r/htpc • u/OkWork8974 • 4h ago
Tip Share Pepperjobs W11 IR Cloning - Successful!
Hey All
I just wanted to share I figured out how to reliably clone/program remotes on the pepperjobs W11.
First the instructions are definitely wrong so disregard that. To copy IR commands I've used the following process reliably.
- Press and hold the TV button for about 6 seconds. You will see the red light go from bright, to dim, and back to bright again. Once it goes back to being bright red you can let go and its now in learning mode.
- Press any button that you want to program on the PJ W11
- Press and hold the button on the remote you want to copy and point the to IR tranceivers together. This is the one part that is slightly unreliable but I don't think is a PJ issue. What you're looking for is the red LED to blink really quickly for about 1/2 a second. I've never had to try to program a button more than once when the IR is pointed at each other if it doesn't happen immediately just move it around a little bit and I've always got it to receive the code within a second or two but 90% of the time it is instant.
- You can now click the next button you want to program by going back to step 2 and repeat. Keep repeating steps 2 and 3 until you have all the buttons programmed/cloned you want to repeat/clone.
- Press the TV one time to exit pairing mode.
- Test the buttons you just programmed. They should work.
I hope this helps someone. I've not tried getting wake from sleep to work (maybe it works now?) if I find something there I'll share as well.
