r/Hydrology • • 1d ago

What causes this?

Post image
4 Upvotes

In the photo you will see somewhat of a brown colored trail under the thin layer of slush/ice. This was observed in most areas like this on the creek I was at. This photo is in the Great Basin.

Thanks


r/Hydrology • • 2d ago

How would you approach designing a monitoring network for an already monitored watershed?

1 Upvotes

A little bit of background: Two colleagues and I are working on a project in a small watershed (roughly 200 km²) in a temperate climate. Our team has been tasked with coming up with a monitoring plan and purchasing additional environmental sensors to better understand low flows, flooding, and the overall water budget, particularly in the context of climate adaptation.

The catch is that our backgrounds are in environmental science and economics, and none of us have much hands-on experience designing or operating hydrological monitoring networks.

The watershed is already monitored by a regional water authority, so we're not exactly starting from scratch. We have access to existing hydrological and meteorological data and the opportunity to add some of our own equipment. We're potentially looking at things like discharge, water quality, and how changes in forest and agricultural management affect hydrological processes.

We're struggling a bit with where to start. We have a budget for sensors, but we're still figuring out our specific monitoring priorities... I'd rather not end up with a bunch of expensive equipment collecting data that nobody actually needs.

So I'm curious how people who've actually designed and operated these networks would approach this.

A few things I'm wondering about:

  • How do you decide which additional parameters or locations are actually worth monitoring? What makes you say, "Ok, we really need a sensor here"?
  • Would you prioritize continuous monitoring at a few carefully selected locations or broader spatial coverage with simpler equipment?
  • What are some common mistakes newbies like us make when planning monitoring networks or buying and deploying sensors that we could avoid?

I realize the obvious answer is probably "define your project and research questions first," and we're working on that. However, I'm curious what else experienced hydrologists would consider before committing to a monitoring setup.

I'd love to hear how you approached it and what you'd do differently in hindsight :)


r/Hydrology • • 3d ago

Hydrogeology Career Opportunity

4 Upvotes

I’m currently a Master’s student doing research using numerical modeling and machine learning methods with a bachelor’s in hydrogeology. I was for the longest interested in academia, but recent stuff is making me reconsider. What would my job opportunity be in consulting (whether it be mining or environmental), and what could I expect for a starting salary? I’d like to work in a role with a good amount of numerical modeling and data science. I’d also prefer to live in a bigger city (SF, NYC).


r/Hydrology • • 3d ago

Environmental professionals: Does oil company owned riverfront land below a home raise serious red flags?

1 Upvotes

A close and dear relative offered on a modest new build with a fairly long yard leading to steep, roughly 100-200 ft. slope down to a major urban river. When i asked who maintains the slope down to the river my relative did not know, so asked the builder. The builder named a major oil company who owns and maintains the slope down to river front. There is a barge parked just a ways away down the river. My main concern is contamination though perhaps there's additional reasons for concern regarding this set-up.. For anyone with environmental engineering or related experience, on a scale of 1-10, 10 being very concerned, how concerned would you be if someone you really cared about were about to buy this house and why? I can't share photos on a public post for privacy reasons and there is no time for further investigation before the inspection contingency expires. I understand this isn't enough to assess actual risk, so I'm just asking for gut reactions based on your professional experience and this limited description. Any help very much appreciated.


r/Hydrology • • 4d ago

HEC-SSP frequency analysis distribution

6 Upvotes

Hello, I am doing a hydrology modelling course where we have to use HEC-SSP general frequency analysis tool and we need to specifically use Log_Pearson_III distribution but no matter what I do I cant seem to make the distributon popdowns appear :( is there someone else who has been a victim to this issue? Data was imported from HEC-DSSVue

EDIT: I fixed it. The program did not like my display size, when i changed it it was fine.


r/Hydrology • • 3d ago

Hec-HMS breakpoint deletion en-masse

2 Upvotes

Pretty much the title but I’m wondering if anyone knows a way to delete breakpoints en-masse in HEC-HMS. The manager doesn’t let me select multiple and I was hoping to not have to delete the breakpoints files in my file explorer to do this.


r/Hydrology • • 4d ago

Solinst Baro, Leveloggers data reliability

4 Upvotes

Hi all

I'm a year 1 PhD and have 21 units deployed in an upland wetland in Ireland, but I'm running into a strange issue with my data

I have 20 Leveloggers, and one Barologger for barometric compensation.

I have deployed units twice this year, once in February with loaned units and again then in June with units purchased for the project.

There is an issue with the data collected where identical failures at approximately 684 and 1,367 hourly records (as per the rows in the XLE output), where the sensors go completely off the rails at hour (eg) 684 and record wildly excessive temperature and pressure readings, and then at hour 1,367 return either to a consistent but impossible set of measurements, or total zero. These anomalies are consistent across 10 units, and both the barologger which was deployed in February and also the June deployment see exactly the same issue.

I'm thinking it's a Desktop Interface software issue (4.7.1). I'd love to know if anybody else has experienced anything of this sort, and what solutions people might have found.

My background is in instrumentation and wet chemistry (I'm an older PhD) so I'm no stranger to problem solving, however this is a new field and family of instruments so I'm slightly out of my depth (pun intended)

Any assistance would be very welcome


r/Hydrology • • 3d ago

help a student out

1 Upvotes

Please, I’m currently studying Engineering in a public university, specializing in Water Engineering. I’m having some difficulties with the software tools used in my field and figuring out how to learn them, especially since I’m already in my 4th year.

I haven’t really found the right way to approach learning these tools, particularly because some of them are quite advanced and complicated. I’d really appreciate it if anyone could recommend platforms where I can find free courses, or share any advice on how to learn these software tools and dedicate time to them alongside my university studies.


r/Hydrology • • 5d ago

Hochul pushed to codify PFAS limits, skirt federal rollback

Thumbnail
news10.com
5 Upvotes

r/Hydrology • • 4d ago

What Tools are you building? (With AI)

0 Upvotes

Hey everybody,

my flatmate just introduced me to Claude Code and all it's possibilities. I instantly started to build all those tools I always wanted but never had the time or coding knowledge to actually do it. I built a GeoData Downloader that gets all the data you need in your project area. Right now I'm working on a custom Mesh Generator for 2D-modelling and stuff really works quickly after a few fixes.

What's the most useful tool you built by yourself and what else are you working on? (Doesn't matter if vibe coded or not)

Cheers


r/Hydrology • • 6d ago

Recommendations for remotely measuring streamflow?

12 Upvotes

Hi all, I’m building rating curves for a few medium-sized streams. They’re mostly wadeable, but at the high end of the hydrograph they get too dangerous to wade and I haven’t been able to measure peak flows. I’m looking for recommendations on relatively affordable devices (under ~$15–20k) that can be installed in-stream to measure discharge remotely. I’ve seen a few papers that used the SonTek-IQ Plus, but I haven’t inquired about pricing yet. Has anyone used that device or something similar? Any thoughts or advice would be appreciated!


r/Hydrology • • 6d ago

PE reverting to HEC-1 after previously modeling the same waterway with HEC-HMS?

9 Upvotes

Hi guys, hoping it’s ok for a newbie to the field of hydrology to ask a couple of questions. I’ve asked google but it gives different answers depending on how I word it *sigh*

I’m trying to understand what reason(s) might cause a PE to switch to using HEC-1 modeling for the same stretch of water way where they performed a study just 5 years earlier using HEC-HMS. At the time of the second study, HEC-1 was last updated 20 years prior (noted in the modeling parameters). Both studies were performed for the same purpose; just for two different groupings of buildings. Same property, same owner, same body of water.

Any ideas why a PE might revert to using legacy software when they were capable of using HEC-HMS and had previously done so for the exact same location?

TIA for any help!


r/Hydrology • • 6d ago

I need a help from a hydraulic/ hydrology engineer!! (Civil engineer major)

2 Upvotes

I need help with my project to design a stormwater drainage network in Madaba. I’m not sure how to choose the network layout, especially since I also need information from the municipality.
If anyone has experience in this field or can guide me and show me on where to start and how to develop the layout, I would really appreciate your help. I need to finalize this first stage before moving on to the calculations and detailed design, but I’m currently stuck.


r/Hydrology • • 6d ago

Replacing a Large Catch Basin With a Smaller One

Thumbnail reddit.com
1 Upvotes

r/Hydrology • • 7d ago

Advice for a student group pitch research project!

4 Upvotes

Hi everyone,

We’re a student team working on a pitch project focused on industrial water sustainability, specifically targeting Ultrapure Water (UPW) waste in semiconductor manufacturing. We want to make sure our engineering logic holds up in the real world and aren't overlooking obvious operational bottlenecks within this field!, So, here's just a quick run through of the current problem and our proposed solution.

The Problem:

Semiconductor fabs use massive amounts of Ultrapure Water (around 20–38 million liters/day for a typical large fab) to rinse wafers and clean chambers, and producing 1 unit of UPW takes roughly 1.4 to 1.6 units of municipal water. After use, this wastewater contains acids, bases, fluoride, copper/heavy metals, CMP slurry, and a whole bunch of other nasty chemicals. Because many facilities mix these streams or treat them too broadly, recycling becomes expensive and energy-intensive, especially problematic since many fabs operate in water scarce regions.

Our Proposed Solution:

Instead of treating wastewater as one mixed stream, we’re proposing an AI + IoT drain-line segregation and predictive maintenance system:

  • Real-Time Sensing: Low-cost IoT sensors on individual tool drain lines monitoring pH, conductivity, turbidity, TOC (Total Organic Carbon), and fluoride.
  • Tiered Routing: An ML model classifies the waste stream in real time and diverts it by quality. as in, sending mildly contaminated water to lower-tier reuse (cooling towers, exhaust scrubbers) and reserving energy-heavy UPW regeneration only for the cleanest reclaimable streams.
  • Chemical Dosing & RO Maintenance: The AI adjusts treatment chemical dosing dynamically and predicts Reverse Osmosis (RO) membrane fouling to optimize cleaning cycles.
  • Safety Failsafe: Includes a human approval step and an automatic fallback, so if by chance a model's confidence drops below 95%, the valve automatically diverts the stream to full baseline treatment so nothing slips past!

Projected Targets:

  • 10–20% reduction in treatment chemical and RO membrane operating costs.
  • +8% boost in fab water recycling rate (e.g., moving from 87% to 95%), saving roughly 400 million liters per year for an average fab. Rollout: Starting with a single non-critical pilot production line before scaling.

Where we’d love your honest feedback:

  1. Sensor durability: How realistic is deploying these inline sensors (especially TOC and fluoride) in harsh fab drain lines containing HF or abrasive CMP slurry without constant calibration/fouling issues?
  2. Retrofitting: In existing fabs, are drain lines already physically separated enough for automated valve diversion, or would retrofitting plumbing kill the ROI?
  3. Risk tolerance: Even with a 95% confidence fail-safe routing to full treatment, would fab facility managers ever trust automated diversion on live lines?

We appreciate any critique, reality checks, or plain old advice for this little project of ours!

P.S: It would be helpful if everyone replying mentioned their current occupation, let it be a student or a professional, anything helps us. And our feedback loop! hence submitting this google forum would do us great help (Currently at 53 responses!)

google forms: https://forms.gle/B9zF4yDDKGxK63jZ8


r/Hydrology • • 7d ago

Looking for advice regarding a student water conservation pitch competition!

Thumbnail reddit.com
2 Upvotes

r/Hydrology • • 8d ago

Can a river basin face a water crisis even when its average annual inflow remains relatively stable?

Post image
7 Upvotes

've been exploring this question in our recent study of the Ili–Balkhash River Basin in Central Asia.

One of the key issues is that average water availability does not necessarily reveal the risks associated with hydrological variability, prolonged dry periods and competing water demands.

I'm curious to hear from the hydrology and water resources community:

Do you think water management models place too much emphasis on average annual inflow, while paying insufficient attention to the sequence and persistence of dry periods?

Our research: Scenario-Based Assessment and Modeling in the Ili–Balkhash River Basin (Water, 2026).

https://doi.org/10.3390/w18192457


r/Hydrology • • 9d ago

Help finding permanent water level and flow equipment

8 Upvotes

Hi there,

My work has a wetland area that has a stream that we want to set up a permanent monitoring station and I have been tasked into looking into equipment for it. We would like to have both a flow monitor and stream water monitor. We would also ideally like for it to be able to connect to a cellular network to transmit the data.

I am in the US, and I have been told not to worry about the budget at this point in the research stage, so any direction you can point me in will be helpful!

Thank you so much in advance! I have almost no hydrology knowledge so I have been struggling


r/Hydrology • • 9d ago

Need someone help finding direction post undergrad

8 Upvotes

Hi everyone, I'm currently half way through my bachelors in Earth science with a concentration in Environmental and Hydrology. I switched from chemistry to this degree, but I'm really happy with my switch so far. I'm just curious, is there much job security in this field? Like will it be hard to find a well paying job out the gate with my Batchelor's? Or should I try and get into a masters or PHD program? I don't have any experience in research but plan on applying for some opportunities next semester.


r/Hydrology • • 9d ago

Micro watershed delineation questions

Thumbnail reddit.com
2 Upvotes

Reposting this here in case I reach other folks


r/Hydrology • • 10d ago

Hiring for Water Engineering Project Manager

9 Upvotes

I didn't know where else to post this.

Title days it all - hiring for a Water Engineering Project Manager role to oversee implementation of digital tools (Power BI / SQL / GIS / AI).

Ideally between 6-8 years experience. East coast based but fully remote. No PE required, but experience in data analytics/science + water/Wastewater/stormwater preferred.

If interested please send me a message.

Edit: USA based

Edit: 112k - 155k based on experience

Edit: details This role works closely with clients to develop technology roadmaps, evaluate and select solutions, establish supporting business processes, and guide implementation efforts through deployment and adoption. Responsibilities include leading the development of advanced BI reports and dashboards, recommending optimizations for enterprise applications, and collaborating with technical staff in the design and implementation of data integration and analytics solutions. This role will apply recognized data management and governance practices, including DAMA-DMBOK principles, to assess data capabilities, define governance approaches, improve data quality and accessibility, and develop practical roadmaps that maximize the business value of client data assets


r/Hydrology • • 11d ago

I built an interactive 2D and 3D map of the Great Lakes that lets you explore water temperatures, underwater currents, and conditions at different depths

Thumbnail
greatlakestrolling.com
231 Upvotes

Explore all five Great Lakes in 2D and 3D. See water temperatures below the surface, thermocline depths, underwater currents, depths, and animated wind and wave forecasts using NOAA data.

2D: https://greatlakestrolling.com/
3D: https://greatlakestrolling.com/great-lakes-3d

Let me know if you have any feedback or anything else thats cool you want added.


r/Hydrology • • 10d ago

Projet de fin d'études d'ingénieur : dessalement d'eau de mer à énergie solaire avec capteurs et enregistrement de données. Quels capteurs et quelle approche utiliseriez-vous ?

1 Upvotes

Bonjour à tous,

Je suis étudiant en BTS en Tunisie et il me reste environ deux mois pour terminer mon projet de fin d'études (PFE).

Projet : un système de dessalement solaire (évaporation + condensation, avec un radiateur pour le refroidissement). Je souhaite ajouter des instruments pour mesurer et enregistrer :

Pression

Température (évaporateur, condenseur, ambiante)

Niveau d'eau

Niveau d'énergie solaire (tension/courant photovoltaïque)

Objectif : mesurer les performances réelles (litres/heure, énergie par litre, rendement), et non pas simplement automatiser le processus.

Mes questions :

  1. Quels capteurs recommanderiez-vous pour ces mesures (peu coûteux et fiables en conditions chaudes et humides) ?
  2. Une API et l’enregistrement des données suffisent-ils, ou devrais-je envisager autre chose ?
  3. Quelles sont les erreurs courantes à éviter lors de l’instrumentation d’un système thermique de ce type ?

Mon temps est limité, je souhaite donc une solution simple et robuste. Vos conseils et liens sont les bienvenus. Merci !


r/Hydrology • • 11d ago

IDF Curves Environment Canada

Post image
0 Upvotes

Hi!

Does anyone know how to get/print IDF Curves from Environment Canada? I keep getting led to these pages: https://open.canada.ca/data/en/dataset/15aa455c-9f9f-4405-8eee-4445d02fd35c https://climate.weather.gc.ca/prods_servs/engineering_e.html that explains how curves are produced and links to download IDF data and not the actual curve... Scholarly papers I've seen with a print IDF Curve from the ECCC only credit the ECCC, and no links in the References lead to the original pdf or images of the curves :,(

Any help is appreciated!