r/crboxes • u/generic-gamertag • 1h ago
You really can make these out of anything
r/crboxes • u/generic-gamertag • 1h ago
r/crboxes • u/leakyleaky67 • 22h ago
I’m not a woodworker or stainer by any means, but I wanted to try and make this one better since it was in the living room.
My last post containing parts info in comments
r/crboxes • u/Grouchy_Piccolo_3981 • 14h ago
Or does it really matter? Just any Amazon brand work ok?
r/crboxes • u/Grouchy_Piccolo_3981 • 1d ago
I have two of these in my basement bedroom/3D printing shop and I have alot of dust and dog hair and I have two of these in different corners of the basement to circulate the air around. I was thinking why not build a filter box around them so it cleans the air while they run anyways.
r/crboxes • u/drazil100 • 2d ago
I have posted about this box before but I wanted to give a quick update on some of the changes I have made. First, for whatever reason, I decided to upgrade from the Arctic P12 to the Arctic P12 Pro PST. The fan noise was… annoying to say the least. And to make matters worse, the fan speed control on power supply I had previously bought was voltage based rather than PWM based meaning it was almost useless for controlling the new fans.
I ended up looking all over Amazon for a PWM controller and I ended up taking a chance on this one despite it only having 24 reviews and being rather pricy compared to alternatives. I liked the way it looked and assumed it would be fairly easy to mount so I gave it a shot.
It took me a few tries to figure out how I was going to mount it. I originally tried to mount it internally through a square cutout with double sided tape to the face of the controller (last photo), but that was a terrible idea and it fell into the box after only a couple days. I just now traced around it with a pencil and cut out an opening the exact shape of it in an attempt to press fit it in and that worked WAY better. Added some packing tape to the inside for added security but it was tight enough that I probably didn’t actually need tape. Unfortunately the ports for the controller are up flush to the face of the controller rather than the base so I had to have it protrude out and expose the fan cable, but overall I think my current solution looks clean AF.
Overall the box seems to be working based on a cheap air quality monitor recommended by housefresh. I don’t know how accurate this monitor is compared to the more expensive ones, but it does at the very least give me the ability to ballpark whether the CR box is working, or whether it’s not keeping up.
Here is the guide I followed for constructing my box if anyone is interested:
r/crboxes • u/Fluffy-Size-8881 • 2d ago
Hello all, I’ve been silently watching in the background for a while, I have a levoit air purifier in the bedroom and it’s ok, filters are ridiculously expensive so I’ve been looking to replace it with a shark never change 5, it’s about £100, filter lasts supposedly 5 years (probably not) but would a diy pc fan build be better? I’d appreciate any experience/opinions, thank you for reading
r/crboxes • u/sourbirthdayprincess • 3d ago
Remember when we were kids and you’d declare “It’s Opposite Day! Yes means no and up means down!” Well, that’s my life rn.
I live above a heavy cigarette smoker. I have severe asthma. The eviction process is slow.
I have sealed all baseboard crevices, but there are two places the smoke pours in:
Ceilings are only 7.5’ if that matters.
I am not handy so fabricating a CRbox is not an option, but the issue I see with the pre-fabs, and an issue I’ve been having with my current air filters (there are five running) is that when they blow the “cleaned” air upwards, it disperses the cigarette air coming from above even more broadly, worsening my breathing.
I am looking for a purifier that instead of having the filters on the sides or back and the fans on the top, has the filters on the top and fans on the sides.
Does such a unicorn exist?
Started lurking a week ago, I'm sold on making a CR box.
Anyone from the EU that has ordered some parts or a whole kit? Most of the stuff I find is US-exclusive it seems.
r/crboxes • u/Due_Refrigerator_300 • 5d ago
I posted about making a battery one for my dog grooming room to save on power if possible. I’m not sure if it will be enough but I’ll give it a go
Really hoping it can work as it will be nice
I tried to hold a paper towel against the sides but not enough to hold it
I’m assuming it should?
I’m new to these
But at least I think one of these could work in the house
Just not as well for this application maybe
r/crboxes • u/Atmosphery2255 • 6d ago
For anyone planning to build a PC fan CR box, it's important to have a PWM controller. That's what most modern consumer PC fans use to control the fan speed. I bought 2 of these on Amazon for ~$10. It can handle 12V or 24V circuits at 5 amps. That is more than enough to run 10+ fans at full speed. The control is super fine and it has changed the game for me. Also this is my first CR box with numerous modifications. (That's why there is tape patching holes everywhere) Link to PWM controller: https://www.amazon.com/dp/B0GVMCCZMX
r/crboxes • u/Covidivici • 6d ago
r/crboxes • u/insulinworm • 6d ago
Hi guys
I have a cr box set up with a 20in box fan and 4 filters. The only problem is my apartment is small and its just always in the way, so since we got a new roommate we havent been using it hardly
I was doing some reading and was going to get a 4in single filter to attach to the fan, with it being so much smaller it would easier to run it continuously so i feel like that would offset the efficiency of having a better filter that isnt being used often
Is a 4in merv 13 filter with maybe some cardboard to make a gap between the box fan and the filter the way to go? Or would one of those PC fan boxes be a better setup? I dont know as much about those
We live by a busy road in LA, and have 3 cats, so there is always just so much dust and particles
Got a recommendation to check out https://cleanairkits.eu/collections/air-purifiers, and the prices seem absurd.
500€ for a box? 100€ for a filter and 150€ for a carbon filter? 20€ for a power adapter? 175€ for a steel mesh? 70€ for a fan controller?
Seems that all these prices have almost a 5-10x markup.
r/crboxes • u/Constant_Lynx1739 • 8d ago
Hoping someone can help me figure this out, because I've now had two different box fans start giving off a burning smell in my Corsi-Rosenthal box.
The setup:
- 4 filters forming the walls of the cube, plus cardboard covering the bottom
- Filters: Kirkland Signature 2200 MPR (MERV 13) from Costco, 20x30x1
- Fan sits on top, blowing up and out, so air pulls in through the filters
- Airflow arrows on all filters point the correct way
- Filters are still pretty clean, no visible dust buildup
The fans:
Both ended up with the same problem: burning smell from the motor and weaker performance. They lasted about a month or sk each, running 24/7 on high.
From what I've read, 4 filters in parallel should be pretty easy on the motor, so I don't get why I'd be overheating fans. Is 20x30 vs 20x20 changing something? Is 1" filter thickness the issue? Bad luck with cheap motors? Something about my build I'm missing?
Open to switching to a PC fan top if that's the real answer, but I'd love to understand what's killing these first. Thanks!
Edit: just picked up a new Lasko. Let's see how this one does.
Edit 2: I think the filters themselves might smell like smoke from the first fan that burned up and I mislabeled that as the second fan smelling too. Running the new one for a while to diagnose further.
r/crboxes • u/ProjectorLens • 9d ago
This is a Model B Charcoal Kit from The3DHandyman. It uses 20x30 Filtrete 1900MPR filters with an 8” charcoal canister attached to a Cloudline S8 by AC Infinity. The thing attached on top is a duct silencer. It does wonders for the tone and volume. I use this to scrub the air in my smoking room and it does the job perfectly.
r/crboxes • u/Trick_Leadership4233 • 9d ago
After my earlier prototype I’m designing a fully printed version and want to check it’s worth building before I go further.
What’s fixed so far
• 436 × 436 × 430 mm, printed in PETG, no tape
• 4 × ARCTIC P14 Pro 140 mm PWM fans on the roof, 12 V
• Four 290 × 370 × 40 mm IKEA filters, one per side
What I’m planning for the smart version
• Built in Sensirion SEN66 sensor (PM1 to PM10, CO2, VOC, humidity, temperature)
• ESP32 running ESPHome, so it appears in Home Assistant with no cloud
• Auto mode that sets fan speed from the air reading
• Small screen on the roof showing air quality and fan speed
• Two buttons on the unit, plus control from HA
• Filter life reminder
• Possibly presence detection, so it runs quieter or stops when the room is empty
These images are renders of the design, not photos. The first parts are printing now. Nothing is measured yet; noise and a room decay test come next.
I’d really value answers on:
r/crboxes • u/FitJuice9835 • 9d ago
Built this one quickly for a very dusty jobsite where a lot of tile and stone was cut and polished. I plan to make additional versions with the corners shrouded to increase filtering and cardboard boxes as custom frames for fast filter replacement. The amount of dust loaded on the filters a month later was impressive but I didn't think to document it before they were disposed of. Original idea for my first single fan version taken from Matthias Wandel of woodgears dot ca.
r/crboxes • u/jhsu802701 • 9d ago
This is BY FAR the easiest air purifier to build. If you don't already have any air purifiers up and running, this one should be your first. It's loud, but it's exactly what you need when you're looking for a quick and dirty solution.
This air purifier is based on a 20-inch Lasko box fan, which is cheap and powerful. This is the tried and true 20-inch box fan. Other brands of 20-inch box fans I've tried are lower in quality. For one of the other brands of box fans I've tried, the stabilizing feet at the bottom were prone to falling off. Another brand of box fan had the power cord coming out of the back, which forced me to put the filter on the front of the fan.
The filter in this example is a 20"x20"x1" MERV 10 filter, the cheapest and most portable option. That makes this box fan air purifier cheap DIY knock-off of the Lasko FF305. For the maximum air cleaning ability, use a 20"x20"x4" MERV 13 filter. For an intermediate solution, us a 20"x20"x2" MERV 11 filter.
In the time it would take you to build the classic 20-inch box-fan-based Corsi Rosenthal box, you could build several of these single-filter box fan air purifiers. This box fan air purifier is also just as effective as some commercial air purifiers that are at least 10 times more expensive. You can use the money you save to build more air purifiers.
The main drawback of this box fan air purifier is loudness. PC-fan-based air purifiers address this issue, but building one involves more work. Build this box fan air purifier first, and then you can build quieter PC-fan-based air purifiers later.
r/crboxes • u/Complex_Original3526 • 9d ago
finding it impossible to find a 20" box fan, here, its bizarre. Anyone here know of any? Even on amazon the only one i can see is like 170€!
r/crboxes • u/GWest2385 • 9d ago
Are the CR boxes more powerful or do a better job than a hepa air purifier for a large room?
r/crboxes • u/Alphonso- • 10d ago
I had an extra Arctic P14, power supply and Shopvac HEPA filter that was the wrong size for my vacuum so I put this together. Not sure if it works very well, the filter might be to dense and it's not really a CR box I guess.
r/crboxes • u/rubix_jelly3 • 12d ago
Don’t judge me on the shroud LOL.
Found out about these while looking for air purifiers to help with smells from my cat and dust. Working great so far! I used MERV 11 20x20x1 filters. Did it for about $50.