r/kintsugi • u/Broadmead-1959 • 16h ago
Urushi Based Sake cup
Finally finished this little sake cup..
r/kintsugi • u/Broadmead-1959 • 16h ago
Finally finished this little sake cup..
r/kintsugi • u/Dmnkly • 1d ago
A number of years ago, I dropped a beloved piece of pottery I've had for nearly 30 years. "No problem!" I said. "This is my opportunity to try out kintsugi!"
Perhaps I shouldn't have. The results were a little... blobby.
Try not to laugh. (Okay, go ahead and laugh, just don't tell me. Okay, go ahead and tell me, just do it in an "I'm laughing with you" and not an "I'm laughing at you" kind of way.)
Maybe it's the varying thickness of the lines, maybe it's the breaks in the lines, maybe it's the fact that I used a liiiiiittle more epoxy than I should have, or maybe it's just the shape of the cracks. But it looks awfully... amateurish. Which is accurate. I am an amateur. But I'm wondering if there's some way to make it look a little less more so?
I'm open to suggestion. I've considered trying to Dremel the blob down to at least make it flat, thinking that might help. (Though I've no idea what the best method for sanding down blobby epoxy might be.) But rather than rushing headlong into another amateurish attempt, I thought maybe I'd solicit some help first.
I am in your hands. Any suggestions both welcome and appreciated. Thank you!
r/kintsugi • u/studiohanakintsugi • 3d ago
#studiohanakintsugi #kintsugirepair #customkintsugi #kintsugivase #kintsugiart
r/kintsugi • u/BeautifulDifferent17 • 6d ago
I started a practice Kintsugi project with a small cheap pot I broke a small piece off of; in preparation for attempting the repair of a large Koyo pot over the winter that broke while being shipped to me.
I was a little bit nervous due to it being my first time working with raw urushi, but so far I am happy with the results and to have done it without any accidental skin contact! I had extra mugi urushi left over after doing the pot so I used some of the extra to also repair a broken turtle chop stick holder we had laying around that my sister-in-law got for us in Korea. Now both go into my make shift Muro box to cure for at least a week!
I think I probably have slightly more mugi urushi sticking out from the cracks then I was aiming for, but I don't think it will matter once it cures and I remove the excess with an exacto knife.
Happy with the results for a first attempt! And definitely feeling a lot more comfortable with what I am doing when it is time to get started on repairing the Koyo pot.
r/kintsugi • u/lakesidepottery • 7d ago
Finding it meant so much to him and his family, a reminder of their happy home and the life they had shared. Kintsugi was a fitting way to preserve the mug’s scars and the family memories.
r/kintsugi • u/jocularplate • 8d ago
I recently broke two of my favorite coffee mugs with lots of sentimental value. I would love to repair them with using urushi and gold paint so I can reuse them to drink my coffee. I'm wondering if these broken mugs look good candidates for repair.
I'm also wondering if a starter kit would cover both of these mugs. I know most kits have about 0.1 grams of gold powder, but I don't know if that's enough.
Any help is appreciated! I'm a complete beginner.
r/kintsugi • u/Optimal_Mine887 • 8d ago
Hi everyone,
I live in Hämeenlinna, a small lakeside town in southern Finland, and I practice kintsugi. One thing I worried about after moving here was materials. Some of the traditional tools aren’t easy to find in Finland.
A few weeks ago, on a walk near Häme Castle (a medieval brick castle by the lake), I spotted a patch of horsetail (Equisetum hyemale), also known as scouring rush or tokusa. I grew up knowing this plant in China, and seeing it here felt like meeting an old friend.
For anyone who hasn’t used it: dried horsetail stems contain natural silica, so they work like very fine sandpaper. It’s a traditional tool for polishing lacquer in kintsugi. It’s gentle enough not to scratch the vessel, and it comes straight from nature with nothing to throw away.
Finding it means I can keep mending broken pieces here, in a way that feels a bit more sustainable and connected to the place I live. I made a short video about it.
I’m curious:
Thanks for reading, and thanks to this community for all the inspiration 🙏
more on my Ins:eloarc.studio
#kintsugi #horsetail #scouringrush #hämeenlinna #finland #lifeinfinland #traditionalcraft #sustainableliving #slowliving #handmade #EloArc什物誌
r/kintsugi • u/studiohanakintsugi • 10d ago
This tile cracked cleanly into two pieces, so the repair itself was straightforward. The real challenge was the raised llama relief and keeping the kintsugi line as consistent as possible given that it wants pool in the low spots. Finished with 23.5 karat gold lacquer.
#kintsugirepair #kintsugi #studiohanakintsugi
r/kintsugi • u/MissLina128 • 14d ago
I made a purchase back in October and I have had no contact from them whatsoever.
I've since seen at least 2 other posts about them on Reddit so I'm now concerned I've purchased from a fake site.
I've contacted them via email, their contact us sheet, reported it to Shopify and contested the charge on my credit card.
Posting this so no one else makes the same mistake.
u/hikarukint please respond.
r/kintsugi • u/dragonwolf85 • 14d ago
To start off I have never seen actual Kintsugi in person.
On my test panel I can get it smooth and from a distance It appears to be solid brass lines. Yet when inspecting it up close you can see the fine texture of the 350 mesh brass powder. I am using a Silk hankie that I wad into a ball and pull tension on to apply the brass powder.
I have sanded it back with 3k sandpaper and reapplied and I can still see fine particles/grainy texture.
Mainly I am asking is up close in person can you tell that it is powder applied on top of urushi. Does all kintsugi finished product have a fine texture that you can physically see?
I thank you for your time.

r/kintsugi • u/StuffinHarper • 16d ago
I will be in Kyoto for 4 days in just over a week. I have a japanese ceramic cup with sentimental value I broke a few months ago I wish to fix upon my return. This trip was planned before breaking my cup and fortunately allows me to get materials to do so. I would like to repair it using the traditional urushi method so I can drink from the cup again in the future.
I plan to visit POJ studio in Kyoto and purchase their regular or advanced kit there in person rather than having it shipped to Canada as I likely can save a bit of money comparitively. Though it would be more cost efficient to buy everything separately, I like the idea of getting everything I need in one shot. I am open to other kit suggestions but I like that POJ has online videos for their products. I am also not fully opposed to buying everything separately but I'm not sure where to start. How much cheaper would it be to buy things piece by piece and how many shops would I need to visit?
I'd like to purchase a piece or two of broken ceramics while in Kyoto to practice on before attempting to fix my cup and I know POJ sells some online. Does anyone know if they sell in person as well or of other places to look while in Kyoto?
Is there any other tools or materials not in said the POJ kits I should look for? This seems like a hobby I may continue after completing my project.
Edit : Will be in Tokyo afterwards for longer if there are places there too.
r/kintsugi • u/joto7053 • 16d ago
Finishing a project for a charity benefit in a few days. Took longer than I thought, and I don't really have time for the proper urushi sealant you apply and dab off.
Can I apply a modern sealant to protect the silver and prolong the time before oxidation, or is this a terrible idea? Finished pence spent a week in the muro at 80F/80% humidity, a week on my desk (clean up), and has been back in the muro 48 hours.
Perfectly happy to leave it unsealed, personally as the tarnish is pay off the art. but I can just imagine someone at the benefit, thinking, "so pretty... but it'll tarnish and I CAN'T polish it...? PASS". I want to help this non profit all i can.
Thanks in advance for any advice
r/kintsugi
•
u/lakesidepottery
•
17d ago
Through Kintsugi, I brought the broken pieces together using 23.5K gold process, leaving every scar visible. Perhaps we, too, can begin to mend as a nation. Not by forgetting the hatred, cruelty, and harm, but through honesty, accountability, and compassion.
May we find our way back to one another, remembering what was broken and determined not to repeat it.
r/kintsugi • u/studiohanakintsugi • 17d ago
#kintsugiart #studiohanakintsugi #kintsugivase
r/kintsugi • u/dragonwolf85 • 18d ago
Test panel is 3 coats Kijiro urushi then taped the panel off with 2 layers of Polyimide tape and a layer of blue painters tape. "Painted" the grooves with Bengara Urushi waited for it to set up/get tacky then applied the 350 mesh brass powder. Yes a bit messy as this is my very first time doing it so why I kept the tape on. Knew I would make a mess at my first attempt at it.
My idea is I will do this is in multiple layers So eventually it will read as bass filled grooves. So will give the panel a bit of time in the furo. Will brush off any remaining excess then lightly scruff/abrade the surface and repeat the process
r/kintsugi • u/aDorybleFish • 20d ago
After 1,5months of hard work (mostly waiting was the hardest part haha) I was able to finally add the silver powder to this piece. It's a gaiwan lid that belongs to my friend (whom I met on the tea Reddit). After careful consideration we both decided silver was the way to go for this piece. And now all that's left to do is wait another month or so to allow the urushi to fully cure, and then clean up the excess powder. I'm quite proud of this considering it's my first project. (I did start with 5 projects at the same time, four of which are now in the finishing stages. One of them got keshifun, this one got silver and the other two I kept bare (urushitsugi).
r/kintsugi • u/Maer_K • 26d ago
I have someone who was going to build me a cedar muro, but then I had a house fire, so I’m glad I dragged my heels. 😅 In the meantime, we’re looking at a decent temporary solution to use during the year they’ll be rebuilding my house.
This cabinet is unfinished solid pine and big enough for the pieces I typically work on (ie under 12” wide) and I’d keep a wet pan as opposed to spraying the inside.
• He’d retrofit the inside similar to the photos on the right.
• weatherstrip around the door and add latches to keep it sealed
• add a hole for the heating element cord (and seal around it
Do you see any other issues with this set up?
And for the reptile heating pad, does it make more sense to put it at the bottom floor for the heat to rise (might not give off enough heat to be effective) or should I put it on the back wall? Or any other suggestions?
Thanks in advance!
Do you see any other issues?
r/kintsugi • u/al_135 • 28d ago
Overall I'm really happy with them despite the many imperfections. I only used gold on one of them because $$$, and I didn't use metal on the inside of the purple one because I realised that I couldn't reach in with my hand. My insides expecially are still quite rough looking, but I'm excited to work on more! Also managed to not get urushi on me during the whole process so that is a big win.
r/kintsugi • u/MissLina128 • 29d ago
I made an order a week ago and haven’t had any updates on product dispatch. I tried emailing and no answer.
I’m concerned I’ve purchased from a fraudulent website.
r/kintsugi • u/aDorybleFish • Oct 22 '26
Hey everyone!
I'm currently working on my first couple of kintsugi projects. I started them about a month ago and have made some good progress already. Everything is put together and I'm working on some chips for some projects, while other projects only had breaks and hairline cracks so I've now reached the roiro stage with those already.
I've successfully kept the humidity between 60 and 70% during the past month, and the indoor temps were consistently between 20 and 25°C which has worked well for me. Everything has cured so far (I checked with a precision knife) except for that one time I made my kokuso layer too thick and it became wrinkly.
But now the days are getting colder and I no longer can keep the indoor temperatures over 20°C due to the high electricity prices. And I'm wondering how this will affect the curing time. So far I've had to let it cure 1-1,5 week in between layers. •••Has anyone here done kintsugi in lower temperatures and have you noticed a difference in curing time? And how long do you typically cure it for?••• My biggest concern is that I don't end up curing it well enough and either it coming apart when making/drinking tea, or still having urushiol present and leaching into my tea.
I've searched this sub and couldn't find the specific information I'm looking for. I did read that a heating mat might be an option for colder climates but I don't have one and currently can't afford one either.
r/kintsugi • u/SincerelySpicy • Oct 22 '26
From the collection of the Freer Gallery of Art of the Smithsonian National Museum of Asian Art.
Edo Period Hori Mishima Style Tea Bowl
r/kintsugi • u/CrazeUKs • Oct 17 '26
Howdy all. My 3 year old painted a pot at one of those pottery houses.
She then was showing it off and dropped it.
I recognise the chance of it being used as a bowl is slim, but given it has sentimental value, would like to put it back together.
What is the best glue for a fix?
What about the Japanese Kintsugi repair method?
Thanks in advance
r/kintsugi • u/KhreeoftheShire • Oct 16 '26
My late grandmother's Buddha has an interesting crack. It would make for a beautiful kintsugi project one day.