r/esspresso • • Jan 12 '23

r/esspresso Lounge

1 Upvotes

A place for members of r/esspresso to chat with each other


r/esspresso • • 5d ago

Frequent Los Nogales Mucilage curdling milk 🤔

Thumbnail reddit.com
1 Upvotes

Seeing if someone in this sub can shed some light.


r/esspresso • • 21d ago

Should I get the baratza Encore ESP?

1 Upvotes

Should I get the baratza Encore ESP? My budget is under $250. I want to get out of my coffee is I want to get buttery/Carmel notes out of Colombian and Brazilian medium roast coffees for espressos, Americanos and filter pour overs, I always have to add milk or half and half because the acidity is to much for my stomach, I like it when it tastes complex or full, I've had esspressos at places that are good boring or plain or watery and I don't like that, I've been watching some reviews on the baratza Encore ESP and it seems like that's the one that will get me the flavor profile I'm looking for, but I'm not super knowledgeable on grinders yet. I am aware that the retention is not that great. I don't care too much about if it's too noisy. I was told that it's good to clean it with an air compressor occasionally and I have an air compressor close to my kitchen already.


r/esspresso • • Sep 25 '26

How do I remove and replace the needles off my distributor? [Ikape W3 WDT tool stirrer distributor]

Post image
1 Upvotes

r/esspresso • • Sep 22 '26

Did anybody buy the Costco 10 in 1 Midea Espresso machine?

1 Upvotes

I am thinking of buying this espresso machine:

https://www.costco.com/p/-/midea-10-in-1-fully-automatic-espresso-machine/4000427849?langId=-1

Any other recommendations?


r/esspresso • • Sep 16 '26

Rookie machine. Bambino plus or lelit Elizabeth

2 Upvotes

Hello everyone.

A buddy warned me a year ago that there is a deep hole in espresso. Well, here I am haha. Ive lurked for a year, dipped my toes in when I was gifted this Phillips baristina thing. It does a rough job from what ive heard and just broke. Im ready to dive in.

Ive read a ton and decided to get the df64 grinder. Now for the machine I was originally thinking about bambino plus or lelit Elizabeth. I looked into the profitec go, but from what I read the lelit has more bells and has 2 settings and does pre infusion? Which I dont know much about except that it basically will pre infuse your coffee before pressing it, but I havent figured out quite if I need that or no.

So my question is, am I dumb just to jump to a cheap dual boiler or should I start with the bambino? Id rather not buy another one in 2 years. Id rather just get something now that'll last? But maybe thats stupid ha

Im open to any and all help!

Thank you for the help!


r/esspresso • • Sep 06 '26

New Gemilai coffee machine G3828A built in 60mm flat burr grinder

Thumbnail
youtube.com
1 Upvotes

Should i buy this machine since it has early bird price at $729 (original $859). I only found 1 video review this machine in youtube. What do you guys think ?


r/esspresso • • Aug 24 '26

Puck question

Post image
2 Upvotes

Hello,

I am trying to understand why this is happening: I have a 58mm bottomless portafilter and a classic 58mm one. I use the same amount of coffee for both, the same grinder, and the same grind setting. In short- everything is exactly the same. But every time I try to knock the coffee out of the bottomless one, the coffee falls out along with the puck screen?


r/esspresso • • Aug 16 '26

espresso shot too watery please helpp

5 Upvotes

ive only recently started my coffee journey but ive been only getting watery espresso what can i do to get creamy espresso ???


r/esspresso • • Jul 08 '26

Newbie struggling

1 Upvotes

Hello everyone. The setup is a Classic E24, stock except a new bottomless portafilter and slim drip tray, and a Eureka Facile with the ARO espresso upgrades.

Originally was getting (what I thought) was decent shots doing 18g in the double basket (advertised as 14g basket). But when I put on the bottomless portafilter, I saw channeling. Realized with 18 grams I could see the screw in the puck so have been reducing my dose down to 15g and grinding finer. Thing is, the shots keep getting worse. They are seemingly slow to extract (maybe 10 sec before I see anything going into the cup) but are thin, sour and have no crème. Lots of channeling too. And the puck is soggy, not dry. So I’m thinking I’m too fine, but then I start over dosing the basket. Don’t know what to do. Using Blue Bottle beans roasted about 3-4 weeks ago.

Thanks!


r/esspresso • • Jul 04 '26

I built an open-source tool that auto-reviews your GaggiMate shots with AI and suggests grind/profile tweaks

Thumbnail
reddit.com
1 Upvotes

r/esspresso • • Jun 10 '26

Is this a good shot of esspresso? Or did I do anything wrong?

1 Upvotes

I’m new to coffee machines, I got the Lepresso Semi-Automatic Coffee Machine 20 Bar, Capsule & ground Coffee Maker.

I didn’t measure the coffee ground but it’s was just a little bit lower than the max line in double shot filter. I used davidoff fine aroma ground coffee.

Can you tell me if this is a good shot of esspresso? Or how does it have to look like? Then I added milk and acid to make iced coffee, I didn’t add any other syrups.

To me it tastes exactly like cold brew with this type of coffee now I’m wondering what’s even the point of coffee machines?


r/esspresso • • May 27 '26

New to espresso, finally got a good looking extraction from my new Uphot.

Thumbnail
gallery
3 Upvotes

At least it looks like the extractions in the videos.


r/esspresso • • May 24 '26

Next machine?

1 Upvotes

I have a bambino at home that works well and a bambino plus at work that gets a lot of use and has steam issues. I’ll probably move my bambino to work and get myself an upgrade for home. Up to $1500… what’s the best machine that doesn’t need an engineering degree to operate.


r/esspresso • • May 24 '26

Spare part please

1 Upvotes

If anyone is able to helo me source a double esspresso basket for the dedica duo ec895 i would be very greatfull


r/esspresso • • May 19 '26

Struggling to get slower pulls

Thumbnail reddit.com
1 Upvotes

r/esspresso • • May 05 '26

Need help finding coffee

Post image
1 Upvotes

Went on deployment a few years back too Spain took this photo so I can get some didnt realize it was poor quality does this look familiar to anyone?


r/esspresso • • Apr 27 '26

Coffe Grinder for kitchen Aid

Thumbnail gallery
2 Upvotes

r/esspresso • • Mar 15 '26

What to buy

1 Upvotes

Hey all,

Wife loves cappuccino. Was thinking of getting her some machine to make them. What should I look for. Kinda don’t want to spend more than 2k


r/esspresso • • Mar 12 '26

Need help with Espresso shot

1 Upvotes

Hi guys.

New to making my own espressos

Need some help dialing in my grind size.

I’m using the breville gambino and a timemore whirly 01s portable grinder.

How is my pull? The pull looks a bit watery compared to the pulls I’ve seen on YouTube. Taste isn’t bitter tho. What can I do to improve?

Thanks!


r/esspresso • • Mar 09 '26

Complete beginner starting from scratch — is my setup good enough to make decent latte at home? (DeLonghi Dedica EC685 + Timemore C3 ESP)

2 Upvotes

Hey! I'm just getting into espresso at home and wanted to get some opinions before pulling the trigger on everything.

My plan is DeLonghi Dedica EC685 as the machine and Timemore C3 ESP as the grinder. On top of that I'll grab a proper tamper, some non-pressurised baskets (51mm) and a small scale.

Goal is mostly lattes — my reference point is Costa/McCafe which I know is not exactly specialty coffee, but honestly I love it and want to replicate that at home. I'm on a tight budget so this is roughly the best I can do for now. I don't want a super-automatic though, I actually want to learn and do it myself.

Main things I'm unsure about:

  • Is the C3 ESP actually good enough for espresso or will it become a bottleneck fast?
  • Any known issues with the Dedica I should be aware of before buying?
  • Am I missing anything obvious from the list?

Appreciate any advice, still very much a beginner here!


r/esspresso • • Feb 26 '26

Can you guys tell me what i do wrong?

4 Upvotes

I have a Delonghi dedica, used fresh beans (17 days since roast) 100% arabica, a tchibo 160w grinder set on the smallest grind for esspresso, used dwt, used a lot of pressure when tamping, 19g in 36g out in 20-23 seconds and the pull looks like this :(. Tried with 20g in 36g out and it pulled smoother and in 25-26 seconds. Is the grinder the problem? I spent 85€ on it because i do not have the budget momentarly. Is there any fix for this to try?


r/esspresso • • Feb 19 '26

Arcade coffee

Post image
5 Upvotes

Guys I did a thing. What y'all think?


r/esspresso • • Feb 19 '26

Looking for local coffee roasters for personal use

1 Upvotes

Any local roasters in Plano, Richardson, North Dallas Tx area for smal batch personal use purchase?


r/esspresso • • Feb 14 '26

Normcore 54mm Bottomless Portafilter Doesn’t Fit My Barista Touch Impress — Normal or Defective?

1 Upvotes