r/c64 • u/MostlyHarmless1138 • 7h ago
Hardware Looking for help with SIDKick Pico only working intermittently
Hello, all;
I just assembled and flashed the 2350 DAC and installed in my breadbin C64 (250425) because the SID chip went belly up. I'm not using the original power cube -- I made one from a 5V DC switching power supply and a 9V AC transformer.
TL;DR: The SIDKick only seems to be working intermittently. Sometimes I can get the config screen and sound, most other times I can't. It's like the PI is not always initializing the way it should. Sometimes the SYS 54333 even freezes the computer. When it works, it works for as long as the computer is running. If I turn it off, then on, again, it most likely won't work.
Firmware is SKpico_FW0.224.
Any thoughts? Is there some reason the SIDKick might not be recognized properly by the C64?
Thanks!
Long version:
Flashing went as expected, and the C64 booted up as it always does. On the first try to open the config screen (SYS 54333), the screen only cleared and returned to READY. Then, nothing else (list, print, type a program line, etc.) would do anything but clear the screen and return to READY. After turning off the computer and trying again (several times), I finally got the config screen, where I was able to change to the 6581. Loading a few programs gave me the sound I expected.
After turning off the C64 to insert a cartridge, the same issue came up. After a few more tries of turning off and on, with and without the cartridge, I did get the config screen and had good sound. But turn the computer off and on, again, and nothing.
When it works, the sound is great. But I can't figure out why it only works occasionally.
Edited for spelling....
