My Ride 25 years
r/e46 • u/Loud-Training9414 • 20h ago
Hey guys š my name is Joseph Iām 20 and I bought this e46 328i a month ago for 3 500$. itās used for sure, and was somehow in a bad condition but my uncles own a bmw spare parts company and they helped me alot with it,the repairs costed around 1 500$.I just needed some questions I felt I could be given an anwser here :
1- was that a good choice to buy it?
2- I felt that the wheels are harder than other cars (I used to drive my parents car a honda CRV 2003 and the wheels are much smoother)
3-Is it normal for the AC to automatically turn on ?
4-What best experiences do you recommend to enjoy this car?
Thank you very much and Iām pretty proud to be a part of the e46 community!
r/e46 • u/Overall-Present4338 • 23h ago
I had a piece of black lambskin leather lying around, so I decided to try my hand at re-wrapping the steering wheel on my E46 coupe. It was one of the most challenging DIYs I've attempted, full of painstaking trial and error. Making it from scratch was probably 8/10 difficulty. It's far from perfect, but overall I'm satisfied with the results.
r/e46 • u/ForceObjective1691 • 17h ago
330Ci
After an oil change, the oil level is slightly above the MAX mark as shown. Checked on cold and warm engine, not much of a difference.
Iāve already driven more than 100km and the car drives flawlessly.
To anyone that has had a similar experience: should I just keep driving and wait for the M54 to do its thing or should I address it and take some oil out?
Thanks!
r/e46 • u/BumFartPissWilly • 5h ago
I inherited a dark blue 320ci off a family member. Itās in a bit of a sorry state having been stood for about a year unused, luckily it was covered. Iāve a laundry list of bits to sort, but Iām most concerned about this rust patch on the right rear arch. Complete novice, what is the best way to approach this? Iām guessing I need to buff off the paint, and apply some rust converter. Any advice appreciated, thanks.
ride height update on red eibachs all settled down:
Defenitely a little lower than expected, but still not slammed.
Paired with front TA technix shocks and yellow bilstein b6ās in the rear, the car feels firm and confident (as much as possible on winter 205/55r16 tires), but soft on potholes and speed bumps. They get hard once you compress them a little (weight transfer while turning at speed)
I would highly recommend them to anybody who wants a good quality suspension for the low instead of buying cheap coilovers.
Cant wait to put 235/45 and 255/40r17 on her in the spring
Fun little commuter right there and im in it still for under ā¬2k š¤£
r/e46 • u/RoundSoftware9712 • 3h ago
Are these peanut butter cards?
r/e46 • u/Plenty-Series-6010 • 17h ago
BMW e46 330ci 2004 convertible does not start after trying to wire a flame kit(yes I know Iām a idiot)
After wiring it in the spark plug works fine but then does not turn over anymore
We removed the flame kit and brought it back to original but doesnāt even turn over now
Hereās what happens
- everything turns on
- fuel pump engages
- lots of clicks
- mostly a lot of jack shit
What Iāve done
- checked fuses
- checked lines
- checked continuity and voltage on most lines and battery
r/e46 • u/DisastrousCycle1104 • 4h ago
Hi, i have a problem that when i connect the maf the engine stalls, i tried to pull the battery, it didnt help. I replaced all the vacuum lines that leaked, even the rocker gasket.
When i try to disconnect maf the car works.
r/e46 • u/vegtelenbeno • 6h ago
Hello,
I have had to replace my fuel pump due to it making weird noises.
I bought a Magneti Marelli replacement, and after installation the fuel gauge is incorrect (goes down a lot after starting the car, shows correct level after letting it sit overnight). I read that not using the OEM level sensors could cause this.
But the biggest problem is that after installing the fuel pump and a few days have passed I have noticed a high pitched noise. The fuel filter was not replaced because I have managed to get an incorrect one, could that be the cause or the pump is faulty?
Thanks for your help.
r/e46 • u/OkCartographer1650 • 23h ago
Hi to my European friends!
Iām rebuilding my Vanos and have a hard time finding a good brand for seals and rattle kit. Iāve tried Dr.motor but didnāt like the quality. Our friends in the states has Dr.vanos and Beisan.
Any tips?
r/e46 • u/tomcollis999 • 26m ago
Hey guys,
My 2003 E46 is running roughly, stalling unless i give it some beans, sounds awful when Iām driving it and feels sluggish / lumpy.
Just happened as i was driving back from the shops - didnt notice it before?
Engine codes : P0171&74
Any help is appreciated!
r/e46 • u/Jaded-Night-3824 • 1h ago
Recently picked up a 2001 320i 2.2 automatic (M54). Car drives smoothly and cruises perfectly fine, but acceleration from a standstill feels quite sluggish. Revs climb normally and the engine revs freely, but it feels like itās lacking low-end power.
Iāve also noticed the idle RPM drops slightly when turning the steering wheel while stationary.
Wondering if this is fairly normal for the 320i auto or whether I should be looking at VANOS seals, vacuum leaks, MAF etc.
Anyone experienced something similar?
r/e46 • u/Economy_Pop9133 • 4h ago
Anyone have any idea whatās happened here?
For context, this is my BMW E46 Convertible. The electric roof doesnāt work, so I have to operate it manually.
I put the roof down earlier and, when I tried to put it back up, there seemed to be some resistance. I closed it again, reopened it and started using the Allen key locking point to secure it back into place.
However, when we looked up, we noticed that the locking point was covered by this
Does anyone know what this is, why itās happened or how to fix it? Any help would be appreciated!
r/e46 • u/Choice_Time6951 • 8h ago
When I used to get in my car, all of the interior lights would come on, but now my backseat left one doesnāt come on only comes on if I click it
r/e46 • u/darin_worthington • 9h ago
Been spinning my wheels here on the research of this part. I found that Valeo is the OE provider to BMW, however it's now NLA. While looking around on some of the BMW dealership websites, I get the E-36 FSR P/N 64116929540 which is still available. After looking at ECS Tuning, who normally has excellent photos, they appear to be the same shape and connector. Of course RealOEM doesn't confirm fitment, but some Ebay sellers says it does. While I would like to have an OE or OEM I just don't want to drop funds to experiment from the dealership at a tune of 165 bucks. I may just grab a cheap aftermarket to see, but even then I am not the kind of person to be doing this job twice.
Thank-you for any input folks!
r/e46 • u/Putrid_Difference272 • 18h ago
I recently bought a 2004 325XI project car. When I bought it, the carrier bearing was completely broken and the driveshaft was just dangling. I towed the car home, got it up on the jacks and replaced the carrier bearing, but when I went to start driving it afterwards, I realized the shifter was feeling quite rough and thought I may have damaged something getting it on and off the trailer.
I took it to an E46 specialist here in town and he informed me that the car had started off life as an automatic transmission and somebody along the way had swapped it to manual. He did not have this part in stock but informed me that if I got this intermediate piece, it would get rid of all of the rubbing and grinding of the linkage against the transmission tunnel. He also mentioned BMW discontinued that part about 10 years ago and that to find one Iād have to scour eBay or look for a donor car. So my question do you guys is, does anyone have this intermediate piece that I could buy from them?
Using the best of my Google abilities, I believe the part number is this BMW 51-47-8-265-928 .
Iām near Denver Colorado if anyone has one available to sell, please let me know. If Iām completely off base, Iām open to that feedback as well.
Thank you everyone for your time.