r/mechanic • • Jul 16 '24

Announcement New Feature In r/mechanic

21 Upvotes

Hello everyone,

Just a quick post here to inform you all of a new feature that has been added to sub that may help cut down on unwanted comments in your own posts.

If you are the OP(original poster/creator of a post) and decide you want your entire post locked, you can simply comment on your post with just "!lock" (no quotes), and AutoMod will automatically lock your post. This will prevent any further comments on it including ones from yourself. Just a small warning, you cannot undo this yourself, you will need to send in a ModMail to request the post to be unlocked again.

Just a small update to the sub but, may be beneficial to some if you start getting flooded with comments.

Thanks,

Mods


r/mechanic • • 4h ago

Rant No more favors!

20 Upvotes

I’m done doing favors from anyone besides my parents. Only working on paying jobs or my Own vehicles.

Freaking spark plugs for the neighbor turns into a black hole and I’m Losing money for offering to do a favor.


r/mechanic • • 8m ago

Question ?

1 Upvotes

Anyone know what this noise is


r/mechanic • • 20m ago

Question Smoke coming from exhaust

Thumbnail
gallery
1 Upvotes

Is this normal the smoke coming from exhaust? When am sat at lights notice more but this is smoke when driving? Is this bad? Mostly happends at night


r/mechanic • • 27m ago

Question Not sure what to do

1 Upvotes

Hey! I have a volvo c30 1.8F with the faultcode 2008 (intake manifold runner control circuit open bank 1a).

And I have no idea where to start looking since I don't know much about fixing cars


r/mechanic • • 1h ago

Question Seller told me Inout shaft bearing after buying

1 Upvotes

02 ford f150 5.4 triton 4r70w
What’s this sound like to yall😭


r/mechanic • • 1h ago

Question Hyundai Kona 2nd Gen 2024 EV, helicopter type wobbling sound

0 Upvotes

Hi,

So I have just got an electric car and seems to hear a helicopter/warbling sound.

I asked this is a Kona group, but only had videos at slow speeds.

Does it sound normal? It doesn't to me, but this is our first electric car.

I've seen similar posts on here about it being cupping or bearings. I only really hear it when I have regeneration on or if I accelerate instead of coasting. That makes me think more likely bearings?

When you role windows down you can hear it too.

It's still under warranty so can take it to them, but wonder if I'm just hearing stuff that's not really there...

Thanks in advance.


r/mechanic • • 1h ago

Question 2016 Nissan Rogue SV 2.5L - Recurring P0101 Code, Engine Shaking, Despite Replacing MAF

1 Upvotes

This car has been giving me issues since late August.

It's a 2016 Nissan Rogue SV with almost 97k on it. The CEL, with specifically code P0101 has been recurring since late August.

Car had been driving "sluggish" for months. Changed the engine air filter & cleared code, car still ran the same (sluggish). Changed battery in early Sept. because it died. I originally suspected trans slipping, til the code reappeared, and mechanic said trans shifting points look good. But the code did not reappear until mid-late October. We changed the MAF sensor with an aftermarket from Walmart after cleaning my original MAF that came with my car. It worked for 2 days before driving sluggish again. In the same week, aftermarket MAF was changed to OEM Hitachi from a Nissan dealership, and the car was still sluggish. IAVL had been performed on this car about 3 times throughout all of this.

I believe this all took place the week of Oct. 18th-24th because I remember it being around my birthday. We brought it to the mechanic because CEL kept returning. Mechanic performed IAVL. Immediate day after, CEL came back on within a 30 minute drive. Returned to mechanic next morning, ANOTHER IAVL performed and told that aftermarket MAF specs were out of whack. (These IAVL's did fix all of my complaints with my car each time)

Went on Nov. 5th to get an OEM Hitachi MAF sensor.It was replaced same day, ANOTHER IAVL done same day.

Car was driving perfect after OEM replacement and IAVL. Since, it has slowly gone downhill to driving sluggish again. It does drive much better than it did initially but still kinda sluggish. My mechanic hasnt figured out anything. So far, CEL returned 11/18 after starting the car when I was leaving college. I suspected a leak, but mechanic never checked for one and INSISTED my car is fine. My cousins husband suspects a leak, wiring issue or alternator failing. I don't know if it's cause I'm just paranoid now but I've also noticed some extreme engine shaking, and it shakes slightly harder when under electrical load.

The engine filter, and MAF have been replaced, throttle body has been cleaned, new battery, new trans fluid. Was not changed, just added some more.

This was my fathers daily car before it was mine, and he would commute to Manhattan almost daily. He gave it to me in 2023 at around 79k. I know the spark plugs have to be changed. The only other things my father remembers replacing is some oil sensors, got new tires from Firestone, and front hub bearings. Otherwise, everything is all my original parts or at least OEM.

Sorry for the crappy fornatting, I'm on mobile and at work.


r/mechanic • • 2h ago

Question 2010 Escape Power steering

1 Upvotes

This morning, I started my car there was no power steering.i was 2 hours from home so I drove to Walmart got a new 10A fuse and it was fine. Stopped for gas turned the car on there it was fine. I stopped at another Walmart to grab a journal so I can log the services and repairs my car receives but when I started my car to leave there was no power steering. I put in another new 10A fuse that came with the kit I bought but when I turned the car on after replacing I still didn’t have power steering. At this point I was only 15 minutes from home so I put in a 30A fuse so I could finish the drive and it worked. (I know you’re not supposed to do that because it could start a fire but tow trucks are expensive)

(Update) I got home, and decided to take out the 30A and try again with the 10A and I have power steering again. Not sure how long it’ll last though.

Any idea what could be happening?
This is what the fuse covers: Four wheel drive, Electric power assist steering (EPAS), Park aid module, Active park assist module
I appreciate any advice you can give me so much


r/mechanic • • 2h ago

Question Can this be patched?

Post image
0 Upvotes

Guy at the tire shop says this cannot be patched because the nail is "right on the edge" is he bullshitting me or can this be patched?


r/mechanic • • 2h ago

Question Car has been in slight accident

Post image
0 Upvotes

Anyone’s advice / opinions be greatly appreciated

bent rear axle or broken wishbone and cv joint and hub.

Also drove back as did not realise the wheel was bent

It seemed to drive fine.

Thanks


r/mechanic • • 3h ago

Question Help me diagnose

1 Upvotes

Need some help diagnosing a starting problem with my 2012 Silverado 5.3 L. Battery health is roughly 71% with 39% charge. So battery isn’t ruled out but it doesn’t seem like a battery issue to me. Any other ideas?


r/mechanic • • 7h ago

Question A Bit of Dirt? Honda Fit 2007 1.5

Post image
2 Upvotes

Hello!
So, long story short, I had to maneuver through a pile of sand. I checked the air filter and the area around and this is what I found. Sorry because I couldn’t find a way for the camera to focus.
I know it should have not amount of dirt, or sand for that matter, but I don’t know how much should I worry (:


r/mechanic • • 3h ago

Question Sound when reversing

0 Upvotes

2017 Subaru forester 4 cylinder, I hear this noise when I reverse but only for a few second as in the video. I drove home from the movies last night but didn’t hear it then. Any ideas to what it could be and how urgent? Any suggestions for fixing it would also be very appreciated. Thank you

EDIT: this is an automatic vehicle


r/mechanic • • 4h ago

Question Snapped off while removing wipers. Fix?

Thumbnail
gallery
1 Upvotes

My transmission linkage for my wipers was seized from rust and salt so I had to take it apart. Dremeled the rust off and applied new grease to the linkage and now the wipers work fine but I have one wiper fluid hose that ripped off.

Best way to fix this rubber without replacing the whole thing?

Thanks

2004 Pontiac Grand Prix 3.8 L V6 LS2


r/mechanic • • 4h ago

Question 2013 Audi A7 3.0T — White smoke (smells like burned oil) when warm + misfiring/jerking after engine swap & sitting ~2 years.

0 Upvotes

looking for some direction on my 2013 Audi A7 3.0T (Supercharged) because I’m getting conflicting answers from my mechanic and an exhaust shop, and I’m not sure what to tackle next.

Background & Timeline:
The car sat for nearly 2 years before I had a replacement engine put in.

It still had a full tank of ~2-year-old gas in it. I drove it down toward E, added Lucas fuel treatment/stabilizer, and refilled with fresh 91+ premium gas.

I recently had the center resonator deleted and replaced with a straight pipe connected to the stock mufflers.

Current Symptoms:

  1. White Smoke When Warm (Smells Like Burned Oil): On a cold start, there is no smoke for the first few minutes. Once the engine warms up to operating temperature, white/gray smoke starts coming from behind the engine (driver's side firewall/cat area) AND out of the exhaust tips (also leaving dark/sooty condensation droplets behind the tailpipes).
  2. Jerking / Hesitation / Misfires: When pulling out onto the road or randomly while driving/accelerating, the car stutters, jerks, or feels like it’s misfiring.

I haven't had a post-exhaust-shop tune-up or fresh code scan yet.

My Mechanic: Told me there is oil inside my catalytic converter and to "just drive the smoke out" (and drive the old gas all the way down).

Exhaust Shop: Checked it out and told me the smoke is coming from my engine, not the exhaust system.

Work Already Done on the Replacement Engine:
Engine mounts replacement
Valve cover gasket replacements
PCV / oil separator replacement
Rear main seal replacement
Engine oil filter housing replacement
Intake manifold / supercharger gasket replacement
Spark plug replacement
Thermostat, radiator, coolant tube, and heater pump replacement
Serpentine belt & supercharger belt replacement
Transmission full service (filter & gasket)

My Questions:

  1. Given that the valve cover gaskets, PCV, rear main seal, and spark plugs were already replaced, what could still be causing burned-oil smoke behind the engine and out the tailpipes ONLY once the car warms up? (Could a new valve cover gasket be pinched at the back corner, residual oil burning off the cat, or something internal on the swapped engine like valve stem seals/rings?)
  2. Could the random jerking/misfiring under load be weak ignition coils (since only plugs were replaced) or leftover contamination from the 2-year-old gas/injectors?
  3. Should I stop driving it immediately rather than trying to "drive the smoke out"?

Appreciate any insight from folks who know the A7 3.0T platform!


r/mechanic • • 7h ago

Question What is this rattle? - 2008 Honda FR-V 1.8 Petrol

2 Upvotes

Hi everyone!

My car is making this rattle noise on cold starts only. After a drive and turning the car off and on to see if the noise comes back, the noise isn’t there.

Not sure if it’s a sticky starter motor pinion? Any help would be greatly appreciated.

Thank you very much!


r/mechanic • • 4h ago

Question Starter knocks before starting

1 Upvotes

Hello reddit !

My starter recently died on my truck and I changed it (for a re-machined one) my self but now when I turn the key it knocks 2-3 times before actually starting to turn, I have checked and all 3 wires are connected.

So I am wondering, can it be a starter issue or electrics problem ?

2009 Ford Ranger SOHC 4.0L V6 Manual


r/mechanic • • 4h ago

Question Is it safe to drive my 2015 Honda Civic about 220 miles with a cracked air intake boot?

1 Upvotes

I have a 2015 Honda Civic with around 140k miles. Recently, my “Check Emission System” warning came on, and a mechanic told me that my air intake boot is cracked, which is likely causing the warning.
The car seems to be driving normally. I haven’t noticed any major changes in performance, but the ECO indicator on my dashboard that normally changes from blue to green hasn’t been turning green at all since the warning appeared.
I need to drive about 200 miles from Santa Barbara to San Diego on Tuesday, where I’m planning to take it to a mechanic to get repaired on Wednesday.
My questions are:
Is it generally safe to drive that distance with a cracked air intake boot?
Could driving on the highway for that long cause additional engine damage?
The emission warning stays on constantly and isn’t flashing. Just trying to figure out whether I can reasonably make the trip before getting it fixed.


r/mechanic • • 5h ago

Question How to remove striped and broken lug nut? 2013 Lexus RX350

Post image
1 Upvotes

Had a tire go flat yesterday while in my driveway. All 5 lug nuts were stuck too tight so I had to get my impact and extractor. It worked for the first four, but the last one strip and the top broke off. Is there any way to remove this?


r/mechanic • • 5h ago

Question Strange Noise on Cold Start

1 Upvotes

Hi everyone! For the past two days, I've been hearing a strange noise when starting the car from cold in the morning, as shown in the video. What do you think it could be?
If I turn the engine off and start it again, the noise doesn't occur anymore. It's as if it only appears after the car has been sitting for several hours and only when the outside temperature is low.
Could it be the starter motor or the auxiliary belt?
I connected an OBD scanner in the video simply to rule out a battery deterioration issue. However, the battery is less than two years old, so it should still be in good condition.


r/mechanic • • 6h ago

General Car has almost no vibrations on idle while running on gas but on LPG is way worse

0 Upvotes

I have a 2010 alfa romeo mito t-jet version that has an almost non noticeble vibration only on idle which it can be ignored. Not even a month ago, I installed LPG on it since gas prices are moving up and down like playing basketball since I use it quite often for small roadtrips. Anyways, the vibration when using gas is almost non existant but when I do a cold start the RPMs are moving sometimes up and down on the dash (like 100 rpms minus or plus) and sometimes it's perfect without even moving at all.

When I use LPG the car on idle is getting worse and has a slight backfire randomly and random levels of vibrations. The more I stay on idle the more frequent backfire I get. I've been to the shop that installed it 4 times now and they insist that the fault is happening because of the spark plugs or the coilpacks even though they checked them and swapped them. So, I stopped visiting that shop since it has no difference every time they say it's done.

So, I went to another LPG specialist and he took the car for a drive with the diagnostic plugged in and I was with him holding his laptop. He did some corrections and basically made the car run more lean than previously which might have a very small improvement but still the shaking persists. I have used a cheap obd sensor to check the short fuel trim and sometimes the car is going up to +-15% while idle for about 5-10 minutes which I dont think is normal.

When accelerating I haven't noticed any problems or something unusual happening. The car is boosting properly without hesitation. Right now, I am trying to not spent money on parts that I wont need and also not hurt my motor.

The next step I think is to clean the throttle body or possibly use a MAF cleaner for the MAF sensor and see where that will get me.Could it be something the shop that installed it did it poorly or something that is loose? Any thoughts?


r/mechanic • • 6h ago

Question Broken tire stem valve

Post image
1 Upvotes

2015 Toyota Sienna LE. My tire valve broke as shows in the photo. For my sienna is a tire shop able to replace the valve stem without having to replace the sensor or is it supposed to be permanently attached to the sensor? If they are able to replace just the valve stem, is that something they would do or would they require me to upgrade the sensor anyways? I’m planning to go the tire shop where I got my tires before. No chance they would have replaced those when they replaced my tires since it has sensors, right? Trying to see if it would be under my tire warranty


r/mechanic • • 7h ago

Question E87 116d N47 No Start and smoke out of intake?

1 Upvotes

Hi, I recently bought a non running 116d and was told it was due to fueling problems, that fuel wasn't coming out of the sender. However using a scanner I could verify both the low pressure and high pressure sides build up the correct pressure when cranking (4 bar and \~400 bar).

If I crank for a little bit white smoke (that I think smells like diesel) starts coming out of the intake hose. I've checked for a stuck egr valve, while it does get abit sticky when it's open, I've put it closed and the problem is the same.

The car cranks fine (maybe splutters slightly), unsure what the problem could be. I was told the timing chain and hpfp was checked and that there's no issue with it, but I'm not too sure. The only codes that show up are related to a brake sensor, and one faulty glow plug.