r/knapping • • 12d ago

⚒November Point Challenge🏆 ⚠ 2026 November Point Challenge - Eccentric [Mixed Material Box Prize 🪨 - Last Challenge of 2026] ⚠

15 Upvotes

🏆 October 2026 Point Challenge Winner 🏆

Congratulations to u/Scruffy_is-a_Cat for winning the 2026 October point challenge! I saw a LOT of good entries and was stoked to see how many of you participated! Though I will say that the crystal quartz pocket in u/Scruffy_is-a_Cat's point was really dang sweet. and you all seemed to agree!😁 You can find the submission here if you missed it! 

With the cold months upon us, November's challenge will be the last challenge of 2026. As stated in the 2026 Moderator Check-In post, this is due to the winter weather keeping folks from knapping oudoors. And I wouldn't want to exclude anyone due to climate reasons at all, so we'll be calling it after November, and starting back up in April of 2027! 🌞

But where does that leave us for the FINAL point challenge of 2026... 👀 Well, u/Scruffy_is-a_Cat picked a style that a lot of us have been hoping to try out... Something unique... Something that really allows any flint knapper to bring out their artistic tastes and let the stone guide them... Get your tools ready because we're wrapping up the 2026 challenge season with the...

⚒ 2026 November Point Challenge - Eccentric ⚒

This selection of 12 Mayan eccentrics were collected from different caches on sites believed to be in Belize. They all represent very good examples for the various styles they represent.Most of them are bifacially flaked. But some of them still retain a portion of the original flake scar on one side. They illustrate just a few of the multitude of different forms that have been found. It's obvious that some of them are meant to represent animal forms and others non animate geometric forms. They were all made of good quality cherts that has become heavily patinated. The largest example in this group,the serrated ring, is approximately 4 1/4 inches (10.7 cm) in diameter.

This might be the first time a few of you have heard of an eccentric, so I bet you're asking what on earth are they? 🤔

Eccentric pieces are non-utilitarian, highly intricate chipped-stone pieces that could've been effigies, jewelry, gifts, symbols of status, display of skill, served ritualistic purposes, or a combination of any one of these things!

Eccentric Flint from around 600–900 CE

It should also be noted that there are some EXTREMELY talented knappers that've made some simply outstanding eccentric pieces! Take a gander!

Jake Webster Eccentrics
John Kiernan Eccentrics
Another John Kiernan Eccentric that I really like!

If you want to read up on them, I got a few awesome collections of resources linked below!

[Pictured Directly Above - Eccentric Flint - Cleveland Museum of Art]

[Lithics Casting Lab - MAYAN ECCENTRICS]

[Dumbarton Oaks - Late Classic Eccentric Flint]

[Museum Associates - Spider or Tick Eccentric Flint 600–900 CE]

🚨 Be sure to read the rules before doing so you don't get disqualified! 🚨

⚠️ Rules ⚠️

  1. The point must be a recognizable Eccentric (point, effigy, art piece, sky's the limit!) knapped in November of 2026! - We want to see fresh submissions and fresh points! No using any of your prior work!
  2. Only one entry per person! You are not allowed to post your point multiple times, OR have multiple points in your submission post! - Be sure to take good pictures showing off your work! lighting, material translucency, flaking, etc. 😉
  3. The challenge submission window OPENS 11/24/2026 and CLOSES 12/1/2026 - This gives 1 week for entries to be submitted and voted on, with the official winner and next month's challenge post being announced sometime within the 1st week of November.
  4. Post MUST have the monthly knapping competition post flair to count! - That way, it can easily be found and the votes counted! If you wish to participate without entering, simply use any of the other post flairs
  5. No material restrictions - We only require that the point be knapped out of the material that you've chosen (no grinding out a point!)
  6. Moderators hold the authority to disqualify any participants who violate these rules, as well as our community rules - We want this to be a fair and engaging challenge for all those who participate! Because it's always fun to see what different folks can do with different tools!

If you have any questions or comments about the rules, feel free to reach out to the moderators through comments, DM's, or Messages! 📬

📸 How To Enter 📸

You can start creating your point as soon as this post goes live! Just remember that you WON'T be able to submit it until the post flair below is made public between 11/24/2026 and 12/1/2026!

Once it is public, be sure to select it when uploading your photo(s) and that your submission conforms to the rules listed above! ☝️😉 I will be sure to make a post letting everyone know when things go live as an extra reminder, and this post will also be pinned to the top of the subreddit for easy access!

🥇 Prize 🥇

Went through my little box of assorted goodies and put together a snack mix of rock! Expect some weird and exotic stones in here, and I'll throw in a couple bifaces for good measure! 😎 Hopefully y'all like what I've been able to assemble, and just know that there are some nifty hunks hiding under that pile... 🌚

The winner will also get the chance to choose the point style for next year's 1st knapping challenge, and if they so choose, they can also donate their winnings to a fellow competition participant or allow their winnings to serve as next month's prize! 🥳

If you'd ever be interested in donating material/tools for these challenges, feel free to comment below this post or shoot me a DM! I'm always happy to work something out with folks! Especially for unique or interesting material.

🗣️ In Closing 🏹

It's been so much dang fun seeing what y'all have made over the 2026 challenge season, and I am STOKED to get to photoshop 2027's banner image using all of the cut-outs I've made of each point entry. With these eccentrics, I have zero doubt that 2027's banner will look so damn sweet! I'll post it in the exact same way I did for the 2026 Moderator Check-in, along with similar update materials. Thinking about doing 'expert' and 'beginner' challenges for next year... More on that in the future check-in post though... 👀 Until then, I can't wait to see what eccentric pieces y'all end up making!

If any of y'all have questions or thoughts, leave them in the comments section below 👇 And keep your eyes peeled for those event and submission window announcement posts. Like I mentioned, everything will be pinned to the top of the sub along with the guides for easy access.

Looking forward to seeing what everyone makes, stay safe, and happy knapping everyone!👋😁

- u/SmolzillaTheLizza 🦎


r/knapping • • Jul 22 '26

Welcome to r/knapping!

21 Upvotes

r/knapping • • 15h ago

Made With Modern Tools🔨 I see how this months going to be….

Post image
21 Upvotes

I can’t pretend I didn’t learn anything!


r/knapping • • 10h ago

Made With Modern Tools🔨 If you squint it’s like it didn’t happen.

Thumbnail
gallery
7 Upvotes

Been holding onto this biface for several years now. Don’t know if I opened a seam or bent the point or what.


r/knapping • • 17h ago

Question 🤔❓ Unsure where to go with this preform

Thumbnail
gallery
8 Upvotes

Working on this piece today and getting to a point where I’m unsure where to go. I’m relatively new to this craft and I am still struggling to get my points as thin as other people.

I can get to this stage with decent results, but I usually end up snapping it or making it so small that it’s useless, and notching continues to be a problem especially with these thicker points.

Where do I go from here? Is the answer just more practice?


r/knapping • • 11h ago

Question 🤔❓ How much do I need to worry about shards getting in my clothes?

1 Upvotes

Just starting, I plan to put up a tarp, multiple layers of pants, (what happens if shards get in the washer??) a towel on my lap, rubber and leather leg pads, gloves, safety glasses. I'm still worried about it getting in my clothes. Is this enough?


r/knapping • • 1d ago

Made With Modern Tools🔨 Tried a hardaway dalton type with some rough quartzite.

Thumbnail
gallery
20 Upvotes

r/knapping • • 1d ago

Tool Talk 🛠️ I think it might be time for a new mallet

Post image
34 Upvotes

Finally gave out. I’ve probably swing this thing thousands of times at this point. Now I gotta get used to a different one 😂


r/knapping • • 2d ago

Material ID 🪨❓ What type of material is this??

Post image
14 Upvotes

r/knapping • • 2d ago

Question 🤔❓ Need Spalling Help in Central Oregon

Thumbnail
gallery
6 Upvotes

New to knapping and need some help spalling a large piece of material I collected. Anyone in Central Oregon interested in meeting up and showing me how to spall? I'll share some of the material with you for the advice and instruction.

I think it's Chert, but I do not know for sure. New to rock identification as well, lol.


r/knapping • • 3d ago

Made With Modern Tools🔨 [Commission] Ishi-Style Hunting Broadheads 🏹

Thumbnail
gallery
81 Upvotes

Howdy again everyone! 👋

Finished up my first hunting broadhead commission here recently! Had a friendly fella come along and commission some Ishi-style hunting points from me for pig/deer hunting, and to say that I'm happy with how they turned out is an understatement! 😁

That meticulous edge sharpening took me a while since I learned how important it was to ensure proper function. Coupled with the expanding notches, needing to stay within regulation size, symmetry, and weight, I had my work cut out for me. Also for the materials I used Burlington Chert and some Obsidian as requested. Plus a Novaculite one I threw in there as a surprise. 😉

All in all everything came together and I can't wait to see them put to use! These will actually be my first ever functional pieces, so I eagerly await to hear how they'll perform. 🙂‍↕️ If you have any questions or comments do let me know! I'll answer them to the best of my abilities!

Stay safe and happy knapping all!

- u/SmolzillaTheLizza


r/knapping • • 3d ago

Made With Modern Tools🔨 Vibin

Thumbnail
gallery
23 Upvotes

r/knapping • • 5d ago

Material ID 🪨❓ Guess the material

Thumbnail
gallery
108 Upvotes

I know but want to see you guys think!

EDIT; it’s not a glass

EDIT 2; we have a winner! It’s synthetic garnet.

It’s a lot like glass to work but harder and tougher, platforms perform better and you can blast through steps fractures and stuff a bit easier


r/knapping • • 5d ago

Question 🤔❓ Resources on how to spall this well?

Post image
13 Upvotes

Howdy folks, I picked up this 9lb chunk of obsidian on Marketplace yesterday for 15 buckaroos. Any tips or video recs on how to get some good spalls off of it? Wanting to avoid as much waste as I can! Thanks :)


r/knapping • • 6d ago

Made With Modern Tools🔨 Old account was hacked

52 Upvotes

r/knapping • • 6d ago

Made With Traditional Tools🪨 My very first basalt axe!

Thumbnail
gallery
22 Upvotes

I sourced the basalt from a railroad track and I also have this very good price of granite I picked up from a trail near my house so technically this tool is 100% locally sourced!


r/knapping • • 7d ago

Tool Talk 🛠️ first toolkit! (of many)

Post image
28 Upvotes

Just posting to feel proud of my first set of tools! Spent the better part of a few months hunting various hammerstones, sourcing a shed antler, and even finding some (barely) workable stone in the wild. Popped in here for some advice on the antler, as I'm being a pain and used zero modern tools to make these. Working on some initial glass practice until I can afford good stone, but happy with with nonetheless. Will I ever use the huge spalling hammers? Probably not. Anything else you guys would recommend getting ahold of? Thanks!

And don't make fun of my half finished baton cut, my forearms are too sore to finish it this week because I'm cutting it with the crudely pressure flaked chert saw there 😅


r/knapping • • 8d ago

Made With Modern Tools🔨 Oh no it’s got some hinges. Better throw it out.

Thumbnail
gallery
83 Upvotes

Definitely the craziest width to thickness ratio I’ve gotten on a biface. Mostly luck. Kinda thinking about doing something eccentric for this month’s challenge. Kinda don’t wanna break it.


r/knapping • • 9d ago

Made With Traditional Tools🪨 Burlington Eccentrics

Thumbnail
gallery
61 Upvotes

Figured I'd put some of my examples of eccentrics out for folks to see, maybe some inspo for the challenge.

Absolutely love how freeing it feels to not worry about any one particular shape or typeology when making one.

All this was white tail deer antler percussion buffalo rib bone and ulna bone pressure. The real fine skinny notch and serrations were done with a flake of a different material.


r/knapping • • 9d ago

Question 🤔❓ Blade reccomendation

Post image
5 Upvotes

What kinda saw blades you guys using?

Picked up this Diamond pacific slab saw but the blade isn’t suitable for flint, just keeps glazing

Is a cheaper concrete type blade going to do the job?


r/knapping • • 9d ago

Material Showcase 🪨📸 Finally starting to process some of my stash

Post image
63 Upvotes

Sat down for a short session of trimming bottle bottoms. Got a ton more waiting.


r/knapping • • 9d ago

Made With Modern Tools🔨 A Collection of Finicky Florida Coastal Plains Chert Points

Thumbnail
gallery
30 Upvotes

Howdy again everyone! 👋

Got some coastal chert points here for you all today! I forget which type this is, but it's the white stuff from Florida. Strangely temperamental when it comes to being worked due to the pockets and crystals inside of it. Some REALLY cool fossils though, and I managed too get a nice enough cluster out of it. 😊

I also have a couple YouTube videos I made with this stuff, so you can check them out here:
- [Unboxing Florida Coastal Chert Package]
- [Coastal Plains Chert Heat-Treatment Results]

Som fun stuff overall, but I'd hate to work it raw. If you'd be able to wrangle it, it'd make for some ROBUST projectile points. Super cool material overall and super happy I got the chance to mess with it! 🙂‍↕️

As always let me know which one(s) you like the most and if you have any questions. Stay safe and happy knapping all! 😁

- u/SmolzillaTheLizza 🦎


r/knapping • • 11d ago

Made With Traditional Tools🪨 It's nice to know that native knappers also had flakes run short, stacked up hinge fractures, and tossed the piece just like I do.

Thumbnail gallery
30 Upvotes

r/knapping • • 11d ago

Made With Modern Tools🔨 Just glassin’

Thumbnail
gallery
43 Upvotes

Found a new obsidian quarry with some great material in it. There’s contamination in the glass that cause some weird flaking but allow some great opportunities to increase my skills.