Hi /r/Chempros. Have you ever shed blood and tears on writing a script, only to find after a few weeks that something really similar had already been done? Have you ever created a specific tool but didn't really had the time or the right place to share it with your colleagues? Have you ever seen a really useful reddit post that you wish you had saved?
I have, and after a quick exchange with our dear mod /u/wildfyr I've decided to post this thread.
Scope
I would like for it to be a location where we can share our favourite resources, including but not limited to:
Freely available tools and softwares (we don't do piracy here)
Scripts in whatever programming language
Specific "general" papers (i.e. the famous "NMR impurities table")
Reddit posts
I will try to keep it updated by following your comments and discussions, so feel free to contribute!
Sections
Tools and softwares
mechaSVG - A free python software to draw energy diagrams in SVG (by ricalmang)
PACKMOL - A software to create initial points for Molecular Dynamics simulations. It has a great variety of applicable contraints that let you create spheres, layers, bilayers, mixed solvent systems... A must-know for computational folks (by Leandro Martínez, José Mario Martínez and Ernesto G. Birgin)
Merck tool for reduced pressure distillation - It allows to estimate the boiling point of a compound at a reduced pressure by inserting the boiling point at atmospheric pressure and the reduced pressure value. Another website for that calculation is Boiling Point Calculator, with the addition of the possibility to enter the heat of evaporation of your compound or to select one from a lsit of similar compounds.
Peakmaster, Simul, AnglerFish and CEval - Various software for people who work with capillary electrophoresis. Useful for pH calculations, prediction of background electrolytes and analyte peaks, simulations of electrophoretic runs, evaluation of electrophoretic runs, etc. To download them, just scroll down the provided website.
NMR spectrum simulator - Predicts the NMR spectrum (1H, 13C and some 2D experiments) of whatever compound you draw in there. You can also drag and drop .mol files as input. The same website has another tool to predict the splitting pattern, given the multiplicity and the coupling constants.
Mass spectrometry adduct calculator - You can consult the provided table or download a spreadsheet file to help with your calculations for mass spectroscopy peak assignement.
Mercury - A software to visualize and analyse crystallographic data.
BINDFIT- A online package for modelling titration data for host/guest supramolecular interactions.
Energy unit conversion calculator. Also includes a boltzmann population and electrochemistry voltage calculator. Just a no nonsense tool over all. You type values and it does the conversion.
PGOPHER. The standard software used for rotational spectra simulation. Can handle anything from that one HCl FTIR lab everyone does to research level microwave spectroscopy problems.
SWISS Tools - A complete set os softwares for Drug Discovery. It has everything: Target prediction of a small molecule, Webserver Docking, ADME prediction or bioisosteric replacement.
Glotaran - A free software program developed for global and target analysis of time-resolved spectroscopy and microscopy data.
modiagram - A tool with a Latex-like synthax to draw Molecular Orbital diagrams
MultiWFN - software for visualization and quantitative analysis of QM calculation output
VMD - software for visualization of molecular structures and isosurfaces
ToposPro - software for geometrical and topological analysis of periodic structures
CrystalExplorer - software for Hirschfield analysis of molecular crystal structures
tochemfig - A freely available tool (on Github) to draw structures in LaTeX format from a variety of input formats (SMILES, files and PubChem entries).
SDBS, Spectral Database for Organic Compounds - Database with spectroscopic information of various organic compounds, mainly 1H and 13C NMR, MS and IR, sometimes ESR and Raman are added too.
Azeotropes database - Freely accessible database with information on the azeotropic behaviour of ~16k binary and ternary mixtures.
Melting point dataset - Database in .xlsx format of ~28k compounds melting points, together with the Chemspider ID of the compound for identification.
Refractive Index Database - Has a bunch of optical constants and dispersion formulas for common optical materials. Lifesaver if you need to design a nonlinear optical system.
Natural product database - The Natural Products Atlas is designed to cover all microbially-derived natural products published in the peer-reviewed primary scientific literature.
Chemical index database - This database is a database of chemical substance properties, containing a large amount of pharmacological and biologically active material properties information data.
EVISA Materials Database - It contains information about Certified Reference Materials (CRMs), standard materials for identification of compounds or calibration, sorbents and reagents used for elemental and speciation analysis.
NORINE Database - Nronribosomial peptides database, contains a lot of data about peptides produced by bacteria or fungi. Among the collected data, the structure as well as various annotations such as the biological activity and the producing organisms, together with the respective bibliographical references.
PhotoChemCAD - Spectral database of material science-relevant molecules (such as porphirines, chlorophylls, etc...). Comes with an accompanying software that can be used to browse the database and analyse the obtained data (for example by calculating the spectral properties of a mixture of compounds).
Websites
Notvodoo - Contains tips and tricks to improve your organic lab skills, like purifications, chromatography and workups.
Organic Chemistry Data - HUGE website with everything you might need about organic chemistry: named reagents, spectroscopy resources, reaction info and more!
Hebrew University of Jerusalem NMR lab - Lots of theoretical and experimental information about NMR data acquisition and interpretation, especially for some more exotic nuclei.
RP-photonics encyclopedia. Has an article on basically everything you could think of in the laser/photonics/optics space. Not enough alone for most things, but a good starting place.
Schlenk Line Guide - Useful website to get some help on how to use and maintain a Schlenk line, for examples how to prepare samples for NMR or how to shut one down.
ACS med chem tips and tricks - Contains a few tips for purification, choice of reagents and solvents, both for setting up a reaction or chromatography.
UC Davis NMR resources - Created by the NMR facility of the UC Davis, it provides a lot of resources from manuals to papers to NMR reading.
Denksport - From Prof. Maguauer and Prof. Trauner groups, it provides quizzes on synthetic organic chemistry, extracted from total synthesis papers. It provides both the questions and the answers as two separate files. The Fukuyama groups also hosts something similar (you have to click on "Group meeting problems" on the left).
Illustrated glossary - Illustrated Glossary of Organic Chemistry. It contains a LOT of terminology. Useful for students too.
Dan Lehnherr - It has loads of resources including: databases, reference data, Laboratory Procedures, Tools, Software and Safety, reference tools and lecture notes.
LiveChart of Nuclides - An interactive chart that presents the nuclear structure and decay properties of all known nuclides through a user-friendly graphical interface.
Biorender - A software for the creation of scientific diagrams and illustrations (images made on the free plan cant be used for publications or commercial use though).
Chemistry Reference Resolver - A free website that allows you to paste a reference and go to the source (even "lazy" citations, as they call them: "acie 45 7134" correctly brings you to this paper, for example). It can also resolve much more such as Sigma-Aldrich catalogue numbers, DOIs, SDSs, etc... You can read the help section for more info.
Scripts
Gaussian Matrix Parser - A python script to parse the output of a Gaussian calculation and write a matrix with the desired values on a text file.
Zotero - Free software for managing your literature and to add citations and bibliography to your papers or reports. It has also a sharing function, to create a shared library with your colleagues.
Mendeley - Another free software from Elsevier for managing your literature. It come with a Word Plugin and it has a "share literature" function too.
Evan's pKa table - Contains experimental and extrapolated pKa values for various functional groups, both in water and DMSO. Another website has done something similar, but only with carbon acids.
Sigma-Aldrich cross coupling reaction guide - It's a cheat sheet with a lot of suggested conditions for several cross-coupling reactions divided by chemical class (e.g., bulky amines Buchwald-Hartwig, amide Buchwald-Hartwig, etc...). It should be free to download.
Best-Practice DFT Protocols for Basic Molecular Computational Chemistry - An excellent cheat sheet by one of the most well-known computational chemists, Prof. Dr. Stefan Grimme. If you need a starting point to do some QM calculation on your systems you can start looking at these examples. Disclaimer: you should still be looking in the literature for similar cases as yours, don't just take these protocols at face value.
Books
3. Organic Syntheses - More of a journal than a paper, it contains thousands of freely available synthetic reactions. Prior to publication, the reactions have been validated in an independent laboratory. It also comes with tips, tricks and photos for setting up the reaction!
4. Purification of laboratory chemicals - The Bible for purifying common organic reagents and solvents. You can search for them in the text by name or in the index by CAS number (reccomended).
Greene's Protective Groups in Organic Synthesis- The main reference about protecting groups for several functionalites, together with the conditions used for their insertion/removal. It has also stability tables for various protecting groups for a rapid check.
Does anyone have experience working with a PAC ElemeNtS, Elementar Trace SN, or Nittoseiko NSX-5000? I am looking for a trace nitrogen analyzer with chemiluminescent detector to analyze alcohol/water mixtures (10%-80% organic) with <20ppm nitrogen. Any recommendations or issue on one of these analyzers? How is the accuracy, repeatability and stability? Many thanks.
I am dealibg with the Fmoc deprotection and coupling reaction in solution phase Should I deprotect the Fmoc and isolate the unprotected amine before coupling with another amino acid using HATU and DIPEA? Because when I did not isolate it, my yield is very bad and I mostly saw the DEA-fulvene adduct in my reaction (I used DEA to deprotect Fmoc).
I'm an organic chemist in industry and recently my company became interested in a very specific class of crown ethers for further applications, namely derivatives of (+)-18-crown-6-2,3,11,12-tetracarboxylic acid. To make this, you hydrolyze the corresponding tetraamide. Making the tetraamide itself requires macrocyclizing N,N,N',N'-tetramethyl tartardiamide with diethylene glycol ditosylate in a Williamson crown ether synthesis.
I have attempted this macrocyclization every which way and I still keep getting zero percent yield despite lit procedures saying I should be getting something like 25% (low but usable). The procedure I have been attempting to follow is:
It then goes on to say it was recrystallized from acetone. Instead, what I get at this stage is not a pale yellow solid but some weird oil that has the wrong UV-vis spectrum and the wrong mass by LC-MS. Initially I thought maybe my old bottle of DMSO was the problem so I ordered anhydrous but it's the same story.
When I start adding the diamide to the hydride slurry, initially it goes well but upon warming to room temp after those two hours I get this extremely gelatinous foam that clogs up my stir bar. Then when I add the ditosylate, I was surprised to see a giant amount of foam kicked up by the addition, which I thought was weird since there should definitely be no gas evolution at this point. And it's the same story for DMF and DMAc.
Has anyone had any experience with crown ether syntheses or any of these polyanionic macrocyclizations? Any advice would be helpful. My initial thought is that I have no desired product because not all of my diol is deprotonated due to the gel-induced retardation.
I’m working with an Agilent 1260 infinity series at work and the pumps and lines salt out at least every other week if not more. The lab I’m in runs QaQc for manufacturing and the plant makes a ton of different products that don’t all get tested using that instrument so it sits idle for a couple days or up to a week at a time depending on production. The method set up on the instrument uses a 0.2% phosphoric solution in water and when a series of runs is completed a 1 hour flush is always added to the shutdown but it’s no help, the next time you go to use the instrument it over pressures and you need to take the next 20-30 minutes feathering the purge valve slowly trying to break through the salt buildup. The pump assembly currently doesn’t the peristaltic pump required to run a seal wash for the seal wash supports that are currently installed on the instrument and I wonder if that could be part of the problem. Does anyone out there know if it would lessen that salt buildup if the seal supports were swapped out to a standard set, or would it be more worth it to see if Agilent sells an upgrade kit for a 1260 infinity series that allows for the installation of a seal wash pump and if anyone knows of this upgrade if you also happen to know that part number it would be greatly appreciated. Any suggestions are appreciated though :)
Edit: I was definitely blaming the wrong mobile phase for the salting, this instrument also handles a 0.1M sodium phosphate solution that is definitely responsible, sorry for not noticing that before
Hi everyone, I am a P.h.d. student in organic chemistry and one of the issues I am dealing with is the desymmetrization of Methyl 3,5-dihydroxy benzoate (methyl ester of resorcylic acid). I need just one of the two phenolic hydroxyls to be protected with a base resistant PG. on reaxys everything has low yields (33% mostly) except some patents (which I didn't manage to replicate). Does anyone have a method or suggestions for this kind of reaction? Or am I stuck with a maximal theoretical yield of 50%?
I have about 500 grams of magnesium turnings that I need to get rid of. I'm trying to donate it to another company, but if I can't find a donor I need another solution:
Destroy it with dilute acid
Toss it in a chemical waste bin for solids
Given the quantity, destruction is super annoying and tossing it in the chemical solid waste super tempting. But I'm worried it burns a bit too well 😅 What would you do?
By coincidence, I'm not only a chemist, but also a mineral collector. Some of my specimens are tiny (millimeter size). I think it's a nice idea to store them in 2 mL GC vials. Those vials are durable, cheap and strong. For visiblity, it would be better if there wouldn't be markings on the outside (the white scale with 0.5 - 1 - 1.5 mL). I've never seen them in 2 mL, only in 4 mL.
Does anyone know of vendors that sell standalone IR interferometers for FTIR spectroscopy? I basically want a box where I can send in my IR light, set scan parameters, and get out the interfered light along with the reference laser signal. It seems that all of the instrument vendors only sell complete instruments, and the search results are flooded with companies that make IR imaging cameras that are generally single wavelength or not in the mid-IR region.
I realize this is kind of a strange niche. I'm scoping out a proposal that would use a separate IR source and detector setup so buying a full instrument is a waste of money, but I'd also rather not build the interferometer myself if I can help it since I'm not an optics expert.
We have a Thermo Apreo 2S SEM and STEM is our most used imaging method of nanoparticles for size and morphology. Recently, we had to have an FSE onsite after we saw some drift that was too extreme to image with. He did some things, and upon leaving sent an email with the following recommendations:
Allow system to pump down to mid or low e-4Pa before imaging
To minimize image drift on STEM samples, after finding area of interest, allow sample site to sit 30min -1 hour before making images.
Number 1 makes total sense, but the second point he made wasn't shown or conveyed to me by either of our two application engineers that trained me. We use the system for classes - imaging nanoparticles synthesized in inorganic labs and bacteriophages in biochemistry labs, so the waiting for almost an hour is going to be tough. Furthermore, we know we have some contamination somewhere as we can see the carbon block appear on our sample as the beam sits.
I was curious what everyone else does to get really good STEM images? Of course, when I emailed folks that I was going to be trained and would like them to provide samples for said training, not a soul got back to me.
Right now, if the sample is metallic nanoparticles, I have people use our plasma cleaner that we have (it is not one that can be on the microscope). For organic type samples that won't survive the plasma cleaner, people just let them dry naturally. I have purchased a desiccator that can have a vacuum drawn on it and have been pushing people to use it.
I have plenty of Lee-Miesel Ag nanoparticles I can put on a grid to practice with.
Thanks to anyone willing to share their experience/expertise!
Hi all - I run an ETV attached to an ICP-OES. The ETV is destroying graphite parts faster than it should. The vendor says oxygen is getting into the system somewhere. I've checked everything I can for leaks. The only thing left is to check the gas lines for oxygen to see where it's coming from. I've messaged several companies, but I can't find a handheld meter that can read oxygen levels in an argon stream. I need it to read down to 5ppm. Any ideas?
Hi, just want to know about the solution of the network formation after adding NaOH along with a salt, it forms a green jelly like network, why is it happening and how to dissolve this network in the solution and either this jelly typed network is necessary for the formation of NPs.... and if it's not necessary and need to dissolve ot completely, then how to do this... please let me know if anyone has done his/ her work with is gum. Regards.
So I have the Avio 550 Max running sample for an Enviormental company. The conc in sample units will not show. All the information is there in place and the units are correct and in place. Send help lol
Curious what actually costs academic chem labs the most time and money these days. Is it fighting for NMR or mass spec time, waiting on a shared instrument that’s down, purifications that eat whole days, ordering delays, solvent and waste costs, processing data, or something else entirely?
I’m a student researcher digging into this, and I put together a short survey (about 5 minutes, confidential) for grad students, postdocs, lab managers, techs, and PIs in academic labs:
Hi all, I am a final PhD student and am currently thinking about my next career move. I want to apply for entry level industrial positions ( process or medchem maybe) and I want to slowly start refreshing my general organic chemistry knowledge. From talking with people who have gone on that route, it seems that the interviews for these positions involve a technical interview, some sort of disconnection of a larger molecule.
Apart from classic chemistry textbooks, can you guys recommend any resources for preparation for such types of interview questions?
My supervisor recently purchased some very expensive cylindrical short-pathlength cuvettes from Starna for me to do CD on very concentrated samples. I started using the 0.01mm one but am having trouble cleaning it after first time use...
I cleaned it by flushing the cell with 1ml water x 6, ethanol + water mix x4 then ethanol x 4. The compound is a very water soluble sugar that crashes out in ethanol, and during cleaning I did not see any precipitated sample in the cuvette. It was then dried upside down over the weekend, but once dry I could see that my sample had dried out on the inside of the polished windows
It seems that flushing solvent through only exchanges solvent in the ring around the polished windows and doesn't actually exchange the liquid in between the two windows/the 0.01mm bit.....
I have already written Starna for a practical guide for cleaning of microcells, but do any of you have any experience using this particular cuvette?
Crossposting for chemists who write papers and theses. Disclosure: this is my project, free and open source.
Reactio Draw is a structure and reaction editor. It now works with your writing tool on every platform:
Word on Windows and macOS: copy a drawing in Reactio Draw and paste it into Word as an editable object. A double-click opens it again for editing.
ONLYOFFICE on Linux (also on Windows and macOS): the same clipboard paste (Alt+Shift+V) and double-click editing.
LaTeX in VS Code, Overleaf and Lattice: paste a copied drawing from the clipboard into your document, and double-click it to edit.
The whole drawing is stored inside the object, so you can still edit it months later on another computer. Compound numbers (1, 2, 3a…) stay in sync between the text and the schemes. It reads and writes CDXML and MOL, so you can still exchange files with colleagues who use other editors.
I am currently working on a reductive amination with a primary amine and an aldehyde using STAB.
Is acetic acid necessary for this reaction as i'm using STAB as a reducing agent? the aldehyde starting material does also contain a carboxylic acid functionality.
Im using a THF solvent but as i have the HCl salt of my amine it wont dissolve in THF or DCE. is solvation important for redams? Product is forming but after 6 hrs there is still amine in my workup. Will it likely need longer (eg overnight/24hrs)?
I have PhD and looking for postdocs and applied for this position that is LCMS and small molecules NMR heavy, during my PhD I have limited NMR experience and wondered how challenging it will to be able to develop more and solve complex structures including absolute configuration etc
Hi r/Chempros! We are a team of researchers at Johnson Matthey who research and develop pi-allyl palladium complexes, a precatalyst technology used for a broad range of cross-coupling applications (we also work on other novel catalysts for small molecule applications). Over the past few years we have seen their usage increase, and we have gained a better understanding of this technology.
We would love to hear from you and answer any scientific questions you might have. All questions are welcome and we will try to answer them the best we can. Please be careful with the specifics you share.