r/Carpentry • u/mmbarr27 • 1d ago
Bar I designed and built, mid century modern English pub
r/Carpentry • u/mmbarr27 • 1d ago
r/Carpentry • u/hemlockhistoric • 21h ago
Yesterday we received about 25% of the pine we'll need for next year's project. We built level sleds, and got to stacking!
Most of the studs and primary and secondary posts on the house are rotten on the bottom. 9' framing repair materials are in the first photo; 12"x10", & 3" slabs.
I had the Sawyer cut the rest of the materials to 4/4 for sheathing except for 5/4 slabs on either side of the pith which I can use for building historic passage doors, shutters, and sashes.
r/Carpentry • u/mutennn • 10h ago
Bought this prehung interior door from Lowe’s. The door/frame doesn’t seem properly aligned, and I’ve already drilled several screw holes during installation.
Is this fixable, or should I return/exchange it? Any suggestions?
r/Carpentry • u/Motor_Arugula_6079 • 1d ago
Let me preface by saying that I don't know what I am doing. Learning as I go lol. For one thing, this cabinet is far bigger than I need it to be but there's no turning back now. Gotta finish it. The problem is weight distribution. The cabinet is 7" deep, but the massive doors (over 4dt tall) extend out so you have 26" of length from back to front.
You can also see that the base likely doesn't stand chance as it only extends out 3" when the cabinet is closed. Also I used pine, which I regret.
Question: should I reinforce the current base or take it off and replace it completely? Either way, what are my best options? I'm proud of the way it's turning out, and I am enjoying the learning process. I just need to troubleshoot this lol.
r/Carpentry • u/technoviking9 • 13h ago
r/Carpentry • u/hemlockhistoric • 1d ago
r/Carpentry • u/ZestycloseRain7578 • 1d ago
Pre-finished Cabinet crown will be the death of me.
r/Carpentry • u/Kit4242 • 1d ago
I live in an area with expansive soil and we are required by code to have floating framing in basements. This is a non-load-bearing wall. I need to frame in a door and looking at diagrams to do it correctly. My question comes in nailing the door frame to the wall frame. The diagrams I find have nails going into both the bottom plate and the wall framing. I don’t understand why it would be nailed to the bottom plate in this situation. If the soil expand/contracts, wouldn’t the door be pushed up by the bottom plate but also want to stay in place by the nails in the wall framing that, in theory, should be staying where they are regardless of expansion/contraction?
Also, what should I do about door frame itself? Should it sit flush with the foundation as it shows in this picture? Or should it be trimmed short to allow for that movement?
r/Carpentry • u/Sea_Fox3220 • 2d ago
Proud of this
EDIT*** My goodness thank you so much for all the kind words. It’s really validating and makes me very proud of myself. Made my day for the second time in a row ❤️. Im only 25 so this is a pretty big deal for me to be honest 😂
r/Carpentry • u/Human-Yak-4295 • 1d ago
I’d like to frame this wall, but I have some challenges to overcome:
Any other tips? Ideas?
Should I build a ledge at the bottom to cover the pipe and get closer to the wall?
Thanks
r/Carpentry • u/StevenL360 • 1d ago
Had a pocket door installed and trying to figure out how to get trim put on the inside of the closet door. The right side of the door ends right on the wall so it doesn’t really have anything to attach to… any help or suggestions would be appreciated.
r/Carpentry • u/chunkypjellyroll • 1d ago
The Mrs. wants a swinging daybed on our porch. Of course the builder used 2x4 engineered joists. Pictured is my attempt to add support. I opted to add a 4x4 spanning the entire roof section (5 trusses) resting on the trusses and top plates, then add blocking at the swing hook attachment locations.
There’s an identical support not pictured to account for the four attachment points of the swing.
No idea if this will work or not but we’re rolling with it. Let me know if you have any advice.
r/Carpentry • u/Constant_Entrance_40 • 2d ago
Finishing up a couple of rooms on the massive historic restoration of Lee Plaza a forgotten gem on Detroit’s west side. Trimmed out this commercial door, hiding shitty metal flanges today and was pretty proud of how far these spaces have come.
r/Carpentry • u/Maleficent-Anxiety75 • 2d ago
Didn’t notice this when pulling off the old trim, but for some reason half an inch of caulk doesn’t seem like the solution. This is solid wood 1x5 baseboards btw.
r/Carpentry • u/Top-Sea-2109 • 1d ago
Any good solar panel/charging stations for work trucks/vans?
r/Carpentry • u/Castor_Legrand • 2d ago
r/Carpentry • u/upsidedownlunchbox • 2d ago
Lots of work for a 3 man crew
r/Carpentry • u/daddyfatsack1337 • 2d ago
New to this Sub. Had an Estwing 19oz for 11 years now and its on its last legs, It definitely doesnt owe me anything and I love it and would happily buy another but Im wondering if paying a premium would get me something better or if its all just fluff.
r/Carpentry • u/macetheface • 1d ago
r/Carpentry • u/BoneDr210 • 1d ago
We’re putting an outdoor kitchen under the pergola we have that is attached to the house. It is flat, not on a slope. See pictures. The distance between the rafters underneath the horizontal purlins is 28 1/2 inches.
I have read a lot of posts of people putting in a roof using SunTuf panels above. But I would have to build a slope to accommodate that. Also, given that we have a balcony just next to the pergola, I don’t love the look of a slanted roof that’s visible from above.
I was looking at some options where panels could be installed between the rafters. I looked at Timertech dryspace, which would be perfect, but they only make 12 and 16 inch wide panels. That solution would be perfect but they don’t make wide enough panels. Is there a way to achieve something like that with panels that are 28 1/2 inches wide?
I’m a homeowner so this would be a DIY project but I’d like to think I’m pretty handy :)
r/Carpentry • u/Ok-Author9004 • 1d ago
I haven’t done much picture molding yet, I’m curious if there’s an equation for getting equally sized frames. 6” from each wall and I want 6” in between them. Every time I divide it up, they come out as different sizes.
r/Carpentry • u/QueerCarpenter • 2d ago
We’re going to lose a lot of master carpenters to retirement in the next 5-10 years. The push to go to college for the past 25-30 years has created a big gap, but interest in the trades is coming back around, and will only grow more as AI continues to take jobs. Looking forward, the industry is going to need young people to step up and get really good, really quick.
Who are these young people? What qualities do they possess that shows promise for excellence? How are these qualities different, if at all, from young carpenters of the past, or other carpenters that will never be better than mediocre?
r/Carpentry • u/jvkme-75-3321 • 2d ago
Project involved demolition, framing, electrical, drywall, tape and bedding, texture, paint cabinet making with full extension drawers, tambour and installation. Complete package, one guy.