r/bonecollecting
•
u/Irman_haris_art
•
8h ago
r/bonecollecting • u/firdahoe • Sep 12 '20
Advice Processing a Carcass 101 - the bones of bone collecting
Ok, so given how many comments we get requesting info on how to process a carcass, I figured it was time to update the stickie for this topic. Enjoy and, as always, feel free to comment and I will append this as needed. Just a reminder to A) always check your local and federal laws to make sure it is legal for you to possess parts of the animal, and B) if you are in an area prone to rabies or other diseases (rabbits and tularemia, armadillos and leprosy, etc), please take adequate precautions when handling dead animals, especially fresh carcasses. Always use gloves when handling a fresh carcass.
HOW TO PROCESS A CARCASS
There are generally three steps in the process of rendering a carcass down to a skeleton: 1) defleshing, 2) degreasing, 3) whitening. In general, these three steps are most effective when done sequentially. Two main things to remember during the process – Chlorine bleach should NEVER be used in any step of this process, and cooking bare bones will fix the grease and potentially cause long-term damage to the bones. Below are a few good guides for processing a carcass for you to take a look at.
http://www.jakes-bones.com/p/how-to-clean-animal-bones.html
http://baccyflap.com/txt/natmat/bones/
http://www.nara.accu.or.jp/img/elearning/2011/animal.pdf
http://bone-lust.blogspot.com/2015/05/bonelust-q-ive-been-macerating-bones.html
DEFLESHING
In general, the more flesh and skin that is removed, the faster the defleshing step is and the less smell you will have. Once you finish defleshing, you will want to pick clean any remaining soft tissue with tweezers, a scalpel, brush, etc before moving on to the degreasing step.
Open Air - This is easily the fastest method for defleshing. Using this method, you let the carcass rot naturally on the ground and let the flies and other insects work their magic. To do this technique, it is highly recommended that you use a locking cage to keep out scavengers that will be drawn to it. You simply put the carcass in the cage or fenced in area. You do not need to deflesh, skin, or gut the animal first for this to work, in fact the skin can help keep the moisture in. Sometimes it helps to poke a few extra holes for the maggots to get in. There are a few major drawbacks to this technique 1) the smell is awful and your neighbors will hate you, 2) you have to keep the carcass moist for the maggots to keep working, or you will end up with a mummified carcass, and 3) you will develop a fly problem. So, this is better done in a more warmer and more humid climate (doesn't work so well in a desert), and you only want to do this if you have adequate land and distance from your residence (and neighbors, think about your neighbors). Once the skeleton is reasonably clean, remove the bones and rinse them off.
Dermestids – great method if you have the ability to sustain a colony, and works well in the winter if you have a heated set-up. Rather than go through this process, here is a great link that goes over it. Be forewarned, dermestids will smell and do require you to keep feeding it as they are living creatures. If you do not properly ventilate, clean, or feed them, they will find a way to swarm out of their enclosure and I speak from personal experience when I say that you don’t want that to happen. Note that this is the only one of the defleshing techniques that will keep fish, birds, lizards, and small mammal skeletons somewhat intact. The other techniques mentioned below will result in disarticulation.
https://www.natsca.org/sites/default/files/publications/JoNSC-Vol7-Munoz-Saba_et_al_2020_0.pdf
Burying – this technique works best when you have a piece of property to do it on, have time, and can reasonably protect the carcass from scavengers. It also is the easiest for cleanup and has the least smell, and is a great method for when you are dealing with a whole carcass from a larger animal. This method also works with smaller animals, like rodents, if done in a flowerpot. You will still want to skin and deflesh as much as possible beforehand, and you’ll want to keep the soil slightly moist. With burying, there are two primary concerns: scavengers and loosing parts. To prevent scavenging, try to bury at least 2 ft (60 cm) deep (or deeper if sandy soils) and place larger rocks above the carcass to act as a barrier to digging. To prevent the loss of smaller elements, consider placing a wire mesh below the skeleton. The time it takes to decompose depends a lot on the local soil conditions (soil type, soil temperature, soil moisture, soil acidity), but will generally be several months for a larger carcass. I have heard of people adding bacteria (yeast) or compost to the carcass to help speed the process along. Oh, and one last helpful tip…place a clear marker over the pit so you can find it again when it is time.
Maceration – the smelliest method, but highly effective and you can use the same container the entire way through the process. You will want a large container with water, and a way to keep the water on the warmer side (over 70 F/21 C). If you can stomach it, stirring the pot every day will help with the maceration process. You will want to do pour-off’s (replacing the water) regularly initially as the water becomes too fouled (and to remove chunks of soft tissue that will invariable float around), and this is where the most offensive, gag-inducing, eye-watering, curse-laden part of the process will occur. But as the decomp gets farther along, do fewer pour offs. With each pour off, you are reducing the amount of bacteria for digesting the soft tissue. As long as there is plenty of food available, they will repopulate (try to leave some of the scum with each pour off to allow faster recovery of the bacterial population). If the water is allowed to get too cold, the decomposition process will stop and, even worse, you will convert the fats to adipocere (bone wax) which is very difficult to remove. Under ideal conditions, you can easily render a fleshed animal to bones in a few weeks using this method. You don’t necessarily need to deflesh for this technique to work (and I have found that having the bacteria from the stomach contents helped things along), but you do want to skin the animal. Stirring the mix also will aid in speeding up the process. If at all possible, try to keep the buckets out of direct sunlight to keep the algae from growing (I throw a tarp over my bins).
I am going to add in a caveat here since we see it so often - DO NOT ADD ANTIBACTERIAL DISH SOAP OR HYDROGEN PEROXIDE AT THIS STEP. You need bacteria to digest and break down the soft tissue. These two things make the environment hostile to bacteria causing it to take substantially longer to process. The only thing that you can add to help the process along is enzymatic detergent, which brings us to the next method.
Enzymatic Detergent Maceration - You also can add an enzymatic detergent (BIZ is one example) to the water to aid in the process. u/octane80808 has a great summary of the use of enzymatic detergents in the comments section that I have copied sections of here: "For anyone in Europe, we have enzyme-based washing powders [mod note - Biotex in Europe, powdered Biz w/out bleach in US]. I've been using it for years and I can't imagine it doing any other way. It's essentially an all-in-one method, as it dissolves the tissue, but also the fat, so it degreases at the same time. There's no need to whiten the bones afterwards, they come out perfectly clean (there is no bleach, or whitening agent present AFAIK, so it's all natural). The only downside is that any cartilage also dissolves. So for fish, birds, young animals, or small animals, you'll be spending an afternoon gluing the bones.
I also clean my skull manually during this process. Depending on how impatient I am, and how much free time I have, I take them out of the solution every day to every other day. I remove the tissue I can remove without disturbing the skull too much. And I refresh the solution. So a new spoonful of washing powder, and warm water. The latter also helps to speed up the process, as higher temperatures seem to be favourable. By refreshing the solution every day, I can usually clean a skull within one or two weeks...renewing the solution isn't necessary, it will just take a lot longer.
The washing powder is relatively cheap, and it comes in large boxes. You only have to use a teaspoon or tablespoon, depending on the size of the container/skull. So it lasts quite a long time as well..Note that the bone may feel soft after this step, especially if processing a bird or fish. It is better to allow the bone to dry before handling as this will re-harden the bone. Also, bones may turn black during this process if the water isn't changed regularly enough. Do not worry, you can treat this discoloration during the "Whitening" step."
Simmering/Cooking – this method ONLY should be used with larger animals, and can be effective when you have a carcass that is dehydrated jerky. The reason is that high heat will warp bones, and will fix the grease in the bones making step 2 (degreasing) incredibly difficult. Never use this step with birds, fish, and small mammals. To use the boiling method, you actually want your carcass to have flesh, but gutted, in order to protect the bones. Place the carcass into the boiling water and allow the water to return to a low simmer, then remove from heat. Leave the carcass in the water for only as long as it takes for the flesh to “cook” (if you are boiling for an hour, you have ruined the bones). Remove from water and the flesh should come off easily, although internal tissues (like the brain or inside the nose) will still be adhered. You can use a pressure washer or hose with a good nozzle to try and clean off the hard-to-reach areas. Be extremely cautious using a pressure washer as it will blast more fragile bone to pieces and can easily destroy a skull.
DEGREASING
You will need a degreasing agent for this step, most of the liquid dish soaps will work great here, just avoid the opaque ones or ones with strong colors (colorless and clear work great and won't dye the bones). Laundry soap often doesn’t work as well, and some will dye the bones. The exception to this is enzymatic detergent (in the US this is sold as BIZ), which works well as a degreaser. This step requires a container big enough for you to submerge the remains in. Add water and soap – how much soap is up to you and depends on the amount of grease in the bones. You will need to change the soapy water as it becomes cloudy, generally at least once a week. Continue this process until fully degreased – i.e., the water doesn’t cloud after a week. This is the longest step, and will take much longer than you think. If you see any yellowing or oily spot on the bone, then it still needs degreasing.
You can substitute acetone or ammonia for dish soap as the degreasing agent, but both have their safety issues. Ammonia is an irritant, so only use ammonia if you have a respirator. Also, be careful when emptying the liquid as household ammonia will kill vegetation.
Acetone also can be used, but you cannot dilute it with water. As a result, acetone is often more expensive that using the other two agents, and as a bonus it can melt plastic, so you will want to use a different type of container than a plastic bucket. It also dissolves nitrile and latex gloves, is flammable (no heating the liquid), and the fumes are toxic, so there is that. Also, acetone will evaporate, so the container needs to have a tight lid. If used correctly, you can treat multiple batches of bones with acetone, and acetone works faster than other methods. Lastly, acetone can’t be disposed of down the drain because of it’s toxicity and remember that bit about dissolving plastics…like your drain pipes?
WHITENING
After the bones have been degreased, you may wish to whiten the bones. This is not a necessary step, and is mainly cosmetic though it does help to sterilize the bones. You can use 3% hydrogen peroxide from the store, and it can be found in higher concentrations as hair developer, which is up to 12% hydrogen peroxide. Other options for obtaining hydrogen peroxide are from a pool supply store, though you have to be careful that it isn’t mixed with other chemicals. The important things to remember during this step is that A) hydrogen peroxide will degrade quickly when exposed to sunlight, and B) hydrogen peroxide degrades rapidly when exposed to heat, C) hydrogen peroxide will degrade faster when exposed to air. So, it works better when covered and not in direct sunlight.
Simply submerge the bone in the hydrogen peroxide until you reach the desired whiteness. If using 3% hydrogen peroxide, it isn’t necessary to dilute the liquid. Higher concentrations may require dilution as it is a powerful oxidizer.
An alternative method to submerging in hydrogen peroxide is sun bleaching. Note that this exposes the bones to the elements, and you lose a lot of control over the whitening process. It also takes considerably longer than the hydrogen peroxide approach.
NOTE: Chlorine Bleach should NEVER be used to whiten bones. Chlorine bleach degrades the bone collagen, which is the protein component of bone that holds the mineral component (hydroxyapatite) in place. This will leave the bone brittle and powdery, and the bone will continue to degrade over time. The effects are irreversible.
DRYING
I add this as a last step as this is a critical step where mistakes are often made. Bone is a porous material that contains organic components. If dried too rapidly, those organic components can shrink, or parts of the bone may dry faster than other parts. This can result in cracking, warping, and delamination of the bone. In general, let the bones dry slowly and out of the sun. Do not bake or expose it to high heat, or attempt to speed up the process. You may notice teeth cracking during the drying process. This is not uncommon, and you can glue the teeth back together after they drying process is complete.
r/bonecollecting • u/ryulis99 • 1h ago
Bone I.D. - Europe What animal is this? Cadiz, South Spain. Near a pine tree grove
r/bonecollecting • u/_Cavallone_ • 22h ago
Collection Coyote Articulation Project - Arcturus and Antares
Almost a full year in the making, I can now post photos of my beutiful coyotes! Had to bring out my photography camera to get the best closeups
They aren't perfect but I did my best. I hadn't done anything even remotely similiar to this before. But I'm so happy to share them know that they are officially done.
I found them in fall of 2025 and started work on them in July 2026. Hope you like them!
r/bonecollecting • u/willtherat • 2h ago
Bone I.D. - Europe Is this a cat? I found it on an island in Sweden many years ago
r/bonecollecting • u/shedantler21 • 14h ago
Collection Antler hunt….
I’m on the hunt to tell the story of some of the biggest shed antlers that have been found! Those sheds that the farmer down the road found and never shares with anyone, the sheds that you’re great grandpa found, the sheds that have been laying in a barn for years, the sheds that have been hidden and tucked away for decades! I’m looking to bring them to light and share their stories! Paying finders fees for successful leads!!!
r/bonecollecting • u/GreenHorse3026 • 20h ago
Bone I.D. - N. America A crow brought me this bone for feeding it
I don’t really care what animal it’s from but it would be cool to know.
I’m mostly just curious if they’re just returning what rotisserie chicken bones I feed them, or if they’re giving me something different lol
What do you think?
r/bonecollecting • u/muddy-twig • 3h ago
Bone I.D. - Europe Found North Berwick
Would love to know what it's from!
Found on the beach in North Berwick, UK.
r/bonecollecting • u/scrim_sean • 11h ago
Advice Finger bone, but of what animal?
I've dug up a lot of interesting stuff in my backyard, old marbels, old glass bottles soo much broken glass, even a very creepy magic spell ! and quite a few bones most of them I'm certain are cow bones based on the clean cuts. how big the bones are. this bone i dug up recently stood out to me and I need a second option on what it might be
r/bonecollecting • u/Small-Inevitable00 • 1d ago
Bone I.D. - Europe Need help identifying this bone
I was thinking probably a femur but not really sure about what animal so I would like some help
EDIT: I just measured it and it's around 34cm (I think around 13.5 inches)
r/bonecollecting • u/CurioandCrow • 18h ago
Art I drew bark and roots over a naturally cleaned deer skull. It took the forest's handwriting.
This is a real, naturally cleaned deer skull, found in the woods in Minnesota, that I hand-drew all over in pen and marker. Lines rise from the muzzle like roots finding their way and spread across the brow like bark grain. They close around a pale diamond between the eyes, the way a knot forms where a branch once grew. I let a little moss-green creep in at the edges.
On one side the runes spell "deer," and on the other they spell "skull," so the skull names itself in two halves. Older runes elsewhere have worn too far to read, and I kept them that way. It looks like the woods wrote over their own words.
It's about 10 x 5 x 4 in and weighs around 8 oz. The natural pits and texture of the bone stayed in and became part of the drawing.
The photos are real photos of the piece. I'm happy to answer questions about inking on bone, including what holds up and what fades. 🖤
r/bonecollecting • u/Totaltyphoon • 3h ago
Bone I.D. - Europe Small limb bones found in Scotland
I found them when I was younger on a trip to Scotland.
Screwdriver for scale.
r/bonecollecting • u/Mysterious_Stick3616 • 16h ago
Bone I.D. - N. America Bone id
I believe it’s a small domestic cat but not certain
r/bonecollecting • u/TootMCT • 21h ago
Bone I.D. - Europe Is it possible to know the exact species of gopher?
I have this pocket gopher skull but I’m wondering what the exact species is? I’m in Sweden but we obviously don’t have gophers here and I don’t know the origin unfortunately, I got it as a gift and the person who gifted it to me got it from a seller second hand
r/bonecollecting • u/One-Organization4874 • 16h ago
Advice Are there any specific tips on how to get rid of the yellowing on these teeth?
I’ve read that teeth don’t need to be degreased the way other bones do, and that yellowing isn’t actually caused by grease, so I’m kinda confused about how to process teeth properly.
r/bonecollecting • u/oh_the_struggle • 15h ago
Bone I.D. - N. America What is this?! My man found it in a gutter when he was working and it’s huge!
Found in Utah, near the Copperton area. Really cool timing because we were talking about wanting to go out and intentionally find bones
r/bonecollecting • u/East_Hyena_6041 • 15h ago
Bone I.D. - N. America Can someone identify this?
Found this bone in a gardening reboot in a backyard in Echo Park (LA) and first thought coyote, but curious what it actually is? No other known animals outside of dogs of this size in the area, but who knows how long it’s been here as a backyard cleanup ¯_(ツ)_/¯
r/bonecollecting • u/SupermarketFit2158 • 1d ago
Bone I.D. - Europe Is this real
I bought a tooth or something in vienna at a second hand shop for 5 euro, is this real. It feels pretty heavy for it to be plastic
r/bonecollecting • u/wiktor2317 • 15h ago
Bone I.D. - Europe Bird?
Hi, i think it's a bird femur, maybe chicken, am i right?
found near the entrance of a little urban forest, so i think there's a high chance it was just from someones dinner
r/bonecollecting • u/handicapped-penguin • 22h ago
Bone I.D. - N. America What animal is this from?
My partner found this piece of a jaw bone in our yard, we think it may be a dog, but i wanted to see what you guys think
r/bonecollecting • u/Practical_Eggplant24 • 20h ago
Bone I.D. - Atlantic Coast What sea creature? Located in NJ
Pretty shocked to have found a vertebrae! Super cool, any idea what sea creature it came from? Found another one just like but slightly smaller near it after I took these photos. Island beach state park