r/knifemaking • u/HelixKnives • 3h ago
Showcase Just wrapped up this Hunter. Cross cut mango with a clover mosaic pin.
r/knifemaking • u/MyWorkThrowawayShhhh • Feb 21 '18
r/knifemaking • u/real_clown_in_town • Dec 22 '23
Hello all, after quite some time I have decided to reevaluate, the old rule preventing sales posts and self-promotion. The rationale behind the change is that the makers will benefit from community support. There has been hesitation to change the rule based on the idea that sales post will run rampant if allowed; however, I have some requests in exchange for those who want to post a link to their website.
All criteria must be met.
There are a few additional limitations to this change
I hope that this change to the rule is favorable, if you have feedback or comments, I would like to hear it and may make changes accordingly.
r/knifemaking • u/HelixKnives • 3h ago
r/knifemaking • u/DoctorIllustrious182 • 13h ago
Just wrapped up this custom Pikal for a customer, and I wanted to share it with the other makers here.
This was a fun project because it's quite a departure from the hunting and everyday-use knives I normally build at Skelton Knives. The customer had a particular design in mind, and we worked through the details to bring it together.
Build specs:
- Steel: 80CrV2
- Blade: Approximately 3.5"
- Overall length: 8.5"
- Grind: High flat
- Finish: Ferric chloride etched, graphite gray
- Handle: Textured black canvas Micarta
- Liners: Black G10
- Hardware: Stainless steel pins and lanyard tube
- Sheath: Custom-fitted black Kydex with adjustable belt clip
- Heat treatment: Done in-house
The entire blade was etched for a uniform graphite-gray finish, and I textured the Micarta for a secure grip.
Definitely enjoyed stepping outside my usual designs on this one. Always interested in hearing what other makers think!
Thanks for looking!
r/knifemaking • u/Grimmjow_Is_Gay • 31m ago
15n20 steel blade
Hidden tang
Brass bolster with silver solder
Hickory wood handle
r/knifemaking • u/Impossible_Fail7984 • 19h ago
Leather workers small set :) Skiving tool and scalpel tipe knife :)
r/knifemaking • u/Icy-Control9525 • 15h ago
Im just excited, made 2 knives this week. First two ive ever made.
r/knifemaking • u/HumanRestaurant4851 • 19h ago
r/knifemaking • u/Putrid-Office-558 • 14h ago
r/knifemaking • u/m_Baywatch • 19h ago
52100 8" (214mm x 85mm) multi purpose cleaver. This is meant to be a do it all knife.
Was taken to a near zero grind with very slight convexity. Then I put the edge on with stones - Shapton Pro - 120, 1000, 2000, Morehei 4k & 0.5 micron Diamond stop. It is hair popping.
Handle is thuya wood with buffalo horn - taken up to 1000 grit, then treated with 2 coats of Tried and True original finish.
Measurements:
52100 steel
Heat Treated to a 63HRC target, verified with files.
Edge length - 214mm
Height at heel - 85mm
Height at tip -63mm
Full distal taper
Spine thickness:
\- @heel - 0.20"
\- @tip - 0.048"
12mm behind the edge - taper from 0.040" to 0.031"
3mm behind the edge - 0.012" to 0.010" @ the tip
r/knifemaking • u/CmonNickname • 1d ago
Inspired by a recent post where someone (u/Ineedmoreknives) built a pair of kitchen knives for a wedding, I wanted to show you a pair I built last year for the wedding of very good friends of mine.
Steel is Gingami 3, 61HRC
Shape is leaning in the direction of modern Japanese knives, because they both love Japan and the Japanese cuisine.
Handle is made from 3 different woods:
- Swamp oak from his origins
- acacia from her origins
- bound by birch, wich resembles love, family and rebirth in European tradition.
Sorry, I dont have better pictures because I finished them very short before the wedding weddingday and forgot to take proper pictures.
r/knifemaking • u/PinkmagicK • 18h ago
At the half way point with these two new prototypes! I've had these two in my head for a while now, and it's nice to finally see them take life!😁 I always love how rough and bad they feel to grip at this point, but you can get a general sense for what they will soon be and look like, that's exciting to me. Both these Opal and abalone micarta scales are gonna POP! I think the hawkbill looks awesome but will be a bit more polarizing, the Tadpole on the other hand is pure fire!🔥 If you like short stout knives with a ton of character, this one is gonna be for you!😎 Very hand filling, but it'll still be slim and lightweight, like all the rest of my knives. See you guys at the finish line 🫡
r/knifemaking • u/Stiv11 • 19h ago
In order :
Bunka 175mm
49 layer damascus, 1084/15n20 steel, hand forged
Ebony, Canary and Ziricote wood handle
Bunka 165mm
48 layer damascus, 1084/15n20 steel, hand forged
Ebony and Wenge wood handle
Santoku 170mm
1095 steel, stock removal
Black Walnut and Olive wood handle
Nakiri 155mm
1095 steel, stock removal
Canary and Wenge wood handle
Happy to hear what you think of them!
I’m at a point where I’m confident enough with the quality of my knives to give them to friends and get real life use feedback.
I need to refine my heat treating process and get better at etching and finishing my damascus before considering putting a price on them.
Upping the layer count would also be great, but I am a small guy and hand forging is hard.
Cheers!
r/knifemaking • u/wolfandravenforge • 18h ago
I just got this hammered out. Its my first go around at trying a mushroom/gardening knife. Most of what I went off of were pictures. Wanting to make this as something to be used by a professional gardener. I wanted to share here for advice/feedback. Is it too short, too curved, too much of anything? Is it not enough of something? Any advice would be welcomed. Thanks in advance. Also everything i saw was with hidden tang and I really don't like going that route so im attempting full tang. This is straight out of the forge with no grinding also. Appreciate you all thanks!
r/knifemaking • u/Hayd108 • 23h ago
O1 blade and spring, nickel silver bolsters and liners, Ebony Covers, Copper Pins.
r/knifemaking • u/parashot13 • 16h ago
Just finished this Cowboy Cleaver out of an extra wide rasp, with purple heart wood handles. This was my first time playing with purple heart and I love it
r/knifemaking • u/Kaz309 • 10h ago
Hi everyone, I’ve been really interested in making knives specifically for cooking this last year. I’ve been trying to find a place to forge but unfortunately there aren’t any near me so I decided to settle for stock removal for now. I want to try and make a nakiri doing stock removal using 1084. I’m not entirely sure if this is possible or a good idea. If it is I was wondering what would be needed to get started.
Edit: I forgot to mention I live in an apartment so some tools I may not be able to use. I have access to the backyard and can pretty much do whatever I want there, so using something like an angle grinder I believe is fine
r/knifemaking • u/Dizzy-Friendship-369 • 1d ago
From being a junkie for most of my life and being homeless. To having new hobbies and having something to show for.
r/knifemaking • u/Fox-River-Blades • 1d ago
r/knifemaking • u/Putrid-Office-558 • 1d ago
r/knifemaking • u/Mission_Bid_1884 • 1d ago
Fresh off the bench! Hand forged 410 stainless / 26c3 san mai blade . Vintage canvas micarta handle with san mai inlays and stainless steel guard .
r/knifemaking • u/Jufimbo • 2d ago
Some work from the last few months. Mostly 89crv2 but some w2 w hamons. All the wood is stabilized. All the leatherwork is hand stitched and my fingers may now throw correctly for a month. Thanks for looking!
r/knifemaking • u/INeedMoreKnives • 1d ago
8.5in chef and 5in petty both in 19c27 with stabilized claro walnut handles
r/knifemaking • u/Vincent_Jules69 • 1d ago
Both 1084
Natural iron bark with Tung oil finish
Natural wenge with Tung oil finish
r/knifemaking • u/HawkComprehensive178 • 1d ago