r/finishing • • 50m ago

Need Advice How to repair / re-finish my bonsai stand?

Thumbnail
gallery
3 Upvotes

Hi guys, firstly I’d like to apologise for being such a noobie when it comes to this subject. I’ve carried out quite a few basic artistic woodworking projects in my life but never finished to a high standard beside slop coat finises.

I picked up this bonsai stand for exhibiting some of my trees but I haven’t got a clue on how to remove the dents and water stains. Is it best to sand down and refinish the whole thing or spot sand and finish? Would I be able to match a stain to this? What sort of finish is already on it?

Again, I apologise for being so ignorant but I’d rather ask and not ruin it


r/finishing • • 2h ago

Question Which stain is this ? i think its pine wood, i bought this furniture from pan home

Thumbnail
gallery
1 Upvotes

r/finishing • • 3h ago

Waterlox original over satin?

1 Upvotes

I have a can of original and a can of satin, but I actually want the original semi gloss look. Can I use the satin under the semi gloss to not have to buy another Original can? Will I have any issues? I've heard some say the satin is less protective. Is the difference significant?


r/finishing • • 48m ago

Knowledge/Technique Need help on what to do.

Thumbnail gallery
0 Upvotes

r/finishing • • 21h ago

Could gel stain work on this bed?

Thumbnail
gallery
4 Upvotes

I want to repair it, but don’t want to sand down to bare wood or risk going through veneer. I know gel stain can be used on finished wood. Am I better off just spot treating with wood markers? I used gel stain on a dining table and it looked bad. I’ll include the picture. But for the table, I only gel stained a small section of it, so it was very obvious where the gel stain was because it was very opaque. If I gel stain the bed, maybe I’ll get better results if I gel stain the whole bed? Maybe I need to gel stain very lightly and wipe it off better? Has anyone had success with gel stain on finished wood as a way to repair scratches and discoloration?


r/finishing • • 19h ago

Painting on wood stain with stain showing

Post image
2 Upvotes

Hey all! reposting from beginner woodworking -

I’m reworking an old ikea wood table and need some help with the best protocol here. I’ve sanded and applied wood stain, no top coat yet.

The idea is to paint an art deco design while keeping the wood stain showing as the background, if that’s possible.

-Is acrylic paint appropriate for the design? People mentioned how water-based and oil don’t mix. Would I need to apply a clear primer coat (and what kind)?

-I planned to seal everything at the end with polyurethane, but that also begs the question if it should be oil or water-based PU depending on the paint type..

Thanks in advance, this is my first time doing something like this!


r/finishing • • 16h ago

Question How to remove Howard beeswax orange oil?

Thumbnail reddit.com
1 Upvotes

r/finishing • • 1d ago

does this cognitive post leave a scratch or dent? how's this for a psychological post?

0 Upvotes

so i work in a manufacturing company and have machine polished in the finishing associatee's department. people sending me dirty welded metal components of steel and/or aluminum which i would then polish or bead blast/sandblast to make the lifeless things presentable. dressing these lifeless inanimate things..and they get inspected and shipped when they pass the inspection they get assembled and often presented in shows like its funeral wake. i have often pictured polishing and bead blasting as like embalming metal and any boss we have in that case is like the funeral director. and the factory where the polishing takes place like the funeral home or mortuary.


r/finishing • • 1d ago

Stain wood before cutting for ring?

1 Upvotes

Hopefully this is the right sub for this question.
We are getting married and having custom rings made and are sending in wood that is personal to us to be used as material. The problem is the wood is willow which is pretty light and we are wanting it to be darker in the final product. We have to send in a piece of wood 3-6” long and at least 1.5” diameter. We already asked the jeweler and they will only use the wood as is when it arrives, they won’t stain it there.

Is there any solution that we could use to dye/stain the wood all the way through without ruining it so we know the final cut will be darker?


r/finishing • • 1d ago

Siding stain?

Thumbnail reddit.com
1 Upvotes

r/finishing • • 1d ago

Need Advice 70’s, Solid Wood Doors From The ReStore.

Thumbnail
gallery
8 Upvotes

I lucked out and got these two doors for a steal. They’re definitely in rough shape but for the price they were too good to pass up. I’ve been wanting to replace my entryway door and figured I could do my best to salvage these (assuming I can pull it off) and pick the one I like better.

I have a little woodworking knowledge and what I’d assume would be required tool wise. I plan on scraping the veneer, sanding down the surfaces with 80 up to 180 grit, doing my best to color match dowel fills for the holes, then prepping and staining.

I’m wanting to try a stain first to see how it turns out. If for whatever reason it doesn’t work out with the grain and visual quality I’m also okay priming and painting them solid colors. Any other advice when working on these era of doors?


r/finishing • • 1d ago

Finishing Rubber Wood Table

2 Upvotes

What’s the best finish for a freshly 3 grit sanded rubber wood table ?

What ways to avoid ?


r/finishing • • 1d ago

How to remove red wine stain from cabinets?

Post image
1 Upvotes

r/finishing • • 1d ago

Stain on Wooden Table

0 Upvotes

Hi,

My girlfriend spilt some nail polish on our table. I tried using 70% IPA to take it off (since I knew acetone was too strong), but learned the hard way that IPA can still cause problems. This is what it looks like now. Does anyone have any experience or suggestions on how I can hide these white/cloudy marks from the damaged finish.


r/finishing • • 1d ago

Woodworker here with a project question! For these 3 upholstered Murphy bed panels, what rigid backing would you use… MDF or plywood, and what thickness? Would you upholster 3 individual panels and attach them to a larger backer board, or use another method?

Post image
1 Upvotes

r/finishing • • 2d ago

Question Oil-based polyeurethane small application - evacuation needed?

2 Upvotes

My landlord would like to use oil-based polyeurethane to treat small patches of hardwood floors and a staircase landing in our house. 7 tenants between three floors and a cat and a dog. He says it will be a small application and not entire rooms, but we’re still wondering if we need to evacuate for the sake of our animals and for the tenants with preexisting respiratory issues. Any insight/experience with the fumes from smaller applications of oil-based polyeurethane would be appreciated. Thank you!


r/finishing • • 2d ago

Need Advice Masking off parts of wood for glue joints before finishing with Rubio

1 Upvotes

Hello!

Might be a stupid question, but would there be any issue with me masking off small 3/4" inch wide strips on some boards of wood before finishing with Monocoat? Id take off the board before it dries.

Id like to use some glue joints on the piece im making but I need to prefinish everything before assembly. Any issues with this plan?


r/finishing • • 2d ago

Help!

Post image
6 Upvotes

This weird white mark appeared on my table, just noticed but it must have been within the last couple days. I never set anything directly on the table (always use placemats and coasters) so really have no clue how it got here. The most ironic part is that about 2 days ago my boyfriend suggested we keep a vinyl covering on at all times to prevent such things 😭

I got the table second hand so I’m not too sure about the finish or anything. I tried a hair dryer on low heat, didn’t seem to do anything.

Can anyone provide any starting suggestions? I love this table so much. Thank you!


r/finishing • • 2d ago

Need Advice Staining raw maple… HELP!

Thumbnail
gallery
3 Upvotes

I’ve spent an ungodly amount of time stripping the millennial gray FACTORY paint off my kitchen island, finally got down to bare maple, and was feeling pretty proud of myself… until I made the mistake of Googling how to stain maple. Apparently i have the most difficult wood on earth 😭
I bought General Finishes Java Gel Stain and Dark Brown Dye Stain, their High Performance Satin Topcoat, and Minwax Wood Conditioner. Going for a rich espresso brown with the grain still showing.
Any advice before I turn weeks of sanding into a very expensive regret? 😂


r/finishing • • 2d ago

Knowledge/Technique Request for tips/tricks on applying endurapeel Wb bright white to brand new metal spray booth walls and ceiling.

1 Upvotes

Just assembled a new RTT paint spray booth. Want to coat it with endurapeel. Any advice appreciated


r/finishing • • 3d ago

Danish Oil-- respirator?

4 Upvotes

Hi, I would like to use Watco Danish Oil to finish a small piece (16" x 11"). Do I need to wear a respirator, or will it be okay to finish the item outside?


r/finishing • • 3d ago

HVLP size

2 Upvotes

Best HVLP professional sprayer for cabinetry paint and polyurethane.

I am familiar with spraying and HVLP. I need to buy a new HVLP system. I’m looking for recommendations from the field for a 5-6 stage turbine that will spray nearly un-thinned water based enamel and polyurethane.


r/finishing • • 3d ago

Not happy with finished result

Thumbnail
gallery
12 Upvotes

I'm back again, help me.

Photos are not the best as I'm downstairs in the basement, but I'm frustrated with this table, specifically the main (middle) section.

I have chemically stripped all pieces, sanded, cleaned off with acetone and then did 2 coats of hard wax oil.

There were dark scratches I was not able to fully get out - I am afraid to sand anymore, as well as the dark areas are bothering me too

What's my next step here? My husband has told me to leave it as it is, but I know myself and I will just stare at the imperfections and it'll drive me nuts.


r/finishing • • 3d ago

Question Cabinet backing color?

Thumbnail
reddit.com
1 Upvotes

r/finishing • • 3d ago

Question Matching Stain Color

Post image
3 Upvotes

I have Diamond brand cabinets in my kitchen that were installed by the builder. These are Westburke in Buckskin color and I believe the wood is maple and birch. I custom built matching cabinets for a coffee bar, but I'm having trouble matching the stain. I've worked with Sherwin Williams over a week with four different trips and neither of their mixtures match (not even close).

I contacted the dealer that my builder used and another dealer in a nearby state. Neither dealer can tell me the details of the stain mix nor do they sell the stain other than touchup kits. I've also tried asking AI for a close formula, but that has failed also.

I understand that I won't match the color exactly, but I want close so it's not immediately noticeable. The attached photo shows my cabinets in the background. The left stain sample is the custom Minwax mix from Sherwin Williams, but it's too amber/yellow. The right sample is Minwax English Chesnutt (stain I had laying around) so everyone has a known color to reference.

Does anyone have a suggestion? I'm willing to mix my own stains or buy an off the shelf color and modify it. Thanks in advance!