r/computerrepair • • 12h ago

Help Request Laptoo motherboard burn issue, technician failed to fix and probably made it worse. Any way to salvage?

Post image
3 Upvotes

Laptop model Acer predator helios neo 16.


r/computerrepair • • 5h ago

Hardware Issue Laptop Screen / Lid Broken - Any Solutions?

Thumbnail
gallery
1 Upvotes

The hinge on one side of my MSO laptop seized and when i tried to close the screen/lid it snapped it clean off. The hinge element is so stiff and hardly moves.

I don't think there is anyway to get it back to how it was.

I'm unable to get the bit that sticks out at all. My idea initial idea is to multitool saw the broken bit off, so at least the lid closes properly.

Am I correct in thinking that the connection to the laptop is in the other hinge? As from what i can see there is nothing else is connected. I want to try and sort the broken hinge as all of the strain is now on the good working hinge.

Any ideas / solutions?


r/computerrepair • • 7h ago

Help Request Laptop keeps making weird noise and I have no idea what it could be

1 Upvotes

It's a Lenovo IdeaPad 330-15ICH. Every once in a while it makes this sound (hopefully the link works). I don't think there's really anything triggering it as it happens both while idle and under load, but it started happening maybe around two years ago, not before that. I did have it cleaned recently as I thought that may be it, but it still happened, so now I have no idea. Sorry if this is a stupid question, I'm not a tech person at all.


r/computerrepair • • 11h ago

Laptop screen froze (mouse wouldn’t move) turned off and back on but now the screen stays just black..

1 Upvotes

Was filling in an online job application and the ai wasn’t working so I got angry, balled my fist, and BARELY smashed the bottom right of my laptop.. the mouse stopped moving and the screen was stuck so I just tried turning it off and on and yea.. the screen stays black but the fan comes on and everything. I have a hp omen


r/computerrepair • • 16h ago

[System76 Serval WS / Clevo P775TM1] Rapid CPU heatsink heat-up + silent power-cycle loop (no POST/beeps)

1 Upvotes

Hey everyone, looking for a quick sanity check from folks familiar with the System76 Serval WS (****`serw11` / Clevo P775TM1) desktop-replacement chassis before my thermal paste arrives tomorrow.

I am working with gemini on troubleshooting this. The laptop has been stored in my room and turn on about a year ago.

Specs & Age:

* Chassis: System76 Serval WS (`serw11` / Clevo P775TM1, \~8 years old)

* CPU: Socketed desktop Intel Core i7-8700K (95W)

* GPU: MXM module

* RAM: Corsair Vengeance DDR4 SO-DIMMs

Original Symptom:

* Laptop wouldn't POST—keyboard backlight comes on, fans spin at medium speed, no beep codes, no display output.

* Within several seconds of pressing power, the CPU heatsink (`6-31-P77FN-101`**)** gets scorching hot to the touch (too hot to keep a finger on), while the MXM GPU heatsink stays cool, and then the system shuts off and power-cycles.

What I've Checked & Done So Far:

  1. Replaced the 8-year-old CR2032 CMOS battery under the keyboard and did a full EC/power drain (same symptom persisted).
  2. Pulled the CPU heatsink: Found severe thermal paste dry-out / pump-out—almost the entire center of the i7-8700K IHS and copper coldplate had bare metal-to-metal contact with a thick ring of squeezed-out paste around the perimeter.

Does this look like I am going in the right track ?


r/computerrepair • • 21h ago

Il mio computer ha un utilizzo e la temperatura della cpu senza senso e va a scatti

Thumbnail
gallery
1 Upvotes

Praticamente un mesetto fa per qualche strano motivo (non ho scaricato niente o altro) il mio computer ha cominciato ad andare a scatti, ad avere temperature alte e la cpu che cerca di gestire programmi in continuazione e si bloccava ogni 5s, l'ho pulito dalla polvere tutto quanto, ho fatto anche ripartire il tempo in attività e sembrava andar bene, ed è stato così fino ad ora, adesso ha ricominciato ma con le prestazioni ancora più sballate, l'unica cosa che non si blocca ma è proprio lento con sbalzi della cpu senza motivo anche a 100% x 70gradi solo con il desktop, di norma la cpu sta tra i 18 e i 35 di percentuale e tra i 40 e i 60 gradi.

Poi anche il disco ha sbalzi a caso dal 8% al 100% e la ram sta ferma si 10/11Gb (ho 16Gb), la scheda video sta tra lo 0 e il 6% di utilizzo ma sempre a 32%.

Io per carità ho un preassemblato del hp (lo so è una merda ma quando l'ho comprato non lo sapevo) e alla fine non fa manco così schifo come Hardware (essendo un preassemblato è ovvio che non è il top) però nemmeno così schifoso e nulla non so cosa fare, se posso risolverla io sennò lo porto in un centro assistenza e quando sarà lo cambierò ma momentaneamente qua sopra ci lavoro (faccio il fotografo), spero che qualcuno può aiutarmi ToT


r/computerrepair • • 22h ago

Was my laptop repaired correctly - Samsung Galaxy Book3 360

Thumbnail
gallery
1 Upvotes

Laptop was sent for repair as it had liquid damage.

It was returned “working fine”.

Laptop now boots to bios but shuts down repeatedly during window installation and on the desktop.

It has no track pad or keyboard functionality on the desktop (keyboard works in the bios).

Power LED was cycling red, green, blue (charging, charged and on) before service and is now stuck blue.

The technician told me that as I had removed the SSD the laptop could not be tested.

He also folded the sub to main board FPC. Apparently “you can bend that flex to 360 1000 times and it will still be fine”.

  • Could he not have tested with another SSD or flash drive etc.
  • Can the Samsung BA41-02967A static FPC really be folded sharply like this. (Aivon and jlcpcb don't seem to think so)

Any information or advice would be greatly appreciated as I have paid good money for this repair and my wife is quite upset to be without her work laptop for so long.