r/cinematography • • Jun 09 '25

New Rules Regarding AI on /r/cinematography!

291 Upvotes

Thank you all for participating in the poll! Here are the results. To accurately gauge everyone's collective acceptance vs rejection for each, I've tallied the total votes among all choices as pro/anti for each category. So for example, a vote for 'no changes' would be a -1 to Gen AI, AI Tools, AI Comms, and AI Discussion. A vote for 'Ban GenAI + AI Tools' would be a +1 to GenAI and AI Tools, and a -1 to AI Comms and AI Discussion, etc. So here are the results for each category of AI. Keep in mind that a higher number indicates a stronger group decision to ban the content:

GenAI: +52 (+71/-19)

AI Tools: -26 (+32/-58)

AI Comms: -8 (+41/-49)

AI Discussion: -58 (+16/-74)

From the results it is clear that sub overwhelmingly approve a complete ban on all generative AI. However, people are much more ok with AI tools and discussion of AI, and are fairly mixed on the topic of AI Communication. So here is the new rule for all things AI:

-------

Rule 11. You may not post work containing Generative AI elements (Midjourney, Neo, Dall-E, etc.). You may use and demonstrate the use of AI assisted tools (ie magic masking, upscalers, etc.) so long as they are used in service of human-generated artwork. AI Communication, like post bodies or comments composed using ChatGPT are allowed only in reasonable cases, such as the need for someone to translate their thoughts into English. Abuse of AI assisted communication will result in the removal of the offending post/comment.


r/cinematography • • Aug 04 '19

What Gear Should I Buy? What Is This Piece Of Gear? What Does This Term Mean? CHECK HERE FIRST! We have answers to the most commonly asked questions right here in /r/Cinematography's Official FAQ

957 Upvotes

Welcome to the /r/Cinematography Official FAQ And Information Post!

Below I have collected answers and guidance for some of the sub's most common topics and questions. This is mostly content I have personally written either specifically for this post or in comments to other posters in the past. This is however not a me-show! If anybody thinks a section should be added, edited, or otherwise revised then message the moderators!



Topics Covered In This Post:

1. What Camera Should I Buy?

2. What Lens Should I Buy?

3. How Do I Learn Lighting?

4. What Light Kit Should I Buy?

5. How Do I Learn Framing & Composition?

6. What Books Can I Buy On Cinematography?

7. What Blogs/Channels Can I Follow To Learn Cinematography?

8. Common Terms In Cinematography

9. What Is This Piece Of Gear!?

10. Common Myths In Cinematography



1. What Camera Should I Buy?

The answer depends mostly on your budget and your intended use. You'll also want to become familiar with some basic camera terms because it will allow you to efficiently evaluate the merits of one option vs another. You can see a list of common terms and metrics for cameras in Section 8 below.

This list will be changing as new models emerge, but for now here is a short list of the cameras to look at when getting started:

  1. Panasonic G7 (~$600) - This is widely thought to be the best starter camera for someone looking to move up from shooting on their phones or consumer camcorders.
  2. Blackmagic Pocket Cinema Camera 4K (~$1,300) - This is perhaps the most highly recommended camera for new entrants to the field who are after a professional image. This camera is often used as a crash-cam or supplementary camera on high budget productions.
  3. Fujifilm X-T3 (~$1,500) - This is a widely recommended and popular DSLM. It supports 4:2:2 10-bit recording to an external recorder, making it a direct competitor with the GH5.
  4. Panasonic GH5 (~$2,000) - This is perhaps the most popular prosumer DSLM filmmaking camera. It was one of the first to offer 10-bit recording in the price range.
  5. Sony A7 III (~$2,000) - This is a very popular camera for shooting in low light settings. It also boasts a Full-Frame sensor (compared to the GH5's M4/3 sensor), allowing you to get shallower depth of field compared to other cameras using the same angle of view and aperture.
  6. Canon C100 mkII (~$3,500) - This is one of the cheapest true digital cinema cameras. It offers several benefits over the above DSLR cameras, such as professional level XLR audio inputs, internal ND filters, and a better picture profile system.


2. What Lens Should I Buy?

Much like with deciding on a camera, lens choice is all about your budget and your needs. Section 8 also has a nice list of lens related terms for you to study up on! For the purposes of a quick recommendation, here's what you need to know:

Focal Length

This number indicates the angle of view your lens will supply. A higher focal length results in a narrow (or more 'telescopic') angle of view. Here is a great visual depiction of focal length vs angle of view. The exact number of the focal length cannot be trusted to supply the same angle of view on all cameras. This is because different cameras use differently sized image sensors. A smaller image sensor will use a smaller portion of a lens' projected image, and so the resulting picture will have a narrower angle of view. This phenomenon is referred to as crop factor and is outlined in more detail in Section 10.

Zoom vs Prime

This is all about speed vs quality vs budget. A zoom lens is a lens whose focal length can be changed by turning a ring on the lens barrel. A prime lens has a fixed focal length. Primes tend to be cheaper, faster, and sharper. However, buying a full set of primes can be more expensive than buying a zoom lens that would cover the same focal length range. Using primes on set in fast-paced environments can slow you down prohibitively. You'll often see news, documentary, and event cameras using zooms instead of primes. Some zoom lenses are as high-quality as prime lenses, and some people refer to them as 'variable prime' lenses. This is mostly a marketing tool and has no hard basis in science though. As you might expect, these high quality zooms are very expensive.

So What Lenses Should I Look At?

Below are the most popular lenses for 'cinematic' filming at low budgets:

  1. Rokinon Cine 4 Lens Kit in EF Mount (~$1,700)
  2. Canon L Series 24-70mm Zoom in EF Mount (~1,700)
  3. Sigma Art 18-35mm Zoom in EF Mount (~$800)
  4. Sigma Art 50-100 Zoom in EF Mount (~$1,100)

Lenses below these average prices are mostly a crapshoot in terms of quality vs $, and you'll likely be best off using your camera's kit lens until you can afford to move up to one of the lenses or lens series listed above.



3. How Do I Learn Lighting?

Alright, so you're biting off a big chunk here if you've never done lighting before. But it is doable and (most importantly) fun!

First off, forget three-point lighting. So many people misunderstand what that system is supposed to teach you, so let's just skip it entirely. Light has three properties. They are:

Color

This refers to, you guessed it, the color of your light. I'm sure you're familiar with this sort of thing. This also includes color temperature of the light. White balance is a hybrid camera-lighting concept, and refers to the white reference point for the lighting source as well as the camera sensor. To skip the science, here's a rough breakdown of white balance and color temperature:

Color Temperature is measured in degrees Kelvin. A tungsten light source has a color temperature of 3200K. A normal sunny day has a color temperature of 5600K. The higher the color temperature, the bluer the light. To compensate for this shift in color, cameras can change their White Balance to neutralize the color shift. Here's an example I found online that shows the differences.

Quantity

How bright the light is. You know, the quantity of photons smacking into your subject and, eventually, your retinas. If the subject isn't bright enough, you need more light. If they're too bright, you need less light. This can be done with scrims, dimmers, gels/nets, and (importantly) camera and lens settings.

Quality

This is the good shit. The quality of a light source can vary quite a bit. Basically, this is how hard or soft the light is. Alright, you've got a guy standing near a wall. You shine a light on him. What's on the wall? His shadow, that's what. You know what shadows look like. A hard light makes his shadow super distinct with 'hard' edges to it. A soft light makes his shadow less distinct, with a 'soft' edge. When the sun is out, you get hard light. Distinct shadows. When it's cloudy, you get soft light. No shadows at all! So what makes a light hard or soft? Easy! The size of the source, relative to the subject. Think of it this way. You're the subject! Now look at your light source. How much of your field of vision is taken up by the light source? Is it a pinpoint? Or more like a giant box? The smaller the size of the source, the harder the light will be. Here's a great example of a woman being lit by hard light (left) and soft light (right). You can see the difference in the quality of the shadows, as well as the size of the light source (look at the reflection of the light source in her eyes!). You can take a hard light (i.e. a light bulb) and make it softer by putting diffusion in front of it. Here is a picture of that happening. You can also bounce the light off of something big and bouncy, like a bounce board or a wall. That's what sconces do. I fucking love sconces.

Here's a cool bonus example that combines both qualities of light. In this image, there is a single hard light source above and behind the actors shooting down onto them. You can tell this by looking at how the shadows fall along their arms and on the table. Notice that the shadows on his arm from the direct light are quite hard! But now, notice that this light shining on the table and their arms is itself bouncing back up onto the actors' faces, giving them a soft light! This is a neat trick you can use, and an example of how complex and creative you can get with lighting. In the industry, this technique is known as a 'Bob Richardson' or a 'skip bounce'. It is named Bob Richardson after the cinematographer who popularized the technique (he also shot the above image!).

Alright, so there are your three properties of light. Now, how do you light a thing? Easy! Put light where you want it, and take it away from where you don't want it! Shut up! I know you just said "I don't know where I want it", so I'm going to stop you right there. Yes you do. I know you do because you can look at a picture and know if the lighting is good or not. You can recognize good lighting. Everybody can. The difference between knowing good lighting and making good lighting is simply in the execution.

Do an experiment. Get a lightbulb. Tungsten if you're oldschool, LED if you're new school, or CFL if you like mercury gas. plug it into something portable and movable, and have a friend, girlfriend, boyfriend, neighbor, creepy-but-realistic doll, etc. sit down in a chair. Turn off all the lights in the room and move that bare bulb around your victim subject's head. Note how the light falling on them changes as the light bulb moves around them. This is lighting, done live! Get yourself some diffusion. Either buy some overpriced or make some of your own (wax paper, regular paper, translucent shower curtains, white undershirts, etc.). Try softening the light, and see how that affects the subject's head. If you practice around with this enough you'll get an idea for how light looks when it comes from various directions. Three point lighting (well, all lighting) works on this fundamental basis, but so many 'how to light' tutorials skip over it. Start at the bottom and work your way up!

Ok, so cool. Now you know how light works, and sort of where to put it to make a person look a certain way. Now you can get creative by combining multiple lights. A very common look is to use soft light to primarily illuminate a person (the 'key) while using a harder (but sometimes still somewhat soft) light to do an edge or rim light. Here's a shot from a sweet movie that uses a soft key light, a good amount of ambient ('errywhere) light, and a hard backlight. Here they are lit ambiently, but still have an edge light coming from behind them and to the right. You can tell by the quality of the light that this edge was probably very soft. We can go on for hours, but if you just watch movies and look at shadows, bright spots, etc. you'll be able to pick out lighting locations and qualities fairly easily since you've been practicing with your light bulb!



4. What Light Kit Should I Buy?

OK! So you know sort of how to light a person. Now then, what lights do you need? Well, really, you just need any lights. If you're on a budget, don't be afraid to get some work lights from home depot or pick up some off brand stuff on craigslist. By far the most important influence on the quality of your images will be where and how you use the lights rather than what types or brands of lights you are using. I cannot stress this enough. How you use it will blow what you use out of the water. Get as many different types of lights as you can for the money you have. That way you can do lots of sources, which can make for more intricate or nuanced lighting setups.

I know you still want some hard recommendations, so I'll tell you this: There's a few ways to approach your first lighting kit, and the way I'd best recommend is the Cost vs Quality approach.

Cost vs Quality

Basically, the more you spend on a light, the higher its quality will be. There will also be diminishing returns, meaning that after you're spending a lot of a money, a few extra hundred or even thousand dollars may not result in proportionally higher quality units. Decide now for your own purchase: Which is more important to you? Cost or Quality?

Cost-Oriented Lights To Look At

  1. Par Cans (~$25 each)
  • These are powerful (Up to 1,000W) lights that you can use for accents, bounces, or through diffusion. Even on professional film sets we use these all the time! Grab the appropriate PAR64 globe and you're good to go!
  1. Paper Lanterns (~$18 each)
  • Typically known as the 'China Ball', these paper lanterns are wonderful low budget soft-lighting workhorses. They're still used on big sets as well. Don't forget to buy a lightbulb and a socket+cord for it!
  1. Lowel Lighting Kit (~$800)
  • This is a basic entry level 3-light kit, and a common package in small film schools or amateur filmmaking kits.
  1. Dracast LED Kit (~$900)
  • Just about the only decently-respected LED kit in this price range. It may have some green-shift in its color, so consider buying some minus green gels for them.

Quality-Oriented Lights To Look At

  1. Aladdin Bi-Flex 4 (~$2,900)
  • An up-and-comer in the LED mat world. It's quite a bit brighter than the LiteGear LiteMat Plus 4, but it's a bit more annoying to use at times. Still often spotted on professional sets.
  1. LiteGear LiteMat Plus 4 (~2,700)
  • The current LED soft bank workhorse. You'll see these used basically nonstop on top tier films alongside other professional (and more expensive) LED platforms.
  1. Arri Softbank Kit (~$3,500)
  • The classic. Thousands of amateur as well as professional films over the decades have used this light kit. Almost any self respecting lighting truck will carry these units (in greater quantity and along with their big brothers, of course).
  1. Aputure 120d II Kit (~$2,700)
  • A solid 'bright' LED option. These are often combined with soft boxes, diffusers, bounces, etc when employed on set.


5. How Do I Learn Framing & Composition?

To start off, let's all recognize that no person on earth is done with learning composition. Even Roger Deakins is discovering new tricks today. This is a fairly complex subject, just like lighting, because its quality is primarily a creative thing. There are, however, some fundamental rules that you should absolutely be aware of, for the purpose of both following them and breaking them appropriately!

The Rule Of Thirds

This rule tells us that objects in a composition will tend to look more pleasing if aligned along the 1/3 lines in the frame. Here's a great example. Now, you clearly don't NEED to follow this rule. Plenty of images look nice even without taking advantage of the rule of thirds, but this is a great guideline for arranging elements in a frame when you don't have any other ideas on what to do.

The 180° Rule | The 180 Line | The Director's Line

This guideline (forgive me) tells us how to position the camera when cutting between shots of two interacting subjects. You'll also see this referred to as maintaining screen direction. Here's a nice graphic I found illustrating this. Basically, draw an imaginary line between your two subjects. Pick a side of the line to 'use' for your scene, and stick to it! All of your angles will want to come from that side of the line. This will make sure that in any given angle, each subject will be looking in the same direction that they are in every other frame.

Breaking this rule is a common technique used to introduce an element of confusion, chaos, surprise, etc. War scenes will break the line to impart a sense of disarray in the midst of the battle. Spielberg famously breaks the line in Jaws when Brody sees the shark come up behind him.

Perspective

This is how 'wide' or 'tight' the angle of view in the frame feels. An excessively wide perspective gives you the 'fishbowl' or 'fisheye' effect like with the helmet-cam shots you disliked. A super 'tight' perspective compresses the visual field and makes nearby and far off objects appear closer. You can also call 'tight' shots 'long', as it refers to the type of lens used. Here's an example of super wide, wide, tight, and super tight images:

Super wide

Wide

Tight

Super Tight

Each of these shots sequentially has a 'tighter' or 'longer' perspective. Notice that it has nothing to do with the size of main subject of the frame, but rather with how the lens's particular angle of view effects the image. Here's a great way to visualize the difference.

Shot Size

This is all about how large the subject is in your frame, or how much information you have in the scene regarding the environment. Some common phrases we use for shot size are:

  • Close-up (in around face and neck territory)
  • Wide (full bodies and set)
  • Medium (waist and up)

There's plenty more to it, but most of those extra shot size names (cowboy, LS, ECU, etc.) are just shorthand for easily communicated ideas (cut them off at the knee, show me just their eye, etc), so not knowing those specific names shouldn't really hold you back. The interesting interplay here is of course in how you combine shot sizes and perspective. The frame grab from Se7en above, of the car driving between the electric towers, is an example of a wide shot (size) using a super tight / super long perspective.

Placement/Angle

This is where you put the camera, and how the resulting angles may influence the viewer. If for example you are shooting a scene of a news anchor on a news show, you don't want to place your camera lower than them. The placement of the camera would feel wrong, resulting in an 'up angle' on your subject. This sort of angle is used for tons of reasons, but it is very uncommon to use for news media. In your references, always look at the angles used (i.e. where the camera is placed in the scene vs where it could have been placed). Thinking of shots in this way will unlock a huge wealth of potential creative choices. A few terms you might use include:

Shoot from above / High Angle - The camera is higher than the subject, i.e. a security camera, the point of view of an angry parent admonishing their child, or a group of onlookers reacting to the appearance of a UFO above them. This kind of angle generally has the effect of diminishing power in the subject, making them appear weaker, vulnerable, or off-put.

Shot from below / Low Angle - The camera is lower than the subject (for humans, this is in reference to their eye-level). For example, a hero removes a piece of rubble, revealing themselves standing above us, the point of view of the child being admonished by their angry parent.

Eye-level / On Level - This refers to the height of the camera being the same as the subject's eye height. This is the general starting point for any shot. Deviation is for creative effect.

On the Eyeline / Off the Eyeline (Straight shot or Profile shot,. On Angle or Off Angle, etc) - This isn't about altitude, this is about how close we are to the subject's eyeline, or their looking direction. The closer we are, the more connected we might feel with the subject. Conversely, the farther we get from the eyeline the more detached we may feel from the character. Here's an example of two shots from the same scene in Bladerunner:

Profile

On-Axis

Almost everything about the two shots framing-wise are the same, except for the camera placement. See how big of a difference it makes? Always think about your eyelines and how close your camera will be to them.

Top Down / Bird's Eye - As you can imagine, these are shots with the camera placed on the ceiling or in the sky directly above the actors. These are similar to high angle shots, and basically they're the same, but doing a full blown top-down can have some interesting effects that a normal high angle shot wouldn't have.

Framing

This is the placement of elements in the image once you've decided on a perspective, shot size, and angle. Composition is all about how we nudge and finesse the image. Where do we place the subject? A great example of the power of framing is in how you cover two people speaking. Normally in a situation like this, with two characters talking to each other, you'd do a standard shot-reverse-shot, as shown here:

Shot 1

Shot 2

Each character occupies a side of the frame and looks into the empty portion of the frame. This is how 90% of OTS (Over The Shoulder) coverage works. But for every big rule there are big exceptions! Mr Robot is a great example of what's called 'near side framing' or 'short siding':

Shot 1

Shot 2

The difference however between the above shots and normal shot-reverse-shot coverage is in the framing. Instead of having the characters stacked on one side and looking to the opposite side, they've short-sided them, having them look instead away from the open frame space and towards the nearer frame edge. This has an unnerving effect on the viewer compared to the normal example above. I like these examples too because in both of these scenes we're dealing with people who are essentially insane. There are no rules on how to use framing to push the audience. It's all about how you craft your image. Each little choice has its own effect.

Movement

Moving images have a hugely different feel from static images. A camera that doesn't move in the scene is concrete, sterile, observant, somber, whatever you'd like. A camera that moves slightly in the scene is ethereal, subtle, inquisitive, prodding, suggestive, ominous. A camera that moves in great flourishes, rapidly, wildly, etc. is a camera that is a character, emotional, passionate, adventurous, exciting, etc.

How you move the camera will have different effects on your audience. Here's a few basic terms to use when articulating the type of shot you're after (I've excluded pan and tilt since I'm pretty damn sure you know what those are already):

Push-in/Pull-Out - The camera is on a dolly, jib, gimbal, shoulder rig, whatever-you-have, and it moves on axis, meaning along the line it's pointed at. For example, as a detective on the phone learns that the killer he let escape has killed again, the camera pushes in on him, deepening the dramatic moment and showing us his reaction in a closeup rather than a medium shot. Or, as the angry boyfriend breaks up with Sarah on the phone, the camera pulls out to show her crying all alone on the soccer field, showing us how alone/isolated she feels.

Jib Up/Down - This is when you move the camera up or down in a shot. This isn't the same as tilting obviously. Jibs can be used to combine multiple shots into a single take or to provide dramatic beats. For example, in The Departed, when the protagonist first enters the police HQ, the camera jibs up while he goes up the stairs. Later, when he's a corrupt cop and trying to cover his tracks, the camera jibs down as he runs out of the HQ. In this case, the camera's jib movement indicates a literal rise to power followed by a fall from grace.

Tracking - The camera will 'track' a subject. This could be a person, an object, a vehicle, etc. The Shining for example is famous for its tracking shots (in fact, the Steadicam was essentially invented for this film). Tracking shots connect us to a character or subject and allow passage through the environment.

How To Practice

So! You know about some of the rules and conventions in composition. Now how do you apply this and improve your skill? The first answer you'll always get is to 'shoot more'. For some, this isn't feasible due to budget, lack of crew, actors, locations, etc. For those people who find themselves stuck in a rut with no films to cut their teeth on, here's my advice! My dad, who was also a cinematographer, taught me this when I was a kid. This is how I learned composition without needing to make movies constantly:

Take your camera and tripod (if you have one) to an interesting place like a park, beach, plaza, etc. Once you're there, follow these steps:

  1. Pick a spot to plant yourself at random
  2. Without moving from this spot, find 5 interesting frames with your camera and record them. You can move up and down, swap lenses, play with exposure, etc. but you can't move yourself from where you and the camera are standing.
  3. Walk for a few minutes and pick another spot at random.
  4. Repeat the process!

Do this for at least an hour! A lot of the frames you'll find will be unimpressive and boring. But some of them will actually be pretty pleasing. As you repeat this exercise, you'll begin to develop an intuition for how to photograph a space and subjects. You'll likely find yourself frustrated with your random spot, thinking 'Man if I could just move 3 feet over there then this shot would be awesome!' This is exactly what we're aiming for! It's an indication that you're improving in your compositional skill already!

Once you've got a good handle on this, it's time to start practicing more emotional themes. Play with your exposure and focal length. Get into color grading and experiment with how colors change the mood of the image. You can repurpose the original exercise, but instead what you'll want to do is pick a random subject, like a statue, a tree, a mailbox, an interesting sign, etc. Now try to take two pictures of the subject, each embodying a different emotional theme. The ones I prefer are:

  • Happy / Uplifting / Optimistic / Safe
  • Sad / Morose / Somber / Depressing

Once you've got this stuff in the can (so to speak), it's time to start finding movies to work on!



6. What Books Can I Buy On Cinematography?

This is a surprisingly common question on this sub! Here's a list of the books most often recommended to novices and professionals alike:



7. What Blogs/Channels Can I Follow To Learn Cinematography?

There's quite a few out there, so instead of listing them all I'm just going to list the ones that are well regarded enough to become part of the standard carousel of recommendations on this sub:



8. Common Terms In Cinematography

Camera Specific

  1. Resolution - This is how many pixels your recorded image will have. If you're into filmmaking, you probably already know this. An HD camera will have a resolution of 1920x1080. A 4K camera will be either 4096x2160 or 3840x2160. The functional difference is that the former is a theatrical aspect ratio while the latter is a standard HDTV aspect ratio (1.89:1 vs 1.78:1 respectively).
  2. Framerates - The standard and popular framerate for filmmaking is called 24p, but most digital cameras will actually be shooting at 23.976 fps. The difference is negligible and should have no bearing on your purchasing choice. The technical reasons behind this are interesting but ultimately irrelevant. Something to look for is the camera's ability to shoot in high framerate, meaning anything above the 24p standard. This is useful because you can play back high framerate footage at 24p in your editor, and it will render the recorded motion in slow motion. This is obviously useful!
  3. Data Rate - This tells you how much data is being recorded on a per second basis. Generally speaking, the higher the data rate, the better your image quality. Make sure to pay attention to resolution as well! A 1080p camera with a 100 MB/s data rate is going to be recording higher quality imagery than a 4k camera at a 200 MB/s data rate because the 4k camera has 4x as many pixels to record but only double the data bandwidth with which to do it. Things like compression come into play here, but keep this in mind as a rule of thumb.
  4. Compression - Compression is important, because very few cameras will shoot without some form of compression. This is basically an algorithm that allows you to record high quality images without making large file sizes. This is intimately linked with your data rate. Popular cinema compressions for cameras include ProRes, REDCODE, XAVC, AVCHD. Compression schemes that you want to avoid include h.264, h.265, MPEG-4, and Generic 'MOV'. This is not an exhaustive list of compression types, but a decent starter guide.
  5. ISO - This is your camera sensor's sensitivity to light. The higher the ISO number, the more sensitive to light the camera will be. Higher ISOs tend to give noisier images though, so there is a tradeoff. All cameras will have something called a native iso. This is the ISO at which the camera is deemed to perform the best in terms of trading off noise vs sensitivity. A very common native ISO in the industry is 800. Sony cameras, including the A7S boast much higher ISO performance without significant noise increases, which can be useful if you're planning on running and gunning in the dark with no crew.
  6. Manual Shutter - Your shutter speed (or shutter angle, as it is called in the film industry) controls your motion blur by changing how long the sensor is exposed to light during a single frame of recording. Having manual control over this when shooting is important. The standard shutter speed when shooting 24p is 1/48 of a second (180° in shutter angle terms), so make sure your prospective camera can get here (1/50 is close enough).
  7. Lens Mount - Some starter cameras will have built in lenses, which is fine for learning! When you move up to higher quality cameras however, the standard will be interchangeable lens cameras. This means you'll need to decide on what lens mount you would like to use. The professional standard is called the PL Mount, but lenses and cameras that use this mount are very expensive. The most common and popular mount in the low level professional world is Canon's EF mount. Because of its design, EF mount lenses can easily be adapted to other common mounts like Sony's E-Mount or the MFT mounts found on many Panasonic cameras. EF is popular because Canon's lenses are generally preferred over Sony's, and so their mount has a higher utility.
  8. Color Subsampling - This is easier to understand if you think of it as 'Color Resolution'. Our eyes are more sensitive to luminance (bright vs dark) than to color, and so some cameras increase effective image quality by dedicating processing power and data rate bandwidth to the more important luminance values of individual pixels. This means that individual pixels often do not have their own color, but instead that groups of neighboring pixels will be given a single color value. The size of the groups and the pattern of their arrangement are referred to by 3 main color subsampling standards.
  • 4:4:4 means that each pixel has its own color value. This is the highest quality.
  • 4:2:2 means that color is set for horizontal pixels in pairs. The color of each two neighboring pixels is averaged and applied to both identically. This is the second best quality.
  • 4:2:0 means that color is set for both horizontal and vertical pixel 4-packs. Each square of 4 pixels receives a single color assignment that is an averaging of their original signals. This is generally low quality. Here's an example graphic I made for a class I taught. For more info on color subsampling, check out this wikipedia entry
  1. Bit-Depth - This refers to how many colors the camera is capable of recognizing. An 8-bit camera can have 16,777,216 distinct colors, while a 10-bit camera can have 1,073,741,824 distinct colors. Note that this is primarily only of use when doing color grading, as nearly all TVs and computer monitors from the past few decades are 8-bit displays that won't benefit much from a 10-bit signal.
  2. Sensor Size - The three main sensor sizes you'll encounter (in ascending order) are Micro Four-Thirds (M43), APS-C, and Full Frame. A larger sensor will generally have better noise and sensitivity than a smaller sensor. It will also effect the field of view you get from a given lens. Larger sensors will have wider fields of view for the same focal length lenses. For example, a 50mm lens on a FF sensor will look roughly twice as wide-angle as a 50mm lens on a M43 sensor. To get the same field of view as a 50mm on FF, you'd need to use a 25mm lens on your M43 camera. Theatrical 35mm (the cinema standard, so to speak) has an equivalent sensor size to APS-C, which is larger than M43 and smaller than Full Frame.

Lens Specific

  1. Aperture - This is the iris in the lens which you can open and close to allow in more or less light. It is one of the primary determinants of both exposure and depth of field.
  2. F-Stop - This is the measurement of your lens' aperture opening, and specifically refers to the ratio of the lens' focal length to your aperture opening. Opening or closing your aperture by one 'stop' will double or halve the amount of incoming light, respectively. A smaller f-stop number indicates a wider opening, and thus more light being allowed into the lens. F-Stop numbers are standardized on a scale of alternating doublings. The standard scale is:
  • 0.7 | 1.0 | 1.4 | 2.0 | 2.8 | 4 | 5.6 | 8 | 11 | 16 | 22 | 32 | 45 | 64
  1. Fast / Slow / Speed - This refers to the widest available f-stop setting for the lens. A faster lens can open the aperture farther, which allows more light in than a slower lens. Fast lenses are useful when shooting in low-light situations, but can suffer from some significant drawbacks such as increased cost and aberration/loss of sharpness.
  2. Focal Length - This number indicates the angle of view your lens will supply. A higher focal length results in a narrow (or more 'telescopic') angle of view. Here is a great visual depiction of focal length vs angle of view. The exact number of the focal length cannot be trusted to supply the same angle of view on all cameras. This is because different cameras use differently sized image sensors. A smaller image sensor will use a smaller portion of a lens' projected image, and so the resulting picture will have a narrower angle of view. This phenomenon is referred to as crop factor and is outlined in more detail in Section 10.
  3. Zoom vs Prime - This is all about speed vs quality vs budget. A zoom lens is a lens whose focal length can be changed by turning a ring on the lens barrel. A prime lens has a fixed focal length. Primes tend to be cheaper, faster, and sharper. However, buying a full set of primes can be more expensive than buying a zoom lens that would cover the same focal length range. Using primes on set in fast-paced environments can slow you down prohibitively. You'll often see news, documentary, and event cameras using zooms instead of primes. Some zoom lenses are as high-quality as prime lenses, and some people refer to them as 'variable prime' lenses. This is mostly a marketing tool and has no hard basis in science though. As you might expect, these high quality zooms are very expensive.

The FAQ Is Continued In The Comment Stickied Below


r/cinematography • • 5h ago

Original Content I tried my hand at cinematography for the first time

50 Upvotes

My first attempt at cinematography! Shot on the OnePlus Nord CE 5 using Blackmagic Camera, across Delhi, India. I'm still learning the craft and experimenting with visual storytelling. Would genuinely appreciate your feedback and suggestions on how to improve!


r/cinematography • • 10h ago

Original Content Shots from Father Figures.

Thumbnail
gallery
17 Upvotes

r/cinematography • • 13h ago

Original Content War Short on R5C

Thumbnail
gallery
20 Upvotes

Hey, guys! Just wanted to share some frames from my first war-related project that I was director/dp/editor on. I will be dropping my full submission statement below.


r/cinematography • • 20h ago

Camera Question How is this effect achieved?

Thumbnail
gallery
56 Upvotes

I’ve seen a version of this a few times and always wonders how it’s achieved. The main thing boggling me is that he stays sharp when the streaks come in. At first I thought moving the lens in front of the sensor but I think that’s not it.

Link to post:

https://www.instagram.com/p/Df5AKsDkU8b/?img_index=5&evlk=bDZrZHdidnl2aHpv


r/cinematography • • 57m ago

Style/Technique Question Stabilizing footage shot with a manual anamorphic lens (DZO Arcana 45mm)

1 Upvotes

I've been trying to stabilize handheld shots that I shot on my Sony a7S3 with a DZO Arcana anamorphic lens but it has been a torture despite the footage only having minimal hand movement.

So far I tried built-in pixel based stabilization in Davinci, and gyro data based stabilization with Gyroflow. I built custom lens profiles for Gyroflow, multiple of them, specifically for the Arcana. And they do work to some extent but the stabilization is still nowhere near as good as Sony's Catalyst Prepare with compatible lenses (the Arcana is not...) and you can still see the jittery micromovements.

Any advice from the community here?


r/cinematography • • 1h ago

Other Cinematography Supercut

1 Upvotes

compilation of my best yet


r/cinematography • • 5h ago

Original Content I’m a cinematographer and built a subscription-free Director’s Viewfinder for iOS (Free to try)

0 Upvotes

Hey everyone,

Now this is out in the world I'd be grateful for a little feedback and other's experience.

I’m Andrew Rodger, a UK cinematographer in film and TV. With the help of clever friends, I recently built an iOS app called Optic: Director’s Viewfinder.

I got tired of juggling multiple apps for framing, sun tracking, and weather, and dealing with pin-app galleries when all I wanted was to AirDrop an annotated frame to a director.

We just pushed v1.4, which unlocks the core features for free (Alexa LF framing, a starter set of lenses, live sun tracking, and my everyday 'Action' LUT), so you can take it on a tech scout and test it out before deciding if you want the full catalog.

It does quite a lot all in one app:

Framing & Lenses: Offline database of 100+ cinema/digital camera gates and 300+ prime and zoom profiles (ARRI, Panavision, ZEISS, Leica, Hawk, Laowa, etc.) with anamorphic desqueeze and custom sensor/lens entry. You can swipe to step through primes or hold to smoothly zoom.

Sun Path & Weather: Live sun path overlay with date scrubbing to check golden hour and sun angles on location, alongside hourly Weather forecasts.

On-Set Analysis Tools: Experimental Moiré/aliasing risk overlay (calculated from your chosen sensor, resolution, and lens) and a lamp/LCD flicker detector that suggests safe shutter angles.

Clean Captures: Manual exposure and stills/video save straight to your camera roll with a clean metadata strip (camera, lens, focal length, frame lines, GPS, compass heading, and time—plus the sun path overlay if you want it).

No Subscriptions: Free to download and try; unlocking the full camera/lens library and extra LUTs is a single one-time purchase.

I’d love to hear what you think—especially from other DPs, and ACs. If there are specific sensors, lenses, or framing tools missing from your workflow, let me know and I’ll add them to the next update.

https://apps.apple.com/gb/app/optic-directors-viewfinder/id6819053886


r/cinematography • • 6h ago

Other Old IDX VL-2 charger flashing orange (Battery Fault) with IDX DUO-C190 — Normal compatibility issue?

1 Upvotes

​Hey everyone, trying to sanity-check a compatibility issue with my V-mount gear before buying another charger.

​I have an older IDX VL-2 2-channel charger (from around 2007) and an IDX DUO-C190 battery. Whenever I mount the DUO-C190 onto either channel of the VL-2, the status LED immediately flashes orange (Battery Fault) and refuses to charge.

​Here is what I've already tested to rule out a broken battery or charger:

​The DUO-C190 charges completely fine on a newer IDX VL-4X charger at work (solid red LED, no issues).

​The old VL-2 charger works and charges my third-party Beillen V-mount batteries without any problems.

​Cleaned all 5 pins on both the charger and the battery, and tried both channels.

​Is it normal for the older VL-2 chargers to not recognize newer DUO-C series batteries due to communication protocol/firmware differences? Has anyone else run into this exact issue, and can you confirm if an IDX VL-2X will definitely charge the DUO-C190 without issues?

​Thanks in advance!


r/cinematography • • 1d ago

Lighting Question Desperately trying to understand night scenes

Thumbnail
gallery
81 Upvotes

Any time I try and light a scene that's meant to look very dark/ middle of the night it looks so unbelievable. Definitely an issue with my grade as well. Any advice or resources on how to do this properly? YouTube has been tough to find anything super useful.


r/cinematography • • 18h ago

Style/Technique Question How can I improve?

Thumbnail
youtu.be
3 Upvotes

Hey, I’m completely new to filmmaking and this is my first time filming something with a camera and I have no experience in lighting, colour grading or editing and I just got myself a camera this week because I’ve wanted to do filmmaking and document my life as a racing driver. This is my first real video that I made in about 2 days (filming, editing and colour grading)

Camera: GoPro Mission 1 Pro ILS
Lens: Laowa 17mm f1.8

I shot the entire video in GpLOG2 in 10 bit and graded it in post (new to colour grading only been watching YouTube videos and I’d love to get some tips and honest opinions from professionals out there or from those who’ve knows how to do it) - I went for a sunset evening ish look

The choice of camera is it gives me more room to work with and can also mount it to a race car. It is an all manual focus camera. Lens is 17mm prime lens which acts as 50mm due to the crop factor.

I did not have a wide range of lenses to work with but this is what I did so far with what I had.

Lights:
Strip lights
Sunset lamp
Focus light

I didn’t buy anything, I wanted to create something with what I had rather than jumping into all the gear etc.

My question is, how can I improve in all aspects and what should I focus on first? I feel like I should’ve added my voiceover but I’m in between exams and racing so I’ve been busy and I just wanted to get a video out.

As for sound design, I muffled everything a bit to make it seem like everything is going on inside my head or that I’m thinking. Added muffled crowd noise to make it seem like my mind is heavy? Or disturbed.

What do you think could’ve been done differently in that video with those shots? How can I be better at carrying out the video?

I shot this entire video by myself using a tripod and a suction cup. I would set the manual focus and would record it using the monitor app on my phone.


r/cinematography • • 1d ago

Lighting Question amaran ray 120c

Post image
10 Upvotes

Anyone tried the amaran ray 120c ? How are they ? they look quite small and convenient as little lights to own. Paired with the spotlight.

I tend to always miss a little edge on product shots or to mimic a sun on a table. Feels nice to have in the kit. I was going for the aputure 80c but it’s much more expensive. Cheers


r/cinematography • • 16h ago

Other Microbudget filmmakers: Gaffer, Key Grip, or G&E Swing?

1 Upvotes

My gratitude in advance for your patience reading this//

TL;DR: First-time microbudget feature director seeking advice on whether I needed a G&E Swing, Gaffer, or Key Grip for naturalistic, character-driven lighting—and what prep/coordination to expect from experienced crew.

Project & Technical Specs I’m directing a self-funded, shorter-runtime microbudget feature—a 30-year dream project after a health scare—using owned gear (>>My CAM/AUDIO/Lighting Gear list<<) and a skeletal, dual-role crew. My style is intimate and character-driven, relying on naturalistic lighting (shaping daylight with diffusion, bounce, and negative fill, using practicals, and adding lights mostly at night). My gear is older, so I hired crew specifically to work creatively with what I own rather than paying kit fees.

What Happened I have 11 years in screenwriting/producing, though I haven't been on an actual set in 10 years and this is my first larger crew. My DP (a former AD who shot her own short) knew my gear list and spent months prepping the look, storyboards, and shot list with me. In September, I hired a G&E Swing to support her; he declined the script/storyboards, which I didn’t question, assuming he and the DP would coordinate.

  • Boundaries & Set Etiquette: Despite interviewing as a Swing, he ambushed me on Day 1 demanding Gaffer credit as the sole G&E person. Caught off guard, I agreed, assuming he’d still handle grip work. Instead, he brought unrequested lights, ignored grip duties, and offered to bring a volunteer Grip (whom I agreed to pay modestly plus gas/meals), though no one ever showed. He also cursed constantly and policed my directing calls—pushing me to call "reset" instead of "cut / back to one" so they could skip slating to save time (a habit the AD shared).
  • The Shoot: While we struggled with harsh sun during priority exteriors, he stayed inside pre-lighting a low-priority interior (my DP claimed he "wasn't needed outside," though they also clashed). Later inside with 30 minutes of daylight left, he aimed one harsh light through a window with no flags or bounce—arguing real sunlight has harsh lines anyway and ignoring the soft look I’d prepped.

Having heard horror stories during interviews about abusive directors candidates had worked for in the past—and unsure if modern creator-economy sets have abandoned traditional slating/set norms—I held back my authority to observe rather than risk blowups while managing a health setback. When the behavior repeated two weeks later at our farm location, I paused production. I’m currently consulting a veteran regarding my AD and seeking G&E perspective here to reset expectations.

Self-Assessment

  • Did right: Scheduled test scenes early, paused production instead of burning budget on the wrong look, and prioritized creative light control over kit rentals.
  • Did wrong: Assumed my DP and G&E prepped together and shared my gear list without verifying, and didn't shut down the Day 1 title ambush or set oversteps immediately.
  • Need help with: Enforcing accountability and properly staffing/managing a one-person G&E department moving forward.

Questions

  1. For a naturalistic, intimate style (available light, diffusion, negative fill, bounce, practicals), which single role should I have hired: G&E Swing, Key Grip, or Gaffer?
  2. Isn't a Gaffer strictly head of Electric, rather than the entire G&E department?
  3. Should a G&E Swing handle basic grip work alongside lighting, and does being the sole G&E person automatically make someone a Gaffer?
  4. What gear assessment and prep coordination should I expect between a DP and G&E lead before Day 1?

r/cinematography • • 16h ago

Lighting Question What point-source lights do you use to light your scenes?

0 Upvotes

Good afternoon! I'm a stills photographer, but I learned everything I know about composition and lighting from cinematographers. I find myself wanting a few things when using my current lighting setup:

What I'm currently using:

- Amaran 150c (primary source of light)

- Aputure MC (fill/accent light)

- Amaran Ace 25x (another fill/accent light)

What I wish I had:

- V-mount batteries.

> My 150c needs a standard AC port to run, so I have an Anker battery brick that I haul around that powers it. I mean... it certainly works, but it's not fun. I got that before the 2-bay battery adapter existed, so I've since considered switching... but that looks like a different logistical annoyance.

- greater adjustment of lighting curve/power level

> Sidus Link app allows me some granular adjustment of lighting power for MC-- I.e.: "0.1% power." Being able to do this on all of my lights/most of my lights would be awesome... also... for whatever reason, the Study Link app is really fickle-- sometimes it's the MVP of my shoots-- other times? Completely useless-- doesn't work at all for any of my lights.

- weather sealing

> I live in Florida, so wet is a constant in life. I'm not asking for a light to be submersible-- I just want to know that I can realize it's starting to rain, and I have enough time to pack everything up before the rain gets too heavy.

- durability

> I understand something has to give somewhere to get to the price range I want, and if this is that corner that needs to be cut, then so be it. However, I've only had my light blow over once while shooting on-location, and that one drop was enough to crack the housing on my 150c. It'd be nice to have something that could survive more than one fall, but again, I understand if this is asking for too much.

What I considered:

- Amaran 200x S-- then Amaran Halo 200x when AI realized the former was discontinued.

> While the older model can use the adapter bay made by Aputure, the newer "Halo" models cannot, thus meaning I'm still slaved to a battery brick and a cable

- Aputure 80c Storm.

> It's a little above the price range of what I want to spend, seeing as photography is more hobby than business, but it's not too bad. Biggest turn-off is the proprietary "mini bowens" mount (or whatever it's called).

- Aputure LS 60x.

> Honestly? I'm just not familiar with it. I'm familiar with COB lights-- not the fresnel-looking focusing ability. I'm not opposed to it-- I'd just have to become educated on a few things to see if it's a specialty piece of lighting or something that's general-purpose. I really want a projector attachment for portraits, and I'm not sure how these two interact. Again, I don't love the need for a bowens adapter, but one exists, so I shouldn't have any problems. Only potential concern is the output. Sometimes in brighter daylight settings, I wish I had a bit more lux than what the 150c gives me (~16k). While the LS 60x nearly doubles the 150c's output in a specific setup, there isn't any other data available about peak output.

That's it. I was about to start googling random brand names I could remember when I decided posting here first is probably a good idea.

TL;DR:

- I want a point-source light that can use V-mount batteries, has a normal bowens mount, offers more flexible power level control, and offers some weather resistance.

- while I'd prefer a color light, gels aren't the end of the world, and I'm happy with a white light.

So what lights would you recommend?


r/cinematography • • 20h ago

Career/Industry Advice New to film and learning to grade. Would love to grade a project for free

2 Upvotes

Hey. I'm a DP in Miami. I just started shooting 16mm this year and I've never shot 35mm at all, so most of my film experience is still ahead of me. What I do have is years behind a camera and a lot of hours in Resolve, and now I'm learning to grade film scans properly.

Problem is, I barely have any film footage of my own to practice on. So if you have scans sitting around (16mm, 35mm, Super 8, whatever you shot) and you don't mind a student of the craft touching them, send me a scene. I'll grade it for free and send back a ProRes export and a few stills. Yours, no strings.

Only ask: let me post a before/after with credit to you. Rather keep it private? Fine, tell me and it stays between us.

DM me a Drive or Dropbox link. ProRes or uncompressed scans if you have them, and nothing already graded, I want the raw scan to learn from. I can take 5 people to start and I'll turn each one around in about a week.

And be honest with me when you get it back. I'm doing this to learn, so "the skin looks green and you crushed the blacks" helps me more than "looks great." Down the line I'd love to do this for paid work, but right now I just need reps.


r/cinematography • • 20h ago

Lighting Question Young filmmaker looking for advice on building cinematography skills and getting on set

2 Upvotes

Hi everyone,

I’m a teenager with a strong passion for filmmaking and cinematography, and I’m looking for advice from working professionals on what my next steps should be.

Right now, I shoot on a Panasonic AG-AC8 shoulder camcorder. Since it has a fixed lens and a smaller sensor, I want to focus on mastering the fundamentals I can control—like composition, camera movement, and lighting—rather than worrying about upgrading my gear.

For those of you working in the industry:

  • What specific lighting or framing exercises would you recommend practicing with a setup like this?
  • What are the best ways for someone my age to start getting real-world experience or shadowing on local sets?
  • Looking back at when you started out, what habits or skills made the biggest difference early on?

Thanks in advance for any insight you can share!


r/cinematography • • 17h ago

Color Question What the best picture profile/way to match Sony zve10 and a Sony fx30

1 Upvotes

Hello! I’m a videographer who mainly shoots music videos and live gigs.
I’ve recently upgraded from the Sony ZV-E10 to the FX30, and I’m absolutely loving it. However, I’d still like to use my ZV-E10 as a B-camera for shoots, but I’m having a bit of trouble getting the two cameras to match.
I usually shoot S-Log3 on my FX30 and I’m quite comfortable with colour grading in DaVinci Resolve. The problem is that the 8-bit footage from the ZV-E10 doesn’t hold up particularly well when shooting Log, especially when I start pushing the grade.
I’ve been considering switching to PP6 (Cine2) on both cameras as a bit of a middle ground, but I’m not entirely sure if that’s the best approach.
Has anyone had experience matching these two cameras? Would you recommend using Cine2 on both, or is there a better workflow for keeping the footage consistent while still getting the most out of the FX30?
I’d really appreciate any advice or recommendations. Thank you!


r/cinematography • • 1d ago

Lighting Question Herzog Lighting Choices

Thumbnail
gallery
164 Upvotes

Queen of the Desert has some lighting choices that don't seem, well, for lack of a better word...good.

Is this another example of the The Flattening across all modern cinema or is it Herzog's 'good enough' run&gun style or wanting a natural light look?


r/cinematography • • 19h ago

Lighting Question Wireless police lights

0 Upvotes

I’m shooting a film where a character is arrested, we need wireless strobe lights that flash red and blue that will be off screen for relatively cheap. Send any links or any ideas for how to do this.


r/cinematography • • 9h ago

Style/Technique Question From Drone to News Camera | Greater Chicago Food Depository | Cantito #8 The 2 Camera Stitch Intro (Part 1)

0 Upvotes

Let me know what you think


r/cinematography • • 1d ago

Camera Question Any users of OSEE Megamon 15 (not 15S) here?

Post image
2 Upvotes

Recently picked up the 1000 nit Megamon 15. Wonder if anyone has the best calibration settings they have worked out?

Also any quirks to note with this monitor?


r/cinematography • • 23h ago

Camera Question Cancel Sony A7 V + 24-70 GM 2 for DJI 4P? Just purchased

0 Upvotes

Doing the numbers it seems very expensive to get this camera lens cage, gimbal, CF express card etc about 5K in total. It's a big investment with the aim for content creation and to get paid work.

I placed the order yesterday, thinking to cancel it and buy a DJI 4P instead.

I want to film YouTube, social media content - travel vlog, cooking at home, self tapes/acting and eventually cinematic short films. And get paid work for photography and videography, the paid work aspect was my reason for this camera and lens, but I'm starting to think it's a very big investment with potentially low ROI.

I do consider resale value will hold but wondering if I should cancel the order before it's late and get a 4p for personal use instead

What do you think?


r/cinematography • • 23h ago

Other Any good black friday gear sales?

1 Upvotes

Any particular good black friday deals on amazon, bh, etc...