery, carrots, bell peppers, etc) and some type of meat (beef or chicken).

Prices below are tax-inclusive. I will claim the tax back at the airport, for a total of then ~¥100k.

1. Sakai Takayuki VG-10 wa-gyuto, 210mm, ¥28,600. The box and blade both say Sakai Takayuki, and the blade is stamped VG-10. It has a hammered finish and an octagonal ebony handle.

2. Kiwami (貴和美) VG10 damascus gyuto, 195mm, ¥26,400. The blade is engraved 合羽橋 貴和美 ("Kappabashi Kiwami"), so it looks like the shop's house label, and the maker isn't named. It has a decorative damascus pattern over a VG10 core, with a dark wood handle, a red spacer and buffalo horn. This is the lightest knife I've ever handled. I plan to use it as my everyday knife.

3. Kiwami kurouchi white #2 (shirogami) bunka, 190mm, ¥24,200. The receipt lists it as kurouchi white #2 steel with a maple and buffalo horn octagonal handle. The blade is engraved with the Kiwami name but isn't stamped with the steel type, so I'm relying on the shop's word for that.

4. Kiwami kurouchi blue #1 (aogami) petty, 150mm, ¥23,320. The receipt lists it as kurouchi blue #1 steel with a burnt-lacquer octagonal handle. The same caveat applies, the blade isn't stamped with the steel.

5. Kai Seki Magoroku combination whetstone, #1000/#4000, ¥7,700. This is for sharpening the knives later. I know I definitely overpaid on this one, as Amazon Japan lists it for ¥3300.

I was able to test all knives at the store. They are all incredibly sharp, and all felt very high quality and balanced.

Are these fair prices for what they are? Any red flags on the knives or the shop? Photos are attached. Thank you!


r/TrueChefKnives • • 22h ago

State of the collection I Love a Good Western

Post image
59 Upvotes

Any fans of westerns?

In order:

Full polish soft iron Yanick

KU wrought yanick

Krichbaum S grind dama/apex KU

Isasmedjan Damacore

Newham K390

HSC Magnamax


r/TrueChefKnives • • 23h ago

Help Identifying what type of knife this is.

Thumbnail
gallery
2 Upvotes

Hi all. I bought this knife for my dad when I was in Japan a few years ago, I know it is an Aritsugu but for the life I cannot remember what type of knife it is, and searching isn't giving much help. I thought it was a Sujihiki, but when researching how to properly sharpen it, I realized it only has one sharpened side. That threw me off, so then I thought it might be a Yanagiba, but the lack of a defined Shinogi line and flat back made me think it can't be that either. Is it just a Sujihiki knife that is very poorly/improperly sharpened?

The last photo is the blunted tip that made me start researching how to sharpen it in the first place, so any tips there would be appreciated too.


r/TrueChefKnives • • 1d ago

52100 8" All Purpose Cleaver

29 Upvotes

Just finished up this commission of one of my Honos blades and thought I'd share here as well. Feel free to ask any questions about this one, my other knives or my process.

Edge profile is mostly flat with a gentle belly at in the front 1/3 to accommodate some rock chopping - similar to a lot of Gyutos or Santokus.

Was taken to a near zero grind with very slight convexity. Then I put the edge on with stones - Shapton Pro - 120, 1000, 2000, Morehei 4k & 0.5 micron Diamond stop. It is hair popping.

There is some convexity forged into the blade as well to aid in cutting performance and food release (thickest point is about 1/3 the way down from the spine (about 0.015" thicker than the spine here).

Handle is Thuya wood burl with buffalo horn ferrule - treated with 2 coats of Tried and True original finish.

Measurements:

52100 steel

Heat Treated to a 62-63HRC target, verified with files.

Edge length - 214mm

Height at heel - 85mm

Height at tip -63mm

Full distal taper

Spine thickness:

\- @heel - 0.20"

\- @tip - 0.048"

12mm behind the edge - taper from 0.040" at heel to 0.031" at tip

3mm behind the edge - 0.012" at the heel to 0.010" @ the tip


r/TrueChefKnives • • 1d ago

Looking for a little advice on a super small chip on my favorite honyaki.

Thumbnail
gallery
8 Upvotes

This is one of my favorite possessions, a Togashi white #2 sharpened by Hirotsugu Tosa
and I use it all the time. I’ve recently noticed a super fine chip at the edge- hardly noticeable unless you look very closely and with the magnification of the phone, I’ve shown the chip here. There’s no effect on performance, which is outstanding, but it just hurts my heart a little bit. I think the right thing to do is nothing until it eventually needs sharpening, but wanted some other opinions about whether or not I should intervene early and if so, should I sharpen myself with moderate experience or should I get it taken care of professionally? If I get it fixed, I just want to address the edge and not Tosa’s geometry, if I leave it, I know that his masterwork remains intact.


r/TrueChefKnives • • 1d ago

Knife for around $100

0 Upvotes

I was trying to get a good knife for my father for Christmas and wasn't really sure what to pick. He cooks pretty often and cooks all sort of things(a variety of different fruits, vegetables, and meats). He uses random knives you can get from any retail store so just about any quality knife would be better than what he's already using right now. I wanted to get him on knife that he would be able to use often.

Here is what I'm picking from, feel free to recommend any other better options as well

KC-702 8.30"

https://kanetsuneusa.com/kc-702-high-carbon-steel-210mm-gyutou-kitchen-cutlery-chef-knife/

Enso Ginsan 8.25"

https://cutleryandmore.com/products/enso-ginsan-chefs-knife-42405?variant=47811869868286&absrc=Google&abid=779976600364&abcampid=21454933374&abgroupid=190804420681&abkwdid=pla-490175670232

Masutani VG10 Damascus Nashiji 7"

https://cutleryandmore.com/products/masutani-vg10-damascus-nashiji-gyuto-red-handle-42732?variant=48227788783870&absrc=Google&abid=779976600364&abcampid=21454933374&abgroupid=190804420681&abkwdid=pla-490175670232

Enso Hizashi 8"

https://cutleryandmore.com/products/enso-hizashi-chefs-knife-40181?variant=43887880503550&absrc=Google&abid=704625738445&abcampid=21439325014&abgroupid=164717859352&abkwdid=pla-2401421420365

Sakai Takayuki VG10

https://www.hocho-knife.com/sakai-takayuki-17-layer-vg10-damascus-hammered-blk-japanese-chefs-gyuto-knife-210mm-with-black-laminated-wood-handle/


r/TrueChefKnives • • 1d ago

NKD - Munetoshi 210 tsuchime and a question

Post image
18 Upvotes

Hi everyone 👋

So after reading a lot of good things about Munetoshi I got tempted to buy one of knives and tools (great price at the moment).

It just arrived so haven't used it yet, it looks great and I'm really looking forward to it!

I just have one concern and I figured this is the place to get some advice.

I noticed it has some flex to it.. more than I expected from a maker that is praised for robustness.

I compared it to my 240 Wakui and it seems to have more.

Is it really something to be concerned about? Or are his blades like that?

Should I return it?

Thanks!


r/TrueChefKnives • • 1d ago

NKD - Ittosai Kotetsu Swedish Steel

Post image
16 Upvotes

I made a post on the BST recently wanting to buy a 240 Swedish steel Ashi. A very kind member on here let me know about this blade from Ittosai Kotetsu that they believed to be made by Ashi. After chatting with another member who was also all but certain it was an Ashi blade, I placed an order. I was still a tiny bit skeptical since I couldn’t find any info about it online, but ultimately trusted the folks who are much more knowledgeable than me.

Now that I’ve received the blade, I’m glad I listened! This blade performs wonderfully, and I’m very happy to add it to the rotation. Planning to put it through its paces for Thanksgiving prep, which will be a fun way to get acquainted with it!