A month ago I showed a prototype of Bluetooth audio on the iPod classic 6G, with a patched bootloader, OS patches and a native Bluetooth menu. Since then it's moved from a bench prototype to something that already installed to real iPod for my friend. The photos show the custom PCB and how it's wired into the iPod. There's a demo video in the comments.
What's new
Custom PCB. The loose module and level shifter are now one small board: an FSC-BT1036C plus an SN74AXC4T774 level shifter. It connects to the iPod with 8 wires:
- I2S (WS, data, BCLK), tapped at the DAC (CS42L55) input pins and shifted from 1.8V to 3.3V
- Control UART from the dock UART pads on the back of the logic board. Those are already 3.3V, so they don't need shifting.
- 1.8V, 3.3V and GND from the PMU rails
The Gerbers and a photo wiring guide with every tap point will be published.
The Bluetooth menu has grown:
- Settings › Bluetooth: power, a device list, a Search page (audio devices only), and Connect / Forget for each device
- Option to auto-connect to the last device; the Bluetooth name can be "iPod Classic" or your iPod's iTunes name
- The iPod volume controls the headset volume, and the headset buttons control playback
- A Bluetooth icon in the status bar: grey when on, blue when connected
- Plugging wired headphones in turns Bluetooth off, and unplugging brings it back
- Output stays locked at 44.1kHz while a link is up
- Menus in all 20 of the iPod's languages
- The module is still fully unpowered when the iPod sleeps
Other features you can pick in the installer:
- Native FLAC playback (Rockbox's decoder running inside Apple's OS)
- USB Audio mode: the iPod works as a USB sound card for your computer
- Year in album lists, clicker settings, a 24-hour clock on the idle screen, and a resampler lock for bit-perfect 44.1kHz
- Disks larger than 128GB on the 2007 model (LBA48), in both the firmware and Disk Mode
- Experimental: a BLE companion web page that shows Now Playing and controls playback from your phone
Supported: iPod classic 2007 (firmware 1.1.2) and late 2009 (2.0.4). The iPod with video (5.5G, firmware 1.3) works with the installer too. The 2008 120GB model and anything on 2.0.5 isn't supported yet.