r/UAVmapping • u/WesternShot5763 • 2d ago
I’ve been working on a project called DeepForestry (deepforestry.com) and just pushed the new site live.
r/UAVmapping • u/WesternShot5763 • 2d ago
r/UAVmapping • u/Bright-Young-800 • 2d ago
The ROCK R3 PRO V2 is a professional 3-in-1 mapping system featuring 32 laser channels, 1.28 million points per second, a 26MP RGP camera, and a hybrid GPS-SLAM engine. It delivers survey grade accuracy across aerial, vehicle mobile, and handheld deployments.
The ROCK R3 PRO V2 combined with the ROCK Colorized SLAM Dock V2 transforms the survey-grade aerial LiDAR sensor into a versitile handheld or mobile mapping solutions. This setup enables precise 3D data capture in GPS-denied areas, corridors, and underpasses by merging laser scans with 6K 360° photo spheres from an integrated Insta360 camera.
Motivated seller, open to offers within reason. This system is very lightly used and always stored and handled with care. Almost new condition.
Reach out with your number. Ask for Jake (jakobsuave@gmail.com)
Vehicle mount also available upon request. Hitch mounted boom system with quick attach R3 Pro + SLAM dock mount, elevated 2m off road - photos upon request.
Will need Software Licence from Rock Robotics to process data. The Rock also offers data processing on their ROCK Cloud.
Will also need Android tablet for SLAM scanning. Also available for sale upon request.
Whats included:
Rock Robotic R3 PRO V2 LiDAR Scanner
26MP RGB Modular Camera
DJI Skyport adapter
GPS Antenna Mast (compatible with M300/M350)
4x 256GB Samsung USB 3.1 drive
Manual and documentation
Microfiber lens cloth
Rock Robotic SLAM Dock V2 mount
Insta360 mounting bracket
Insta360 1RS Camera
95Wh Rock Robotic USB Power Pack
Power Pack Shoulder Strap
Power Pack charging block and cable
GPS Antenna
GPS cable, power cable, and camera power cable
Extendable handheld carry pole
2x pelican style hard cases
Microfiber cloth
For a comprehensive specification sheet, see screenshots in photos.
r/UAVmapping • u/Few_Relationship7876 • 3d ago
I'm currently developing out a platform that helps convert point clouds from LiDAR or photogrammetry into mesh models with segmented ground, trees, buildings, etc. Does anyone know of a place to find aerial scans to test with?
There is a lot of national public information but I want to also test it on 'real' project data with varied capture quality. Any suggestions?
Thanks!
r/UAVmapping • u/ovoid709 • 3d ago
My org has recently purchased a DJI M400 and L3. The L3 requires a heavier duty gimbal on the front port. That gimbal isn't compatible with the P1 or H30T. When we connect to the rear port Pilot 2 kicks up a huge stink about it not being recommended for those sensors. It seems like DJI wants us to change the front gimbal in the field to use the other sensors, but that seems insane to me. Am I missing something? I'd love some advice on this.
r/UAVmapping • u/chirver • 3d ago
r/UAVmapping • u/ZoMgPwNaGe • 3d ago
Nearly 2400 image orthomosaic drone map created with Nova in 7 minutes. The preview was available even faster. This was mapped out using the DJI Mavic 3T.
More than happy to answer any questions :)
r/UAVmapping • u/ScarlyLamorna • 4d ago
Hi folks
For a dissertation project I need some multispectral drone imagery. Specifically, I need the following:
Can anyone recommend any data sources? I am happy to pay a fee if anything is highly recommended!
Thanks in advance!
r/UAVmapping • u/CaddyShack_42 • 4d ago
If you're tired of juggling folders, drone images, maps, 3D models, and different software just to manage your projects, I built something worth checking out.
I have been working on this project for my myself for over a year. I have been using it in production for about half that. Plenty of work to still be done for features and making it the all around platform for everything drone business related.
Drone Data Command (DDC) brings your drone project data together in one platform.
DDC is built for drone operators, inspection professionals, mapping teams, and businesses that work with aerial data.
Give it try, you might like it.
#DroneDataCommand #DroneMapping #DroneSoftware #Photogrammetry #DroneInspection
r/UAVmapping • u/Night_Hawk_99 • 4d ago
r/UAVmapping • u/Low-Cloud3452 • 5d ago
Devo iniziare a fare mappature Multispettrali da portare su dji Terra ho un M3M mi servono sia come mappe di prescrizione sia come rotte per un Agras T100 ho antenna RTK3 quali.impostazioni devo mettere sul radiocomando per fare una perfetta mappatura del campo e una perfetta pianificazione di volo per l'agras T100? Grazie per l' aiuto
r/UAVmapping • u/EcoSal • 6d ago
r/UAVmapping • u/Just-Stop-2351 • 6d ago
r/UAVmapping • u/dec0nstruct0r • 6d ago
The DJI Mavic 3M has 4 multispectral cameras that are not (absolutely) calibrated and a 20MP RGB camera.
I built a tool to preprocess the Mavic 3M images to:
a) calibrate the images by using reflectance panels
b) use the RGB image to pansharpen the multispectral images.
This allows you to create 7-channel orthophotos (3xRGB + 4xMS).
For the reflectance panels you can use:
a) one image of a single panel with a single surface
b) multiple images of a panel taken at different times (pre/post flight); the correction factor is then interpolated based on the time-stamp in the images
c) one/multiple images of reflectance panels with multiple surfaces (multiple "shades of grey")
The tool can be used as stand-alone app or as WebODM plugin.
If anybody wants to test it I would be happy about feedback. =)
r/UAVmapping • u/mehdi-33 • 7d ago
A gimbal-stabilized fixed-wing drone I'm developing for my master's thesis. It is bungee-launched and designed for aerial surveillance, with an onboard computer running computer vision algorithms for target detection and tracking.
r/UAVmapping • u/Broad-Ad3990 • 7d ago
How would it be possible to pull that off?
I work in wind farm industry in Canada.
We usually have a survey crew on site full time to measure topo shots and follow progress of road excavation, rock blasting, stake out alignments, etc. Its a lot of driving for them.
Our project is about 20km x 40km in mountains, no airport, on-site camp for workers with over 120km of roads to build, excavate, rock blasting, etc.
I'm thinking about this idea to secure one M400 docking in the middle of the site with a proper RTK base. The M400 would have Zen Muse L3 and would be mostly use as a work horse for LiDAR survey 2-3x/week or even more, for quantities and progress tracking. The survey team would focus on placing targets or even just stakes out, depending on the accuracy without GCPs, and my iea is to fully control and plan flight mission remotely.
We would fly at 60m-100m.
The M400 has the ADS-B in for detection of incoming plane or helicopter, and it would be possible to install both a parachute and L3.
Communication might be an issue, since its so remote there are no 5G or LTE or cellular - Maybe just a Starlink connection, that I need to figure out.
From a survey standpoint, having the abilities to capture Lidar data as required, remotely, would be a game changer. Maybe this set up could even replace the need for 1 surveyor $$$.
If the M400 would need emergency landing, I could have direct contact with a surveyor or people on site to safely secure the drone once it lands.
There is one company selling Docking for M400. It might just be possible technically, but legally??
Thank you all,
Let me know if this idea is too crazy
r/UAVmapping • u/Annwithchooks • 9d ago
Okay, so I’ve just bought a DJI mini 4 pro with RC2 controller. It’s my first drone and tbh I’m not very tech savvy. I have recently bought a rural property (Victoria, Australia) that has no internet/mobile reception.
I’d like to do an orthomosaic of it so I can plan fencing and dams etc. It’s 44 acres, however satellite imagery and all other maps do not line up (cadastral survey hasn’t been done since 1800s, neighbours are pine plantations and state forest) so I will need to program the drone to fly over a slightly larger area to ensure I get the boundaries.
I tried using ymapper and used ChatGPT (I know…) to instruct me to put the map on the controller - the only instructions ymapper had was for using iOS or android, not windows. I broke the property down into 4 sections, but apparently it has more than 200 waypoints so it won’t do it.
I honestly don’t know what I’m doing. I live over 2 hours away from the property so I need to prepare everything I can remotely before heading out.
I’ll be using my laptop (16GB RAM) to run whatever 3rd party programs are needed, and storing all files on an external harddrive.
I really need the “for dummies” guide on how to do what I need.
How do I work out how many waypoints are on the polygon map? Is there something better than ymapper? I can’t afford paid programs as I’ve really stretched the budget to get this drone.
The terrain is very hilly, with several gullies. About 50m difference between lowest to highest point. There are also mature gum trees, approximately 20m high.
r/UAVmapping • u/Own_Medium_3805 • 10d ago
For line-of-sight work I use free global terrain tiles (AWS Terrain Tiles), and I wanted real error numbers instead of the nominal resolution. I compared them with an independent elevation model at 251 points in 51 countries, airfields and mountain sites in 18 regions, split by slope:
On the 100 airfields, going from a 100 m grid to a 10 m grid did not improve the agreement: the source is coarser than that in most places. The worst airfield point was an error in the published airfield height, not in the tiles. These are surface heights without trees or buildings, so a drone flying over canopy sees something different. I use this inside a radar coverage tool I built (CoverScope).
Edit: the reference was SRTM 30 m plus published airfield heights. The tiles share SRTM in part of the world, so these numbers show the tiles are read correctly, not accuracy against bare-earth lidar. See comments.
r/UAVmapping • u/OldDance7809 • 11d ago
r/UAVmapping • u/ftopo • 12d ago
Hi
Just want to share this very good plugin
Enjoy
r/UAVmapping • u/cmcarman • 13d ago
Hey there! I’m needing to take my DJI Matrice 350 RTK drone with the L2 LiDAR attached up to Canada (from the US) to document some sections of BC northeast of Vancouver.
I heard a rumor that I may need to do something (paperwork?) to bring the LiDAR across the border beforehand, is that true?
r/UAVmapping • u/Ronald_PY • 14d ago
Hey all, we're doing test flights with our new M400 + L3 and ran into something weird when resuming missions
Setup: M400 + Zenmuse L3, RC Plus 2, DJI Pilot 2, D-RTK 3
Area route, about 32 min:
- Try 1: at around 20% battery we RTH'd on purpose to test battery swaps. Hot-swapped in ~10 s (way under the 45 s window). Everything looked fine until we tried to resume. Then a bunch of warnings popped up (LiDAR dirty, sensors not calibrated, can't take off...), and hitting Start on the checklist ends with "command timed out (-5)". The app's in Spanish, so the English text may differ.
- Try 2: low-battery auto RTH with ~20% of the route left. This time we fully powered off, swapped and powered back on. Same thing.
- Then we took off manually, hovered at 50 m and tried to resume from the air. Same timeout, and it told us to land.
- Rebooted and started a brand new mission: flew start to finish, zero issues
So the drone and the L3 seem fine, it's just resuming that breaks.
A few questions:
Thanks!
Translated with AI 😵
r/UAVmapping • u/inkedflight • 14d ago
Got tired of holding the controller through long mapping flights, and it's not getting any warmer, so I finally made a tripod mount for it. Been meaning to for over a year. Arca base, it prints in PETG without supports.
Download + instructions: https://alos.no/en/resources/dji-rc-plus-2-tripod-adapter