r/calculators • u/koobrk • 3h ago
Collection Burroughs C 3146
galleryBurroughs C 3146 (manufactured in Japan in 1970, based on the Rockwell/Sharp electronics of the famous Sharp QT-8B).
The display system it uses is an array of individual Vacuum Fluorescent Display (VFD) tubes of the Itron / Digitron type (each digit is an independent glass envelope—in this case, 8 main tubes plus a sign/overflow indicator).
- Technical Characteristics of the Display (Individual VFD Tubes)
Viñeta Operating Principle (Vacuum Triode): Unlike Nixie tubes (which work via cold-cathode gas discharge at high voltage), a VFD tube is essentially a miniature high-vacuum thermionic valve (triode):
Viñeta Cathode (filament): Very fine tungsten wires coated with alkaline-earth oxides that run in front of the digits. They are lightly heated with a low voltage (around 1 to 1.5 V) to emit electrons via thermionic emission, without reaching visible incandescence (if they are seen glowing red in the dark, it indicates overvoltage).
Viñeta Grid: A very fine metal mesh positioned between the filament and the segments that controls electron flow and enables multiplexing (turning each tube on sequentially at high speed).
Viñeta Anodes (segments): Segment-shaped metal plates coated with zinc-doped zinc oxide phosphor. When given a moderate positive voltage (typically between 15 V and 30 V), they attract the electrons and emit light through cathodoluminescence.
Viñeta Color and Luminous Spectrum: The phosphor emits a bright bluish-green (turquoise/cyan) light with a broad spectrum. This allows green or amber optical filters to be used on the front window to greatly increase contrast under bright ambient light.
Viñeta Digit Geometry (8 Segments / "Itron" Format): As clearly seen in the 4, 6, and 8 in the photograph, these early tubes did not use the modern standard of 7 straight segments. They used 8 or 9 curved/slanted segments (with an extra vertical/diagonal segment to close the 4 or round out the 6 and 9) designed to provide a more organic, legible typeface, while also integrating the decimal point inside the envelope itself.
Viñeta Low Power Consumption and Compatibility: Because they required low plate voltages (20–25 V compared to a Nixie tube's 170 V), they could be driven directly by early MOS/LSI integrated circuits (such as the 4-chip Rockwell set in this machine) and run on internal rechargeable batteries or a 12 V car adapter.
- History and Evolution
Viñeta Invention in Japan (1966–1967): The vacuum fluorescent display was invented in 1966 by Dr. Tadashi Nakamura, founder of the Japanese company Ise Electronics Corporation (later absorbed by Noritake and known as Noritake Itron Corp.). It was first commercialized in 1967 under the trademark Itron (other manufacturers such as NEC or Futaba marketed them under names like Digitron).
Viñeta The Catalyst for the Portable Calculator: Before Itron, electronic desktop calculators (1963–1968) relied on Nixie tubes (heavy, expensive, fragile, and demanding high voltage) or rear-projection displays with incandescent bulbs. The arrival of small cylindrical Itron tubes (such as the DG10 or DG12 series) made it possible for the first time to build compact, silent, battery-powered calculators, ushering in the era of the portable calculator between 1969 and 1971.
Viñeta From Individual Tubes to Flat Panels:
- 1967–1972 (Discrete Tubes): Each digit was a separate cylindrical envelope soldered to the board (as in this Burroughs C 3146).
- 1972–1975 (Multi-Digit Tubes): To reduce assembly and alignment costs, 8 or 12 digits began to be encapsulated inside a single elongated glass tube.
- Late 1970s Onward (Flat Glass Panels): Cylindrical tubes were abandoned in favor of flat rectangular glass-frit-sealed packages, dominating for decades in Hi-Fi audio gear, VCRs, car dashboards, cash registers, and microwaves, before being gradually displaced by LCD and OLED displays.