I just replaced my FW16 motherboard sent by Support recently because my old motherboard had a broken mid socket out of box.
After about 5 hours of finally laying down and using the new motherboard with a game, it suddenly went to 2 FPS globally. Restarts did not fix this issue. I captured some traffic going through the console during the 2 FPS storm to attempt to diagnose the issue, and ruled out:
- not the SSD. - no GPU warnings. - no CPU warnings. - happens in BIOS too, the BIOS was EXTREMELY slow. PC took over 30 seconds to register closed lid when on, and over 10 mins to boot, even slow to start keyboard at boot, and failing boot twice. - no artifacting - during the issue, CPU PROCHOT false, and all temperatures were below 60.
framework_tool --console recent had this error during the storm:
[44390.116300 SET CCG_SELECT_REG failed]
[44390.121800 cypd_write_reg8_wait_ack C:1 0x1004 response 0x9]
[44390.123500 SET CCG_SELECT_REG failed]
[44390.128700 cypd_write_reg8_wait_ack C:1 0x2004 response 0x9]
[44390.130400 SET CCG_SELECT_REG failed]
[44390.138900 cypd_write_reg8_wait_ack C:2 0x1004 response 0x9]
[44390.141000 SET CCG_SELECT_REG failed]
[44390.168800 charge_request(17236mV, 0mA)]
[44390.677000 charge_request(17240mV, 0mA)]
[44391.191000 cypd_write_reg8_wait_ack C:0 0x1004 response 0x9]
[44391.193000 SET CCG_SELECT_REG failed]
[44391.199100 cypd_write_reg8_wait_ack C:0 0x2004 response 0x9]
[44391.200900 SET CCG_SELECT_REG failed]
[44391.206300 cypd_write_reg8_wait_ack C:1 0x1004 response 0x9]
[44391.207900 SET CCG_SELECT_REG failed]
[44391.213200 cypd_write_reg8_wait_ack C:1 0x2004 response 0x9]
[44391.215000 SET CCG_SELECT_REG failed]
[44391.222500 cypd_write_reg8_wait_ack C:2 0x1004 response 0x9]
[44391.224300 SET CCG_SELECT_REG failed]
[44391.426500 charge_request(17236mV, 0mA)]
The EC uptime was 12 hours, and there is 1 ACPI error, Event 13 in Event Viewer on 11/18 (2 days prior) saying this:
The embedded controller (EC) did not respond within the specified timeout period. This may indicate that there is an error in the EC hardware or firmware or that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS. In some situations, this error may cause the computer to function incorrectly
I turned off the computer and turned it back on, unplugged. It booted in about 11 seconds. It was no longer lagging in any way. The smart charge I set to 90% now went to 100%, so I checked EC. It had reset without anyone telling it to reset!
03:47:35 Active AC 91 % 75,186 mWh
04:37:23 Report generated AC 99 % 82,044 mWh
I thought, let me make sure this CCG_SELECT_REG is not related, and that it isn't just "I plug it in later and it breaks instantly". I plugged it in and checked console... and there is no more SET CCG_SELECT_REG.
[324.421700 event set 0x0400000000000000]
[324.430800 CYPD_RESPONSE_PD_CONTRACT_NEGOTIATION_COMPLETE 1]
[324.439500 CCG_RESPONSE_ACCEPT_MSG_RX 1]
[324.436300 board_set_active_charge_port port 1, prev:-1]
[324.444900 cypd_write_reg8_wait_ack pre 0x84 ]
[324.447500 event set 0x0400000000000000]
[324.463600 CCG_RESPONSE_ACCEPT_MSG_RX 1]
[324.463000 cypd_write_reg8_wait_ack pre 0x84 ]
[324.468800 event set 0x0400000000000000]
[324.489400 event set 0x0400000000000000]
[324.505100 CCG_RESPONSE_ACCEPT_MSG_RX 1]
[324.509500 Updating charger with EPR correction: ma 4900, 3lvl_buck ma 4900]
[324.511700 event set 0x0400000000000000]
[324.519800 CL: p1 s0 i5000 v20000]
[324.521600 CCG_RESPONSE_VDM_RX]
[324.523300 AC on]
[324.530500 event set 0x0000000000000008]
[324.538100 board_set_active_charge_port port 1, prev:1]
[324.540400 cypd_write_reg8_wait_ack pre 0x4 ]
[324.544100 3lv-buck update! V:20000mV,W:100000mW]
So I want to know, do other FW16 have this CCG_SELECT_REG while charging every 14 seconds, and is it normal for FW to get ACPI warnings right after changing motherboard?
I find it incredibly strange that I would get 2 dud motherboards, but I can't see what else this could possibly be. I am taking any and all suggestions to continue to discover this issue.