r/Vise • • Oct 18 '21

Vise Discussion

8 Upvotes

Let your vise out.


r/Vise • • 2d ago

Building My Own Bullet Vise from Scratch

Thumbnail
gallery
49 Upvotes

What do you guys think? I'd really appreciate any advice or suggestions on details I might be overlooking.

During assembly, I individually fine-tune and fit every component. Each vise is carefully hand-adjusted to ensure the best possible fit between all the parts and smooth operation.

This process is very time-consuming, but I don't want to compromise on quality.

I'd love to hear your thoughts, suggestions, or any details you think I should pay more attention to. I'm always looking to improve.


r/Vise • • 2d ago

Info on this Craftsman vise?

Thumbnail
gallery
48 Upvotes

This Vise belonged to my father. I recently found it in our storage unit. I’m wondering if anyone knows when it was made and the estimated value of it?


r/Vise • • 3d ago

Found vises, anything particularly special?

Thumbnail
gallery
36 Upvotes

Hi all, found these vises going through all the stuff left behind when we bought our farm (not euphemistically). Unless there is something that would be better to leave original, I plan to clean them up (assume sandblasting etc is best) and get them back in service.

Looks like:

Littlestown no. 300 (missing swivel base?)

Craftsman 5176 (I love the crank details on this vise!)

Craftsman 506 (good shape, using this on a bench at the moment)


r/Vise • • 3d ago

My vice is having a hard time gripping my material, any suggestions?

Post image
7 Upvotes

I’m trying to grind my parts but I can’t get it to grip my material evenly, any help would be appreciated.


r/Vise • • 4d ago

Mechanic 600

Post image
36 Upvotes

Picked this up an estate sale. Seems pretty rugged. Not sure of the maker


r/Vise • • 4d ago

Thoughts on this pivot vise?

Thumbnail
gallery
14 Upvotes

It's been sitting for a while at the local "old stuff barn". Might grab it this weekend if the price is right.


r/Vise • • 6d ago

Where to buy trapezoidal 1.25"-3TPI threaded Rod?

Thumbnail
gallery
17 Upvotes

As title says, ihave tried contacting a local machinist, lathe wont cut it, tried flea market, no luck, classified, no luck, mcmaster carr, no luck... am i SOL?


r/Vise • • 6d ago

Rusty vise project update

Thumbnail gallery
9 Upvotes

r/Vise • • 6d ago

Vise swivel help

Thumbnail gallery
8 Upvotes

r/Vise • • 6d ago

Vise identification

Thumbnail gallery
3 Upvotes

r/Vise • • 7d ago

Making a Criss Cross – A Workbench Project

Thumbnail
gallery
10 Upvotes

A few photos from my Criss Cross workbench vise project.

Following Part 1, which showed the fabrication of the mechanism, Part 2 covers its installation and all the details of this next step.

You can find the full story and all the details in my Part 2 post just below!


r/Vise • • 7d ago

Making a Criss Cross – A Workbench Project (Part 2: Installation)

4 Upvotes

Making a Criss Cross – A Workbench Project (Part 2: Installation)

Following Part 1, where I showed the design and fabrication of the Criss Cross mechanism for my workbench vise, it's now time to move on to the installation.

After making all the components myself in my workshop, this is the next step: fitting the mechanism and bringing the project closer to completion.

A continuation of the build, from fabrication to installation!

Part 1 – Fabrication:
https://youtu.be/EAR-95Q6ssc

Part 2 – Installation:
https://youtu.be/giuUu1po8ZU


r/Vise • • 9d ago

Hollands 164 1/2 Coach Makers woodworking vise

Thumbnail
gallery
51 Upvotes

Picked this up, fully refurbished, for 100 bucks. Very stoked


r/Vise • • 9d ago

How to finish this vice handle?

Thumbnail gallery
7 Upvotes

r/Vise • • 10d ago

Making a Criss Cross – A Workbench Project (Part 1)

Post image
6 Upvotes

First step in a workshop project: building a Criss Cross mechanism for my workbench vise.

I made this entire system myself, from design to construction, right in my workshop.

If you'd like to see how I made it, here's the link to the full video:

https://youtu.be/EAR-95Q6ssc

To be continued in Part 2!


r/Vise • • 11d ago

Brought it back to life

Thumbnail
gallery
90 Upvotes

After hunting for parts that worked finally got around to bringing this Duracraft 5 back to the land of the living. I know the color is wrong but it was the closest rattle can I could find.


r/Vise • • 12d ago

Help w Anvil/vise info hunt

Thumbnail
gallery
10 Upvotes

Hello! I recently got this anvil/vise combo that is missing its clampy part, i want to fabricate the missing part but could not find any picture of the clampy part to help me, anyone got any idea what the maker is or the name to help my search? Thank you!!!


r/Vise • • 12d ago

Can anyone date this one or any information?

6 Upvotes

Can anyone id this one? I know, the paint job right? But I just found it! Says Adams Co. Dubuque Iowa. Other side says Adams Co the Diamond vise. Pat. Jan.1895.


r/Vise • • 13d ago

Anatomy of my shopmade Hi-Vise

20 Upvotes

r/Vise • • 15d ago

Making progress, any help with ID or history of this one? Found in France.

Thumbnail
gallery
33 Upvotes

Started out pretty rough!


r/Vise • • 19d ago

Machining bench vise castings

Thumbnail
gallery
73 Upvotes

I made completely new molds to reproduce the external design of the Wilton vise, but I use 42CrMo alloy steel for casting. I also redesigned the base with a 360-degree rotation mechanism.

I'm a DIY enthusiast who enjoys modifying, redesigning, and improving existing tools and machinery. I like experimenting with new ideas and finding ways to make things better.


r/Vise • • 19d ago

Bench vise 143lb

3 Upvotes

I need a bench vise of 143lb of weight, i dont care if is rusty or old, i need a heavy beast, Hope to find It because the only few i finded we're priced like 1.000$, and i dont have so much.

Someone help me, i'll give him a beer


r/Vise • • 20d ago

Got this Reed 204 1/2 for only $20. Should be a fun restoration challenge since it's completely froze up.

Thumbnail
gallery
62 Upvotes

I recently got a 205 that was in a little bit worse shape than this one working as smooth as butter, so hopefully this one won't give me too much trouble.


r/Vise • • 20d ago

My buddy gave me a Wilton.

Thumbnail
gallery
72 Upvotes

I have no idea how to identify it. I removed the slide and there are no numbers anywhere, other than casting numbers I believe. It's mostly functional, I just have to remove it from the stand and reinstall the tension bolt.