r/makerspace • • 20h ago

Multi-use hobby station reccs

Thumbnail reddit.com
1 Upvotes

r/makerspace • • 1d ago

Maker Space users and owners; could you please take my thesis survey?

8 Upvotes

Hello! My name is Ronn, I am an interior design student from SOCAL. I am gathering research for my senior thesis project, which explores how a Maker Space can become this place where people in low-income communities, or even small business owners, can work on personal projects, access shared equipment, and learn from professionals to give them opportunities that might be easier to find in other areas. 

This questionaire asks about your hobbies or small business and what barriers you might expereince in the process of creating things you love. Your response to these questions will be used for academic research and design development. 

What is a makespace? 

A makerspace is a shared workspace where people can create, build, and learn using tools, equipment, and materials. It may also offer classes, mentorship, and opportunities to collaborate on personal or business projects. 

Survey Link: https://docs.google.com/forms/d/e/1FAIpQLSehSwSTIjQrLX3VhNjWKu1WQGyzXqhFnKx0wxLRw8PjAae97g/viewform?usp=dialog


r/makerspace • • 2d ago

Any luck with corporate tool/equipment donations or sponsorships for your Makerspace?

5 Upvotes

I help run a small Makerspace, and we definitely struggle with affording new tools and equipment. Does anyone have any practical experience with getting corporate sponsors to help out? Are companies like X-tools or Dewalt or Anycubic interested in donating or lending tools to smaller Makerspaces? Or other forms of sponsorship? Or is this just a pipe dream? I'd love any practical, experienced advice. We are not a non-profit (well, we are accidentally, but not purposefully and legally.)


r/makerspace • • 2d ago

Aqara x Skadis Camera Mount Made a SKÅDIS mount for the Agara E1 & G3

Thumbnail gallery
3 Upvotes

r/makerspace • • 2d ago

Struggling to choose a personal industrial design project

Thumbnail reddit.com
1 Upvotes

r/makerspace • • 3d ago Bravo

Built a solution to my hardware organization nightmare

Thumbnail gallery
8 Upvotes

I've had my workshop for about 10 years an the bane of my existence has always been hardware organization. I built a tool, shared with a few hobbyist friends, and we really enjoy it so I wanted to share it with more people. It's free to use.

Attached are a few pictures showing how much better my organization has become since using it and how much easier it is to find. The site makes any* size label and responds to different ratios. It also allows users to upload custom hardware profiles, customize their color schemes, and mass import from a spreadsheet.

Label Generator


r/makerspace • • 4d ago

[Survey] How do you store and track your filament? (3 min, anonymous, high school project)

2 Upvotes

Hi r/makerspace, I'm a high school student working on an engineering design project about filament storage in school and shared 3D printing labs. I'm trying to find out how people actually store spools, keep track of how much is left, and deal with damp filament or spools running out mid-print.

The survey takes about 3 minutes. It's anonymous and doesn't collect names or emails.

https://docs.google.com/forms/d/e/1FAIpQLSdJZTrjx32Be2-TQF-_QgGWRD-dJQp0zI_vzzDVcstWH2Thqg/viewform?usp=dialog

If you have a story about a print ruined by a run-out or wet filament, I'd love to hear it in the last question. Thanks, and I'm happy to share the results here once I've put them together.


r/makerspace • • 4d ago

Engineering a budget-friendly, 6-DOF CAD mouse (NaviGo). Dropping the DIY files soon! 🛠️

3 Upvotes

Just wanted to share a sneak peek of a project I've been working on: a fully functional, DIY alternative to the SpaceMouse, built for under $15.

​Current Specs:

​Powered by Raspberry Pi Pico + ADXL335

​Custom Python Add-in for Fusion 360 (silky smooth Pan, Orbit, Zoom, Roll)

​Hardware theme switcher with on-board memory (Cyberpunk, Matrix, and Fire themes)

​Smart directional LEDs that light up based on where you push/pull.

​I'm currently writing the assembly guide and finalizing the STLs/code for release.

​If you're interested in building one, let me know below and I'll send you a link as soon as everything is published! Any feedback on the design is also highly appreciated!

Here is yt short for it

https://youtube.com/shorts/xIgNhH2CMgI?feature=share


r/makerspace • • 5d ago

I wrote a free 8-lesson Arduino course for ages 11-14 that runs in Tinkercad, so kids don't need kits

16 Upvotes

When my local library's Arduino program shut down for lack of instructors and materials, a few teammates from my robotics team and I rebuilt it from scratch. It's now taught at five libraries and has reached 1,000+ kids, and a Canadian nonprofit, Digital Moment, adopted the French edition.

What's in it:

- 8 lessons, about 90 minutes each: blinking LED, series vs. parallel, buttons and pull-down resistors, potentiometers and analogRead, servos and map(), switch statements and loops (a 4-mode windshield wiper), and two open-ended capstones

- Every lesson works with real parts OR entirely in the Tinkercad simulator

- Code examples, wiring diagrams, teacher notes, timing, common wiring mistakes, and exit tickets

- Free and MIT-licensed

I'm a high school senior, so I'd really appreciate feedback from people who know this better than I do, especially on the explanations in Lesson 3 (pull-down resistors) and Lesson 7 (millis() vs. delay()). If you teach or mentor and end up using any of it, I'd love to hear how it went.


r/makerspace • • 5d ago

40K to start from scratch, what would *you* buy?

Thumbnail reddit.com
1 Upvotes

r/makerspace • • 6d ago

HELP!!!! HS teacher helping construct set pieces and the play opens next weekend

Thumbnail reddit.com
2 Upvotes

r/makerspace • • 7d ago

do makerspace type jobs exist after college?

Thumbnail reddit.com
2 Upvotes

r/makerspace • • 9d ago

Ideas :p

Post image
2 Upvotes

Making a specialized cyber deck out of an old record player casing. Initially planned to use this laptop motherboard as the brains and take it out of the casing and put it at the bottom, but the laptop ended up standing perfectly on the standoff, which already were installed. decided to go this route instead, but need a mechanism to hold the laptop bottom down so that when I close the case, it doesn’t move. But also need it reversible to where I can still open it and work on the internals if need be. Any ideas :p


r/makerspace • • 10d ago

Feedback requested: second prototype of my 3D-printed, battery-powered espresso machine

Thumbnail gallery
4 Upvotes

r/makerspace • • 12d ago

We made a virtual breadboard where kids practise circuits before touching the real kit

5 Upvotes

I'm Stefan, co-founder of Early Alpha Engineering. We built an online circuits workshop where kids learn electronics step by step, in the browser, on a computer or tablet.

  • The child drags real parts onto a breadboard (LEDs, resistors, buttons, transistors, sensors, motors) and presses "Simulate". If the circuit doesn't work, it says what's missing. An LED without a resistor burns, and stays burnt.
  • 22 guided lessons, then 137 broken circuits to repair (a wire one row off, a part turned the wrong way, a burnt LED), and 33 projects.
  • 7 languages.
  • You can try it without an account; full access is about 10 € per child per month (disclosure: it's ours).

Link in the first comment. Question for people who run kids' sessions in a makerspace: would a practice round like this before the real kit help you, or would you rather they make mistakes on the real breadboard?


r/makerspace • • 12d ago

Heat Bending Reeded Sheet Plastic Lampshades

Thumbnail reddit.com
1 Upvotes

r/makerspace • • 13d ago

Omnichord like, fully self contained electric instrument of some sort

Post image
1 Upvotes

r/makerspace • • 14d ago

MakerQual is free & looking for pilot testers

Thumbnail gallery
2 Upvotes

I posted 2 weeks ago here that MakerQual was demo ready and now after incorporating some feedback from DMs it's feature-complete. Go ahead and use it, it's ready.

MakerQual.com is a free tool to help Makerspace operators answer a question that's so simple yet so difficult for so many... who is currently qualified to do what in your makerspace?

If you're wondering who cares, it tends to be when Timmy walks up to you and asks permission to use your more dangerous or expensive gear.

MakerQual is both an app and a process, on one hand it's paper-based that makes members' lives easier- on the other hand it's digital and gives you personally a single pane of glass into insights you need to help keep your people safe.

The thing that really slick is the flow for getting your physical paperwork uploaded into the app conveniently. You can use your phone camera to get data into the app or even easier drop everything in a batch scanner - the documents automatically get ingested into the app without manual data entry on your part (using QR codes and optical character recognition). You get the best of both worlds (paper and an app) without the downsides of either.

It's completely free, downloadable as a Progressive Web App, works 100% without an internet connection, and is plastered with my contact info if you have any questions.

I've worked in an enterprise setting for a long time and stepped on enough landmines to know the right middle ground for features when deciding to stick with old faithful vs chasing all the shiny new toys.

What I'm looking for is a Makerspace to pilot the app. I can't offer much, but if you do pilot MakerQual and give me your earnest feedback we can talk about getting you on the testimonials section on the landing page if that's something that interests you - a little free advertising for your Makerspace is the least I could do.

There's no barrier to entry for my request, when I say pilot I simply mean go to MakerQual.com, use it, and let me know if you run into any sticking points. It's out there and it's free so if you run a Makerspace or just want to test it out on your phone or tablet or computer at home be my guest, I'll take any and all feedback. You can find me on Reddit or my contact info on the site.

The easiest way to get started would be to use the dummy data generator feature - in the app in the setup tab, generate a faux backup file to import into the app and you can shake it down with as many members and forms and years of data as you specify - the defaults are fine to start with. This is different from working with the small sample dataset of 8 fictional members you'll find from the landing page used throughout the guided tour, to be clear.

If you're wondering what my angle is, I have a day job I enjoy, it's not about money. I'm here to help is all, I like being a part of the broader Maker community, and this is one way I can help out, by helping Makerspaces of all sizes have access to a well-designed free tool. You help people make cool stuff, safely, and I'm a happy guy. That's all there is to it. Hope it helps, thanks for reading to the end


r/makerspace • • 18d ago

Matplotlib Real time Plot Animation Tutorial using FuncAnimation() and Python for Beginners

Thumbnail youtube.com
1 Upvotes

r/makerspace • • 18d ago

A LEGO drivetrain test bench: 16 pistons, six ratios and one motor

Thumbnail youtube.com
1 Upvotes

I built and filmed a motor-driven LEGO V16 model with a six-speed manual gearbox. The exposed mechanism makes it possible to follow the drive path and compare the piston speed as the ratio changes.

The crank speeds measured from the footage are 68 / 115 / 206 / 339 / 545 / 869 RPM. The full film covers assembly and the six-gear comparison, which starts at 8:27.

This is my video on Brick Trials. I assembled the model but did not originate its design. For a hands-on gearing demonstration, what would you add to make the speed-versus-torque tradeoff easier to see?


r/makerspace • • 19d ago

Makerspace trying to choose new embroidery machine

8 Upvotes

Hello all! I'm a lead at a makerspace who handles the textile area. We currently have an elna eXpressive 970 seven needle machine that has been broken most of my tenure, despite having multiple fixes happen.

We have determined the issue is a few things:

  • massive growth within textiles over 3 years, it used to support 40-60 members, it now regularly sees 200 individuals in a month but the space has almost 800 in total.
  • Poor prior training leading to bad habits and our ongoing attempt to fix the machine that was broken years ago
  • This machine does not support the needs of the space

Due to this, we are looking to upgrade our machine and are looking at a maximum budget of $12,500 but would prefer having it lower.

The number of needles isn't as important, we'd be happy with anything over 5 but we are mostly looking for durability and forgiveness when someone who isn't trained gets into it. Alternatively, a system built into the machine that allows us to prevent those without authorization from gaining access - currently this does not exist.

We do have the newest version of Hatch and it would be beneficial if that was usable but not a deal breaker for us, we certainly aren't choosing a software over a machine that would work for our space.

We are ideally looking for input from other makerspaces or libraries with similar foot traffic that can speak to the pros and cons of certain machines.