r/linuxhardware • u/Important-Spirit-912 • 19h ago
r/linuxhardware • u/wetware_enthusiast • 15h ago
Discussion Intel core ultra 2 bug when swap enabled, swappiness=0, and under memory pressure
Not here to ask for support, firstly. I've asked a lot of people and no one really knows what it is.
I was wondering if anyone could corroborate my experience with Lunar Lake.
Info: 15ILL9, 256V, 16GB, OS: Tumbleweed, Kernel: 7.3.1-1
Steps to reproduce issue:
- Create a swap file or partition
mkswapand thenswaponsysctl -w vm.swappiness=0- Type
free -hmand look at "Available" - Open a shell and compile this program. Replace GB with the allocation size that's about 1-2 GB less than available.
- Kwin Debug console and observe sharp spikes in the `showfps` effect (see below) after a few minutes of using Firefox, KDE, and other programs
- Open
- Ctrl+C the program
- Observe that lag is gone.
This has affected a ton of things. Minecraft. Terraria. I think it might be a bug with the Intel xe2 driver, possibly? It only happens when swap is enabled, but disabled via swappiness. I have to type swapoff to make it stop.
Picture of frame times from the plasma debug tool showing insane paint times. At the bottom you can see the baseline deviations in performance.
If you have a Lunar lake laptop, is this something you've ever had?

r/linuxhardware • u/Impressive_Tower_550 • 21h ago
Guide Ubuntu 26.04.1 LTS on a ¥24,000 (~$150) used Fujitsu LIFEBOOK U9311/F (2021, Made in Japan) – repurposing it as a home server
Picked up a used Fujitsu LIFEBOOK U9311/F for ¥24,000 (\~$150) and put Ubuntu 26.04.1 LTS on it. Here's a quick report.
**Hardware**
* Model: Fujitsu LIFEBOOK U9311/F (FMVU34011), manufactured Nov 2021, Made in Japan
* CPU: Intel Core i5-1145G7 (4C/8T, 2.6 GHz base / up to 4.4 GHz turbo)
* GPU: Intel Iris Xe Graphics
* RAM: 8 GB LPDDR4 (soldered, not upgradeable)
* Storage: 128 GB PCIe NVMe SSD
* Display: 13.3" 1920×1080
* Weight: from 756 g (lightest config, per Fujitsu)
* Extras: Wi-Fi 6, fold-out full-size Gigabit Ethernet port, Thunderbolt 4, SD card slot
**Software**
* OS: Ubuntu 26.04.1 LTS
* Desktop: GNOME (stock)
* Wallpaper: stock 26.04 "Resolute Raccoon" wallpaper, nothing custom
**Tested and working**
* Wi-Fi (out of the box)
* Japanese keyboard layout detected correctly during install
* Tailscale
* Python 3.14 + FastAPI
* PostgreSQL 18
* Node.js
**Known issues**
* Tiger Lake Fujitsu models (U9311/U9312/E5411) have a known BIOS bug that can cause a black or flickering internal display after resuming from suspend. Not a problem for me since I'm disabling suspend anyway.
* fwupd doesn't support this model, so update the BIOS from Windows *before* wiping it.
**Plan**
Running it as a small always-on server (PostgreSQL + FastAPI + cron, accessed over Tailscale). Will report back on idle RAM usage.
r/linuxhardware • u/emirdev_mo • 3h ago
Product Announcement Getting Windows-only USB gadgets (AIO LCDs, RGB hubs, case screens) working on Linux from a USB capture
A lot of the hardware I see people ask about here works fine on Linux at the USB level, the only thing missing is the vendor app: AIO coolers with an LCD, RGB controllers, fan hubs, little case screens. Getting one working usually means the same manual routine: capture the vendor app on Windows with USBPcap (or usbmon in a VM), then diff hex until you find which bytes are the brightness, the fan speed or the image header.
I got tired of doing that by hand, so I built usb-rea. You capture while using the vendor app, write down what you changed and when ("brightness 20, 50, 100"), and it groups the packets into commands, finds the constant headers, counters, value fields and checksums, and writes a Markdown protocol report plus a small pyusb driver you can try on Linux. It also tells continuous image streams (JPEG or raw RGB565 frames for LCDs) apart from the actual commands, which was the thing that kept tripping me up on cooler screens.
Before decoding anything, it checks the VID:PID against devices that already have an open source Linux driver (liquidctl, OpenRGB, the Thermalright and Turing screen projects and others), because often the answer is "this is already supported, use X".
A real example: someone on the liquidctl tracker shared a USBPcap capture of an ASUS TUF LC III LCD. usb-rea found the brightness command on EP 0x01 and the JPEG frame stream with its per-frame ack on EP 0x03. That capture also exposed two bugs in my parser, which are now fixed and the trimmed capture is a test case. Write-ups of that and a few other devices are in docs/case-studies.
It is MIT licensed, pip install usb-rea, Linux and Windows captures both work. Honest limits: it is still alpha, it needs labelled captures to infer value fields, and a matching USB ID does not prove your unit speaks the same protocol, so read the report before writing to a device.
Repo: https://github.com/emirmrkaljevic/usb-rea
If you have a Windows-only USB gadget you would like on Linux, I am happy to look at a capture.