r/handtools • u/Andi_FJ • 5h ago
My first piece of hardwood furniture – a small bedside table made from laminated beech
galleryWhen I drove to the timber merchant about 3½ years ago and bought kiln-dried beech timber, I didn’t realise at the time that I would have to learn a great deal over the years in order to achieve a decent result with this wood. The plan was to use only hand tools and mortise-and-tenon joints. It took me the first year to get from rough-sawn timber (33 mm thick) to planed 25 mm boards. In the process, I learnt both how to sharpen planer blades and how to deal with the straight edge and twisted grain. I fitted a Japanese stone to the Tormek, and eventually got into the habit of sharpening the blades every 6–8 hours. Up to this point, apart from the groove in the laminated timber, I’d done everything with hand tools.
In the second year, it was time for most of the mortising work. When cross-cutting the boards, I used the plunge saw for the first time. I quickly realised that whilst beech is very strong, the wood can also split. So I put the large wooden mallet aside and applied countless blows with the wooden mallet to the chisels to create the joints in the body.
Along the way, I also fitted a sanding guide from Veritas, as the narrower chisels kept tilting sideways in the Tormek holder. For the finishing touches, I still had some hard oil and sanding fleece to hand; I modelled the drawer mounting on that used in other pieces of wooden furniture. To complete the project, I joined the drawer components using 8mm wooden dowels (drilled with the (instead of a manual one).
I’m very pleased with the result, even if some of the details really do scream ‘rustic furniture’. From a commercial point of view, the chest would be priceless, but for me it was a wonderful learning experience, and I reckon I could even sell the electric planer now ;-)
Next on the agenda is a shoe rack made from acacia wood – that’ll be fun, as the wood can be sawn, planed and worked in no time at all :-)
