r/howto • • Mar 09 '25

We're starting a "repost list" of questions that are so frequently posted that we'll be removing them. Details below...

56 Upvotes

Your question may already have been answered! Check our FAQ

Any suggestions for additions to the list? Comment below, we'll take a look

Thanks to /u/arithmetic for the suggestion


r/howto • • 13h ago

Serious Answers Only How do I open this bottle!

Post image
63 Upvotes

Got a bottle of MAMAJUANA, and This stupid cap is in the way of pouring liquid in it. Twisted, pulled, pried, no luck on anything. It'll twist, but it won't come off. HELP!


r/howto • • 20h ago

DIY How to waterproof the basement door — drain overflows with heavy rain and floods basement

Post image
33 Upvotes

They already looked at the drain and it’s a city infrastructure problem plus climate change with too much rain. The basement door in the image is actually on the right. There is a screen door, a gap, and a wood door. I was thinking of putting up a shower pan liner against the bottom of the door in this alcove and placing sandbags to seal the edges. I don’t know if water will be able to sneak through the cracks on the edges of the sandbags though (since they are bags and bags have rounded edges). Any ideas? It’s a rental so this is a temporary fix until my landlord can figure something out.


r/howto • • 8h ago

How do I get this off my wall?

Thumbnail
gallery
2 Upvotes

Curtain rod mounting. It appears that the base is screwed tightly onto a bolt that is coming out of the wall. Does not even wiggle. Have tried pushing it up etc. to see if it's on a bracket but it doesn't even wiggle. Tried to twost it with a wrench but the metal is too slick to really grab hold of.


r/howto • • 6h ago

how do i change this shower head

1 Upvotes

Unscrewed to reveal the swivel ball head but really was looking to replace it to a better flowing shower head am renting in aus also so if its too difficult im just gonna let it go but the head itself sucks and the tips disgusting


r/howto • • 11h ago

How to blow up this rubber bouncy toy?

Post image
2 Upvotes

Like the title says I'm looking for any advice or tool suggestions for this blow up bouncy kids animal toy


r/howto • • 8h ago

How to remove something stuck on mirror?

Thumbnail
gallery
0 Upvotes

Just moved into a new house and the medicine cabinet in the bathroom had something stuck on it previously (not sure what?), and I can’t figure out how to get it off without risking breaking the mirror. I don’t really have the extra money to replace the cabinet right now, so I trying to figure out the best way to clean it up!


r/howto • • 1d ago

How to childproof this????

Thumbnail
gallery
175 Upvotes

It’s a child’s bedroom. I rent don’t own.


r/howto • • 13h ago

Serious Answers Only How do I remove seized and worn down brake bleeder valve?

Post image
2 Upvotes

Only have a few inches of work space. Not enough room to hammer a torx removal socket on it. The only thing I haven’t tried at this point is the oxyacetylene torch. Removing the wheel isn’t an option.


r/howto • • 1d ago

Stuck woodpecker

Thumbnail
gallery
300 Upvotes

A woodpecker pecked its way into our pergola and is now stuck at the bottom of the hollow post. It’s now stuck inside and I can’t close the hole. Any thoughts on getting it out? And then getting it to stop destroying our pergola? I don’t really want to entomb it alive even if that might be a problem solved itself situation it seems cruel.


r/howto • • 13h ago

Serious Answers Only Stuck fan cord??

Post image
0 Upvotes

It just won’t pull now??? I really do not wanna try to take it apart if that’s possible as this bitch is HEAVY, thank you😅


r/howto • • 19h ago

DIY How do I best clean this metal threshold? I assume it is aluminum.

Thumbnail
imgur.com
2 Upvotes

r/howto • • 1d ago

How to pull on washer in carpet with no room on the sides

Post image
39 Upvotes

The gap on sides have no room for fingers. How do we do this?


r/howto • • 13h ago

Serious Answers Only Is there a way I can switch these armrests around with each other without disassembling anything other than the armrests?

Post image
0 Upvotes

Had this chair a good week or so, and one of my family members had assembled it for me while I was out and its been lovely, aside from the armrests...

they're not that comfy as for some reason it looks like its headed towards rhe backrest instead of forward, and the right and left are in the wrong spots, by that I mean when you sit down, the right armrest is actually the left and the left is the right, I saw the markings of L and R underneath their corresponding armrest when I checked earlier.

I just wanted to know if its possible to switch them around without having to disassemble anything other than the armrests themselves? My room is pretty small and I have my bed if its possible to put it on it without breaking anything, then switching the arms? Hopefully that would fix the way the armrests are uncomfortable, too.

Thanks for any responses


r/howto • • 1d ago

How do I get rid of fiber glass on my finger?

22 Upvotes

As of now it's been like more than 10 hours since this happened (happened during night time). I was demonstrating to my cousin how to close and pack up a pop up tent when I noticed this black wire thing split bad disconnected I didn't think much of it and wanted to fix it and when I pulled this split/disconnected part which I thought was Plastic I felt a sharp pain in my index and looked down to saw it was fiber glass. Immediately panicked and washed my hand straight away.

I did look up some things to do here on reddit and google but nothing seems to be working some fragments are still on my finger and I can feel it but it doesn't hurt all that much it's just this stinging feeling when I press on the correct spot it was lodged.

Any tips? (Yes I did do the tape the method thing)


r/howto • • 1d ago

Stripped hex head . How do i remove it without damaging my panel

Thumbnail
gallery
4 Upvotes

Its in an annoying location. Silver screw


r/howto • • 1d ago

How to make for Christmas

Post image
13 Upvotes

Looking to make this for a Christmas gift. I am pretty handy but will admit this is out of my wheelhouse. The best I have come up with is to use a hemp like rope around a wooden dowel. The animal print is my hang up. Do I use a template to spray paint it? Would that smell or not last? Do I wrap the black parts with another thread? Anyone have another subreddit they can suggest?

TIA!


r/howto • • 23h ago

DIY How to remove shower rail

1 Upvotes

I got this American standard shower rail, which I can't seem to find the model of on their website. Trying to remove it but can't figure out how


r/howto • • 1d ago

Remove red wine stain from cabinets

Post image
2 Upvotes

We have quarter sawn white oak cabinets with a mild white stain on them. My wife spilled red wine on the cabinets and I can't seem to scrub it off. Unfortunately, when we got the cabinets the contractor didn't put a protective finish on them and we haven't had the money to get that done yet ourselves estimates are ($5-9k). How can I get this red wine stain out of the cabinets?

I scrubbed with household cleaner and with warm water and soap. If I scrub too hard though, I'll scrub the white coloring stain off the cabinet.


r/howto • • 1d ago

[Solved] How to hang an ikea ceiling lamp

Thumbnail
gallery
0 Upvotes

First time installing a lamp, do these connectors match? I'm capable of following ikea instrucrions but there are 3 cables instead of just 2. Which is which? Also, do I need a screwdriver do remove the old light fixture? Please ignore the unhinged landlord paintwork.


r/howto • • 15h ago

DIY Repairing a Display Case

Thumbnail
gallery
0 Upvotes

I've bought a Nagini statue on vinted some days ago, but as you can see it came fairly damaged on the display case. Is there a way i can fix this? it breaks my heart seeing such a good statue destroyed by a person who didn't care enough to protect the package with some sponge or pluriball...


r/howto • • 16h ago

DIY How to install this gate spring?

Thumbnail
gallery
0 Upvotes

Bought this 11" Everbilt gate spring. What's the best placement on this metal gate that swings inward (toward the house)?

Also, are these screws appropriate for metal gate or is it just meant for wood?


r/howto • • 1d ago

Serious Answers Only Fasten the drawer to stop it from leaning out

Thumbnail
gallery
2 Upvotes

(2nd photo 4 ex)
the drawer is so flimsy in there without a track, what could be a substitute solution?


r/howto • • 1d ago

How do I unscrew this?

Thumbnail
gallery
5 Upvotes

So this is a paint pressure pot that I am trying to convert to resin pressure pot. But this is not unscrewing tried wd40, vice grip, pipe wrench, alcohol soak.
That last thing I can think of is taking a torch but it is a little expensive for me right now.
Any advice?