r/fusion • • 4h ago

DOE Argonne National Laboratory simulations model fusion reactor blanket at record detail (WCLL, not only intended for ITER)

Thumbnail
quantumunzipped.com
5 Upvotes

r/fusion • • 14h ago

Controlling plasma vertically just with poroidal field coils in ARC like systems

Thumbnail iopscience.iop.org
2 Upvotes

r/fusion • • 1d ago

AMD opens up its new Lux supercomputer, powering everything from nuclear fusion to weather predictions

Thumbnail
techradar.com
9 Upvotes

r/fusion • • 1d ago

SCYLLA blanket by Kyoto Fusioneering: SiC analysis

Thumbnail sciencedirect.com
4 Upvotes

r/fusion • • 1d ago

Thoughts on Impact Fusion?

4 Upvotes

Not sure if this is the right subreddit to post this question on, but here goes.

I've seen some research on impact fusion, but it doesn't seem to be as well researched as magnetic and inertial confinement. Despite this, I've seen a few sources that predict truly insane fusion gains (Q = 1000 or more) at high enough impact velocity (750 km/s or greater to ignite D-T fusion if I recall correctly). This however assumes nearly 100% burnup, and that you can actually accelerate things to such speeds. To me, such a high gain seems much too good to be true.

So, what are your thoughts on impact fusion? I do have a few more specific questions, if you be so inclined.

Do you think impact fusion might have higher gain than inertial or magnetic confinement if all three were at a roughly similar level of research and development, at a similar 'tech level' so to speak?

What limitations do you foresee with this technology? Accelerator length is one that comes up in the literature I've seen, but I don't know how well it holds up if you consider anything other than just modern day electrostatic accelerators. I also wonder if high gains are only possible with a well-shaped target for inducing good compression of the fusion fuel and collecting most of the energy that is released. What I've seen about impact fusion with very small particles (macrons), however, seems to imply a precise target shape isn't needed in that case.

Do you think impact fusion is more feasible with large projectiles (say a slug massing a few grams tipped in some amount of fusion fuel) or tiny projectiles (a macron containing some fusion fuel)?


r/fusion • • 1d ago

Pacific Fusion receives its radioactive materials license.

Thumbnail
exchangemonitor.com
4 Upvotes

r/fusion • • 1d ago

A short video of the Kadomtsev stable cubic pureflow shear-flow stabilized Bennett-Shumlak-Hartman vortex equilibrium

8 Upvotes

Here is a video that I made of the ideal magnetohydrodynamic equilibrium using a CUDA C code that I wrote largely without AI assistance except for the host-side IPC, which is not CUDA C, but just about piping data through computer processes so that redundant memory reads and writes are avoided when visualizing it.

The code is open source and I am back to actively working on it: https://github.com/russellmatt66/imhd-CUDA it took around a minute for this problem to halt.

The simulation is a 2nd-order Lax-Wendroff predictor-corrector FVM scheme being solved on a Cartesian grid.

Divergence cleaning has not been implemented, and I have not run a convergence study so I can't tell you rigorously to what degree this experiment is valid, but the pinch edge is located far enough from the wall that image currents are not providing the stabilization.

The axial boundary condition is periodic. I'll take an m = 0 video next from this perspective.

(Nx, Ny, Nz) = (128, 128, 256), Nt=100 RTX 2060 (TU106) 6 GB


r/fusion • • 1d ago

Exclusive: Daniel Ek backs AI researcher's fusion power startup. Here's what they're building. | TechCrunch - Europa Fusion in UK

Thumbnail
techcrunch.com
4 Upvotes

r/fusion • • 2d ago

New Mexico Grants First Private Radioactive Materials License for Fusion - Pacific Fusion

Thumbnail
gazewire.com
35 Upvotes

r/fusion • • 2d ago

Theory explains how fusion plasmas enter a state of improved energy confinement, solving a 40-year puzzle

Thumbnail
phys.org
62 Upvotes

r/fusion • • 2d ago

Starlight Engine Formally Selected for METI’s Fusion Energy Power Generation Demonstration Project Subsidy | Starlight Engine - FAST

Thumbnail
sle.energy
4 Upvotes

r/fusion • • 2d ago

Helical Fusion with another successful magnet test (classified as TRL 5)

3 Upvotes

From X in Japanese translated:

Helical Fusion has passed the stage-gate review for its high-temperature superconducting cable under development in the Ministry of Education, Culture, Sports, Science and Technology’s “Small and Medium Enterprise Innovation Promotion (SBIR Phase 3 Fund) Program: Fusion Energy” and has received approval for completing Technology Readiness Level 5 (TRL5). The results demonstrated using a test coil were recognized following evaluation by external experts. As we have occasionally shared here, we are currently manufacturing large, complex helical coils for our final demonstration device, “Helix HARUKA.” Through a Japan-style public-private partnership that brings together government support, the expertise of research institutions, and the agile development capabilities of the private sector, we will steadily advance the world’s first practical implementation of fusion energy.


r/fusion • • 3d ago

A new Helion video, take it with care

Thumbnail
youtu.be
16 Upvotes

r/fusion • • 3d ago

Ontario and Canada Select the University of Toronto as Host for Province’s First Fusion Energy Research Chair

Thumbnail news.ontario.ca
10 Upvotes

The University of Toronto, which is investing an additional $2.5 million in the endowment, will serve as the home base for research focused on plasma physics for fusion energy. Leveraging the university’s world-class engineering and physics expertise, the initiative will provide cutting-edge research infrastructure, hands-on learning opportunities for students and industry partnerships to attract top talent, drive investment and strengthen Ontario’s emerging fusion energy sector. As host, the university will lead a competitive recruitment process to identify and appoint a world-class researcher to serve as the inaugural chair.

Looks like UofT is finally getting its own plasma department.


r/fusion • • 3d ago

Fusion Space Propulsion and Power Conference June 8, 2027, Washington DC - by FIA

Thumbnail fia-2027-fusion-space-propulsion-and-power-conference.eventsairsite.com
4 Upvotes

r/fusion • • 3d ago

No fusion reactor shaped like a floating magnet has ever had an exhaust system, and the US just funded the first design

Thumbnail
interestingengineering.com
14 Upvotes

Every fusion reactor has to clear heat and stray particles before they melt the walls, and conventional reactors use a divertor for that. OpenStar Technologies and Columbia University won a DOE INFUSE award to design one for a levitated dipole, where a single superconducting magnet floats inside the vacuum chamber like a planet’s magnetic field. Over 12 months they’ll pair two simulation tools with data from OpenStar’s New Zealand prototype, Junior.

The catch is that this is a modeling and design project, not a built device. The divertor is meant to debut later on OpenStar’s next machine, Tahi, which will first produce neutrons for medical isotopes.


r/fusion • • 3d ago

[2611.23412] Effect of scrape-off losses and current flattening on runaway electron dynamics in ARC - chances to control their current to managable level

Thumbnail
arxiv.org
3 Upvotes

r/fusion • • 3d ago

Nuclear fusion supply chain

7 Upvotes

Are there fusion-specific supply chain bottlenecks (as opposed to general grid/power electronics supply constraints that would affect any power plant)? Wondering both in terms of current experimental development as well as if, in the future, we have a viable fusion process and want to scale it commercially.


r/fusion • • 3d ago

Helical Fusion Awarded Up to JPY 19.2 Billion ($126M) in Japanese Government Funding to Accelerate Commercial Fusion Power

Thumbnail
businesswire.com
3 Upvotes

r/fusion • • 3d ago

Spotify Billionaire Ek works with secretive UK-based Europa Fusion Industries, founded by former Head of Machine Learning at Pacific Fusion

Thumbnail
bloomberg.com
10 Upvotes

r/fusion • • 3d ago

Industry leaders want Canada to choose whether it builds its own fusion future or buys it from abroad ("Theranos-type risk" mentioned)

Thumbnail
betakit.com
6 Upvotes

r/fusion • • 3d ago

Mike Ford of PPPL joins Thea Energy as Senior Vice President of Nuclear Engineering

Thumbnail
linkedin.com
4 Upvotes

r/fusion • • 3d ago

Tokamak Energy performs the first magnet coil test for STEP: 77K "sub-scale" model TF coil

Thumbnail x.com
9 Upvotes

r/fusion • • 3d ago

Cost is the monkey, not plasma physics!

Thumbnail
x.company
15 Upvotes

https://x.company/blog/posts/tackle-the-monkey-first/

https://x.company/blog/posts/three-things-i-learned-from-turning-seawater-into-fuel/

I thought I would share these two articles from X (aka Google X labs). I mentioned them in another post.

Astro Teller’s rule: if you want a monkey reciting Shakespeare on a pedestal, train the monkey first. Building the pedestal looks like progress, but it was never the hard part.

This is the perspective from Astro Teller, CEO of X the 'Moonshot lab' division of alphabet.. where Waymo was developed. It is a useful perspective of how long-shot projects can be developed with an aim for commercial viability.... while being clear eyed about the viability and 'go/no-go' decision making for a project.. especially around cost.

The core lesson to learn is that you should focus your efforts on the most difficult-to-solve problem of a system.. and defer the more tractable problems for later. Not the other way around. "tackle the monkey first". For cost-sensitive technologies, that monkey is often cost. When it is, recognize it and work on the cost problem with clear eyed cost analysis. Dont just focus on the fundamental physics when the problem is cost.

The example here is project Foghorn... a project where engineers were trying to make liquid fuel by extracting carbon from seawater and turning it into fuel. While they had a workable chemistry/physics path, they did not see a way to make it cost effective. They quickly identified cost as the 'monkey' in the project, and spent half of their resources on cost modeling, until they had enough clarity to determine if the cost targets could be met. When they determined cost targets would not be met, they abandoned the approach because they did not want to waste resources further developing a prototype for something that was not commercially viable. The technical prototype was the 'pedestal'...

This is a lesson the fusion community needs to learn.

In my opinion, many of the companies claiming near term commercial viability in fusion are focusing on the pedestal (plasma physics), when the monkey is the cost challenge of a commercial system, complete with its neutron handling, breeding, heat exchangers, cryo, magnets, indirect costs, etc....

To win this market, a cost target of ~$50/MWh must be achieved. To even enter the market, <$100/MWh is needed. This is CFS' statement, and I agree with it.

I have seen no published, independently reviewable technoeconomic analysis from any of the main tokamak/stellarator companies that shows a path to the target.

I am a physicist so I love to look at physics... but even I recognize that the monkey is not plasma physics.

The monkey is cost.. and no one is showing a path.