r/boating • u/Ok_Librarian_4298 • 17m ago
r/boating • u/ExitPlanMadness • 15h ago
2023 Honda 115 outboard sat for 1.5 years
How risky is it running for a calm river cruise for a few hours before servicing?
chatgpt is acting like the world will explode if I dont change impeller First.
it’s sat for 1.5 years and was last serviced at 20 hours in 2024. It’s currently 80 hours.
surely it will be fine since it’s so new.
Thoughts?
edit: the fuel was emptied before it sat as well. So no fuel issues.
im going to get it serviced but want to take the wife out tomorrow before she leaves for a few months for work.
cant get it serviced until next week Due to wait times.
r/boating • u/Ancient-Key4896 • 13h ago
What boat was this? And how can I find more info on it? (Long Island NY)
I saw this boat on the way to school every single day for years and I’ve always wanted to figure more out about it, I know there’s no way to search via reg. I know Concorde or Owens-Concorde made boats back around the time this would have been made, I want to say it’s around 25-30 feet long but I’m not sure so I don’t want to go off of that alone. Any insight would be appreciated.
(I’ve already posted about this boat in the past and if that’s not allowed feel free to let me know and the post will be taken down)
r/boating • u/Particular-Soft-6112 • 1d ago
Am I in the wrong?
So a little context here, 15yo, 16ft Lund deep v, and I fish the missipi river pool 7 up in Wisconsin. If you know anything about the missipi, in a lot of the back channels there’s not room for boats to give shore fisherman much room. So I was trying to cross this little canal,Chanel that’s about 15 feet wide to get to a deeper much larger gravel pit. Only way to get there is through this channel. There was a bank fisherman fishing the channel and he already seemed pissed as I was going through. Than just as I was about to pass him(I was going maybe 5mph, channel is very shallow) he cast his line right in front of my boat. He then tells me that I should have turned around when I saw him and that I had all that other water to fish. I told him im sorry but this is the only way through. After untangling his line from my trolling motor, walked off and called me a f********* asshole. Honestly was kinda shocked at the interaction and wondering if I am in the wrong.
r/boating • u/Valuable-Republic546 • 14h ago
Tritoon cover
So I bought a 2024 2585 LSZ Avalon with extended rear deck. I can't seem to find any boat covers that cover the from the front deck to the back deck. Any help would be appreciated
r/boating • u/BumblebeeBig7507 • 1d ago
Is this cable or starter?
Batteries test good but voltage dropping during start and just duds out. Is the starter cooked?
r/boating • u/canalboaty • 2d ago
My canal boat inside Erie Canal Lock 17
This was the deepest lock of the Erie Canal with a guillotine style door
r/boating • u/Ill-Attitude-6355 • 1d ago
Inside a bilge float switch
Corroded Rule, boat sits dry docked on a trailer.
r/boating • u/Duece_29 • 1d ago
Motor rpm/prop
A couple months ago I posted about my RPMs seeming low at full throttle and trimmed out. When trimmed into the sweet spot for best speed I’m running 5,300 rpm’s. The motor is a 2025 Mercury 150 four-stroke. On the plate on the motor it says wide open throttle 5,800. While it was at the shop for fluid changes and winterization they ran a scan for hours in each rpm range. Attached is what it showed. Any suggestions on making a change to get the most out of the motor would be appreciated.
r/boating • u/explosivetortugaguy • 1d ago
Orphaned or Foreign boats?
So I’m in the market for an express cruiser boat for the family, 28-35 footer for cruising, hanging out at the dock and maybe overnight island run.
Boat would be slipped (west coast 24/7 sunshine) so V or direct drives only.
Ideally I’d like diesel motors but it’s hard to find. I did find a Cranchi boat but they don’t seem to have any presence therefore support in the US. They are still around in Europe but is it generally not wise to get a foreign boat or orphaned boat?
Any mechs here have a recommendation as far as a boat that fits the bill? Thanks.
r/boating • u/DrBendovaa • 2d ago
Buying this boat advice
I'm looking at this boat to buy, the current honour says this repair was made by the old owner of the boat. Looks like he painted with some thick pain over the original paint of the boat and now everything is cracking, it is just like 1 meter that is painted like this and this is the worst side, there is the same thing on the other side as well but a lot less and looks way better.
Is this a concern?
Does it looks like to be just the new paint peeling and cracking off due to a poor job?
Is this still a buy and I fix it afterwords?
r/boating • u/DrBendovaa • 2d ago
Engine bolt to tigh
I'm looking at this boas to buy, looks like this engine screw was tightened too much, the one on the other side is perfectly fine.
Is this still a safe buy? Do I need to take immediate action and repair this?
r/boating • u/enmoiallhy • 2d ago
buying a used boat that is already winterized
my husband and I are looking to get into boating and want to get a cheap older boat for our starter boat just to use on our local lake.
we found a 2000 stingray 190FX for sale for $3000, the only issue is it has already been winterized so the engine cannot be turned over.
is there any way to check if this boat is good to buy, or do we need to pause our search until spring?
r/boating • u/SecretFishShhh • 2d ago
LiFePO4 and Rotax 1503 250HP - compatible?
Hey folks, I can’t find anything about LiFePO4 and Rotax 1503/inboard compatibility.
Has anyone had success?
I’m aware of the difference between LiFePO4 and lead-acid batteries and the importance of a quality BMS with right parameters, but I’m shocked there isn’t more info about them online.
A few LiFePO4 manuals I’ve read explicitly state “outboard” with respect to their marine application and I’m curious if that’s intentional?
Any insight is much appreciated.
r/boating • u/Boeing-B-47stratojet • 2d ago
How did this (1) become the riverboat in public consciousness, when most looked more like these(2-5)?
galleryr/boating • u/PianoRevolutionary12 • 2d ago
thinking of buying a steel hull boat. yes no maybe?
17ft steel outboard motor boat. I like the idea of steel, instead of fibreglass, why is that a good or bad idea? it has all these bumps on the hull, is that from....bumping stuff? Or is there something bad I should be looking for
Pros, can weld on a new piece of steel if needed? Mount stuff to the sidewalls? Drive right onto the beach and who gives a shit
Cons, I will be a lightning rod in the rain storm? Surely no more risk than when I owned a sailboat? Rusting?
r/boating • u/Who8088 • 2d ago
How do you guys winterize a boat!!!!
Hi, I just bought a 16 foot fishing boat and it came with a cover that's expensive and for my model boat. How should I winterize it? Should I buy some cheap cover for the winter off of Amazon and keep my good cover for my daily spring, summer ans fall stuff?
I plan on keeping it outside in my driveway.
r/boating • u/KingOfThe2-6 • 3d ago
Learning to boat
Just got a boat is there any good YouTube channels talking about how to safely drive in rivers and lakes and how to fish out of boats. Grew up bank fishing but never got to be out on the river myself. I have a 1760 John boat with a 50hp hand till engine if that helps.
r/boating • u/RickRubins • 3d ago
You wake up aboard your boat. What does your typical morning look like?
r/boating • u/fduszwm • 3d ago
Inflatable Boat Owners: What Do You Actually Use Yours For?
I've been curious about how people actually use their inflatable boats.
Some people use them mainly for fishing, while others take them out for relaxing weekends, exploring quiet lakes, or getting closer to shorelines that larger boats can't easily reach.
For those who own one, I'm curious:
- What do you mainly use your inflatable boat for?
- Where do you usually take it — lakes, rivers, or coastal waters?
- What's one thing you really like about owning an inflatable boat?
- Is there anything about it that you wish was better?
Would love to hear some real experiences from other owners!
r/boating • u/CPerks23 • 2d ago
Difference in drive shaft length
I’m replacing the lower unit on a older Yamaha 70hp got the correct part number the original was 6H3-45300-16-4D and the direct replacement is 6H3-45300-20-8D. The new one shows up and the drive shaft looks considerably longer. It says they are both supposed to be 20 inch’s new long shaft. Old one measures 18in new one 20in. Just a little confused Yamaha doesn’t even make a 18in. They both have the same number of spines.