r/lighters • • Aug 01 '26

DISCUSSION : An announcement regarding the use of AI, and other subreddit updates.

28 Upvotes

I'm happy to discuss or debate the use of AI with anyone that supports or encourages the use of it. What I do not tolerate is copy-pasting AI slop answers without taking even a moment to verify that the answer is correct.

This thread was prompted by a recent interaction that started with a hilariously wrong identification that could have been avoided if the original commenter took all of two seconds to use his eyes to verify. It ended with AI techbro nonsense about "people who are too scared to use computers". Like I said, I'm happy to debate this with anyone as long as it's in good faith, but if you refuse to counter or even acknowledge the points in the discussion then it's pointless.

AI is a useful tool, but it is still just a tool. Most of us grew up being told that wikipedia is not a valid source because it can be edited by anyone. AI is no different, but AI is guaranteed to have vacuumed up all the wrong answers alongside the right answers and so requires verification EVERY TIME. I have no problem with anyone that chooses to use AI for their own personal reasons. There is the moral/ethical/resource debate behind it, but that belongs in a different subreddit.

This is not the first time I've had this debate with people copy-pasting AI summaries or identifications. A few times it has been harmless, an older collector that put a bit too much faith in a new technology, and it ended amicably. Unfortunately the majority of interactions end with a techbro insisting that AI is ALWAYS right, we just aren't "using it right". As far as I'm concerned, it won't be "right" if you can't ask it a question in plain English and have it understand context and intention. They'll insist you're using the wrong AI, or using the wrong "syntax" when asking your questions - In other words, you need to know how to guide and lead it to the correct answer, which typically means you already know the correct answer.

I ended that discussion with what I feel is a valid argument. It would take me 5 minutes to use AI to code a bot that would instantly and automatically answer every question in this subreddit with what it believes is the correct answer. That is not what this subreddit is for. This subreddit is for the human passion and enthusiasm for this hobby, for the experts obsessed with the little details, the niche facts, and just pure discussion. Talking with other people that share that passion, making connections and discoveries together. Sure, a lot of the questions posted here can be answered quickly, but the real nerds come out when there's historical discussion to be had.

There is no place for "This has a chance to be the right answer but I can't be bothered to take 5 seconds to check". Anybody that makes a habit of providing these vague or incorrect answers will be banned because they are not going to contribute anything useful. Anybody that tries to defend an obvious falsehood because "AI told me so" will be banned.

Anybody posting images that are obviously AI generated or "enhanced" will be banned. This hasn't been an issue here yet, but it has become a major issue on Ebay and other retailers, with sellers using "enhanced" images to show how a lighter could look if it were in perfect condition - And usually the AI doesn't understand the mechanics of the lighter and puts the flame in the wrong spot. It's pure slop.

Like I said, I'm still happy to discuss it, but this is not the first time I've tried debating the AI slop bros. It always ends the same way.

I will leave this thread open for discussion, but I will be keeping a close eye to ensure it doesn't get too rowdy.


r/lighters • • Jun 26 '17

Before making a post about asking for help to identify your lighter, read this!

176 Upvotes

Recently there are some people who want help finding out what their lighter looks like, but only take one photo of the front. This is not very effective, and it will only make it a lot harder for us to help you.

Here is a guide on what photos you should take of your lighter. if the guide is not clear enough, please let me know and i can make some adjustments.

reposted due to spelling issues in the title.


r/lighters • • 4h ago

Show&Tell My mostly Ronson lighter collection so far

Post image
42 Upvotes

Most are working except a few of the wedgwood table lighters which I havent got to yet


r/lighters • • 2h ago

Zippo recherché

Thumbnail gallery
3 Upvotes

r/lighters • • 22h ago

Show&Tell Maruman GL-67, aka "Baroque"

Thumbnail
gallery
79 Upvotes

I got this lighter today. It was kinda grail for me, when it comes to Japanese butane lighters of the 70's and 80's.

When I bought an IM Corona Old Boy, I also wanted one of these for comparison.

Here's my Old Boy:
https://www.reddit.com/r/lighters/comments/1x7en3k/im_corona_old_boy_and_im_not_even_a_pipe_smoker/

Prices are high for both. So I waited until something acceptable showed up. It was this one. I paid 40€ + shipping. Consider the condition with box and manual, I did good, I think.

It had a clogged adjustment sponge, but was quickly disassembled. However, removing the foam required some knowledge. So I watched some YouTube videos. While doing so, I realized, that the GL-57 isn't the pipe lighter version, but rather the predecessor of the GL-67, where the filler valve and the adjustment screw are separate parts instead of one unit. Instead, both exist as pipe and cigarette lighters.

Since the sponge is covered by a small metal disc, it's not possible to pull it out from the bottom. I had to push it from the top through a tiny hole, after removing the flame valve. A piece of high e string from an electric guitar did the trick. After some cleaning, a new sponge and oiling the old gaskets, it works now. The two bits in the last pic came also handy.

One note, filling it up with the adapter is so noisless, almost like it doesn't get any butane, but it works.

And how is it? Does it live up to the hype?

Well, it's simple to service, the design is not a copy of another design. It's a liftarm but unlike any other, especially in 1969, when they came out. The Old Boy looks like a ever so slightly redesigned Dunhill Unique.

Have you seen that roller bearing in the liftarm? That's insane, look again.

In direct comparison to the Old Boy, the latter wins, slightly. It's taller, so better to handle for me.

I also don't know what metal was used. It's some cast metal, but I don't know what type. But looking on the internet, they seem to hold up well. I didn't see broken parts yet.

They came in several finishes. While I thought, that mine was silver plated and developed a patina, it's actually faux patina. If I could pick one version, I'd probably choose a simple chrome plated over faux patina.

Also the tank, made from brass, doesn't seem to prone to cracking, unlike, what I've heard about the Old boy, when you drop it. But it's also smaller.

The Old Boy also has manufacturer support, while Maruman stopped making lighters long ago.

So, both have some ups and downs, but none of them is bad.

The Old Boy is like a thinking man's alternative to the Dunhill Unique, while the Baroque is truly unique.

But if you collect lighters, for the sake of it, you should probably buy both.


r/lighters • • 13h ago

Refillable Bics

Thumbnail
gallery
11 Upvotes

I posted about my refillable Bic a month ago, and someone commented that "now you'll lose it", and they were right. After refilling it about 60 or 70 times, I lost it. So i made a new one. The only filling port i could find that would work was threaded, not like my last one. And this port would leave the needle type part of the valve sticking out almost an eighth of an inch. I couldnt screw it further in because the thickness of the bottom of the Bic wouldn't allow it. I thought about placing the port on the side of the lighter, but that just seemed stupid. So i drilled a hole in the bottom of the volunteer Bic (black), threaded it and screwed in the port. Like i expected, the needle stuck out about 3/32. So i sacrificed another Bic(also black), drilled the same sized hole in the same location, then used a hacksaw to slice off the bottom 1/8. I cleaned it up and glued it on, then used superglue and baking soda to fill it in with enough room to fit the filling can. 20 or so refills and no leaks yet!


r/lighters • • 35m ago

Help How do I fill this Molectric 88?

Thumbnail
gallery
• Upvotes

I got this from an antique store recently and for the life of me I can't figure out how to fill it.

I did my research, bought a pack various nozel heads for the lighter fluid. I used the one pictured because my research (and ChatGPT) said it was the one to use.

But no success. I really like this lighter and I'd love to get it working, any help is much appreciated!


r/lighters • • 6h ago

Spark doesn’t work on this Poppel lighter

Thumbnail
gallery
3 Upvotes

I replaced the flint 2 times and it doesn’t work. Any tips?


r/lighters • • 1h ago

Does it worth to fix it?

Thumbnail
gallery
• Upvotes

Gas leaking from the top and gas ends in a day.


r/lighters • • 11h ago

Is this legit? St dupont

Thumbnail
gallery
6 Upvotes

It was a gift from a friend coupe years back. Wondering if there's any guidance on figuring out if it's gen or not and how much it might be worth.


r/lighters • • 10h ago

Need to repair vintage lighter

Enable HLS to view with audio, or disable this notification

3 Upvotes

I found this old lighter from 20 years ago. The spark still works but when I tried filling it, I could hear the gas leaking out and it still wasn't lighting up.

Can someone tell me how I can restore this lighter.


r/lighters • • 20h ago

Collection My non zippos

Post image
9 Upvotes

r/lighters • • 21h ago

Dunhill & Ronson Lighters

Thumbnail
gallery
11 Upvotes

My girlfriend and I went to an antique store today and picked up these vintage Dunhill and Ronson lighters. Does anyone have any information on either of them?

Neither is currently working. I’m planning to pick up some lighter fluid and flints, and possibly new wicks and cotton. From what I’ve been reading, it sounds like I should try the existing wicks before replacing anything.

The striking wheels are a little corroded, but I guess that’s to be expected given their age. Any advice on getting these working again or additional information on the lighters would be appreciated!


r/lighters • • 22h ago

Tiffany and Company Thorens Swiss Green Onyx Antique Lighter

Thumbnail
gallery
6 Upvotes

r/lighters • • 1d ago

HANDMADE BIC LIGHTER SLEEVES

Thumbnail
gallery
14 Upvotes

Hey everyone, I’m trying to reach a bigger audience with these handmade Bic lighter sleeves I’ve been making.

Handmade using Sculpey polymer clay and finished with two coats of Sculpey gloss glaze.

I take my time with each one, making sure it’s properly finished and up to my standards before putting it up for sale. Being handmade, some may have minor imperfections such as fingerprints, irregular shapes, a seal that’s too tight, or not always standing upright. I do my best to screen for these before selling.

I’ve got a few available and figured I’d share them here. Feel free to reach out if anyone’s interested.

Appreciate you taking a look!

(P.S. If sold, I can always remake.)


r/lighters • • 1d ago

My newest addition..

Thumbnail gallery
7 Upvotes

r/lighters • • 1d ago

Is there anything valuable here?

Thumbnail
gallery
8 Upvotes

r/lighters • • 19h ago

Help Hello, I need some help with this

Thumbnail
gallery
2 Upvotes

Hello, I was wondering if this lighter could work. I don’t know if it’s missing any parts or how to refill it. It makes a tiny spark. Thank you.


r/lighters • • 22h ago

Made In Japan Lighter KW style? Lighter

Thumbnail gallery
3 Upvotes

r/lighters • • 23h ago

Help Advice on Arirang Flint (zippo copy)

Enable HLS to view with audio, or disable this notification

3 Upvotes

This lighter has all the same mechanical parts as a zippo but is not a zippo and doesnt use the same sized parts. Need advice


r/lighters • • 20h ago

costumizable lighter as a gift

1 Upvotes

I want to gift my gf a lighter with the image of Gustav Klint’s “The Kiss”. Does anyone know a good shop in Europe that ships customizable lighters and/or BIC lighter cases to Switzerland or Europe im general? thanks


r/lighters • • 21h ago

Help How do I fix the hinge on my lighter?

Post image
1 Upvotes

I dropped my lighter, a knockoff DuPont Sleeping Mermaid, while it was open and now the top doesn’t close the entire way anymore. Is there a way to fix this myself? Take the hinge pin out and do something? I don’t think the gap will bother me that much but it doesn’t make a pleasant sound whenever I close it anymore.


r/lighters • • 2d ago

Vintage/classic cigarette case pocket lighter

Enable HLS to view with audio, or disable this notification

100 Upvotes

Bought this years ago on a roadtrip from an antique store for about $20, only just decided to try get it working. Pretty sure it's a petrol lighter and not a butane chamber - wick, flint, cotton inside. Still sparking 🙏


r/lighters • • 1d ago

Help Lighter leaking butane issue

Thumbnail
gallery
6 Upvotes

Just received this heirloom. I'll fill it with butane and after 20 minutes, it's empty. Does anyone know what to fix here?


r/lighters • • 1d ago

Help Help fully identifing and fixing a old lighter.

Thumbnail
gallery
6 Upvotes

I picked this up a thrift store not to long ago. I cleaned it up and put fresh flint and lighter fluid, but it doesn't like to light often at all, not even spark doesn't matter how hard you press it or at what angle, I wish I can post a video but can't do that and photos. I'll be happy to answer any questions.

It seems to be roughly from the 1960s but no date to be seen, might be under the sticker. And is by Frank Schirman, made of coral.

If anyone can give any advice on fixing the lighting mechanism or a drop in replacement. That would be very appreciated.

I hope you guys like this thing as much as I do.