r/dr650 • u/Acceptable_Ask_7624 • 16h ago
r/dr650 • u/Advanced-Frosting-80 • 15h ago
Fuel or carb?
I have a 94 dr650, I've recently purchased and its my first bike. When riding occasionally the rpms climb to 4k and stay there sometimes when I force the rpms to lower it idles fine, sometimes the bike doesn't even want to idle and just shuts off. I've set the petcock on all the settings (still the oem vacuum one) and i filled it fresh with 87. Could it be the petcock is slowly going out, bad fuel, bad vacuum? I've never dealt with something like this and im just confused
r/dr650 • u/Impossible-Cake-5341 • 13h ago
Leaking problem!?!?
My 2024 Dr650 seems to be leaking motor oil from the right bolt. Any idea what's happening or how to fix?
r/dr650 • u/blue_arrow69 • 1d ago
Anyone ever use one of these rotor guards? Are they durable?
Or is it just a waste of money?
r/dr650 • u/kindalightning • 2d ago
New Purchase
galleryThis is my first kind of bike ever and I have to say I dont think I could have picked anything better. Got the first ride out of the way earlier, gotta work on the takeoff and stopping but other than that this thing is a dream.
r/dr650
•
u/mudafukaYou
•
3d ago
Be careful out there
āSince there was no collision there was no crime committedā -Charlotte police department
Edit: I do really appreciate the criticism and I will adjust my riding to not let this happen again but, yāall need to enter the real world. Hindsight is 20/20. I avoided a crash and thatās all I care about. I hope you can claim the same achievement.
r/dr650 • u/bubblingpestilence • 4d ago
Pitbull trailer restraint for 2027 DR650S
Does anyone know if the pitbull trailer restraint will fit on a '27? On their website it says it'll fit on 08-22 but I thought this bike has been just about unchanged for the past two decades.
r/dr650 • u/Narrow_Limit2293 • 4d ago
3rd gear explosion catastrophe
Out of curiosity how many people have suffered a catastrophic 3rd gear explosion destroying the engine and leaving you stranded?
r/dr650 • u/Illustrious-Gene2309 • 5d ago
Cush hub bearing.
galleryHaving trouble removing my failed bearing. Do I need a proper bearing removal tool to drive it out?? I've tried heating the bearing/hub, pb blaster, punch and hammer. Won't budge, freeze it? Any tips or tricks? Many thanks.
r/dr650 • u/kindalightning • 6d ago
Is this a good purchase?
galleryI have a friend who is willing to sell this DR650 to me for $3,500. It has around 500 miles currently and is only a few years old. I am just coming up here to ask about opinions on the price and whether or not I should pull the trigger. As far as I know everything is in like new condition.
r/dr650 • u/Advanced-Frosting-80 • 6d ago
1994 dr650se(?) First bike
galleryThis is my first bike and im really excited to own it. So far i've done nothing to this but i plan on looking/replacing the clutches, brake pads, petcock, fuel lines, and fixing the rear brake light. So far from what I can tell the seat was redone with a softer foam and the brake fluid done last year (will do a proper flush later) Are there other things I should consider doing to make this bike more reliable? Also on the dash is the top mechanical odometer one for miles and the bottom one hours? (Sorry if its a really dumb question i just cant seem to find anything on it)
r/dr650 • u/Ok_Document4521 • 7d ago
New Upgrades Old Bike
galleryThe old DR got a new 8.3 rear shock spring, cleaned 10 or 20 years of grease off the counter shaft seal area, installed a counter shaft retainer, and a 14 tooth front sprocket. Much better for my riding. Took it out and got a little muddy while checking the fence after the flood.
r/dr650 • u/teeeebeeee • 7d ago
Do i need a new slide guide?
I'm rebuilding my carb and the 4 round wear indicators are perfectly visible, but the 2 notches at the end in the circled areas are not there at all.
The bike only has 10,500 miles on the clock. Is it common for it to be so worn after so few miles or did I get bamboozled and my new to me DR probably has more miles than what the odometer shows? Or did some guides not have those corner wear indicators?
Thanks
r/dr650 • u/felipe_mohu • 9d ago
Worth it? bad deal? What am I missing? 2006 14k miles $2700
galleryI am a new rider looking for a bike to commute 20 miles to work on mostly two lane back roads with some Fire roads mixed in on the way home. Perhaps some dirt adventures in the future, too. This bike is for sale near me and seems like a good deal but Iām not sure what to look for and want to make sure I get something that wonāt leave me stranded. Owner say miles are mostly freeway (which sounds odd) that the dr would be mostly freeway but I donāt know.
What do you say? Yay or nay?
r/dr650 • u/blue_arrow69 • 10d ago
Long shot but any Front Range Colorado DR650 owners have a spare clutch lever lying around?
I crashed a few days ago and need a new lever before a trip this weekend.
r/dr650 • u/DanaRoberts876 • 14d ago
Coming from street bikes, this motorcycle has taken me to more places in my own area then I wouldāve ever known
r/dr650 • u/MinimumEgg8542 • 14d ago
Broken Swing arm chain guard bracket
Hello everyone, the two little brackets that hold the chain guard on my 1998 DR650 are missing. I was wondering if anyone could provide me with measurements for those, as I would like to weld new ones on it. Thanks.
r/dr650 • u/Ghost-Actual-88 • 14d ago
Clutch cover leakā¦
Picked up a 13ā last year that needed some serious reconditioning⦠it had been very neglected. Leaks, pitted and bent wheels, chain links seized, etc.
Did a complete refresh of all maintenance. Replaced brake pads and did stainless lines. Upgraded all lighting to LED stuff. Threw a bunch of JNS protective stuff on there, cogent suspension, bypassed clutch and kickstand switches. I also took the clutch cover off to check the NSU bolts and thread lock them. The clutch cover gasket was SUPER fucking stuck on there, as was to be expected. I spent forever scraping and removing with a plastic scraper but it was a rough ordeal. Now after installing a new OEM gasket and torquing.. itās leaking very very slightly at the bottom seam. Anyone run into needing to replace the whole cover because of how bad the corrosion was on the gasket? Perhaps get a new gasket and do a light layer of FIPG on the cover side of the gasket? Just buy a new cover?
r/dr650 • u/Dr650mostly • 15d ago
Quick review video on the Xitomer front sprocket case saver
youtu.ber/dr650 • u/KingHenry6 • 17d ago
What would you pay? 2002 Dr650
2002 Dr650, 10k miles, Runs & rides, needs tires, overall good condition.