r/metalworking • • 18h ago

Finished the spitfire

107 Upvotes

r/metalworking • • 16h ago

How much would you pay for this. Materials probably cost $90

Post image
79 Upvotes

r/metalworking • • 14h ago

Coffee Bar

Thumbnail
gallery
16 Upvotes

Made this coffee bar for my fiancé as a Christmas present, last year. Happy with the outcome, just wish I had put plastic but caps on all the open ends. Made from aluminum tubing, glass was sourced from an old entertainment center, wood from Lowes. I think all in I was 120 bucks. Large opening is to accommodate a mini fridge. No inspiration on the design, just from the heart. Rate it 1-10, or don’t, Idc🤷🏼‍♂️


r/metalworking • • 14h ago

I know, this is pretty damn good welding 😅….tractor supply Hobart 🫡

Thumbnail
gallery
17 Upvotes

r/metalworking • • 17h ago

DIY belt grinder

18 Upvotes

My first diy Maschine for metal work. I used a 4kw motor from an industrial sized dust collector. The belt is 2000x150mm because I was never satisfied with the small size of belt grinders. The grinder tilts sideways as well. It was heavily inspired by the Youtuber Jer Schmidt. It took a while to figure out proper tracking of the belt, the trick was adding two extra springs in addition to the 20kg gas spring to increase the tension.


r/metalworking • • 3h ago

Best way to start

Thumbnail reddit.com
1 Upvotes

r/metalworking • • 14h ago

Help identify unmarked vintage lathe

Thumbnail
gallery
6 Upvotes

Picked this bad boy up at auction for next to nothing on only a single terrible photo.

12" swing over bed, 30 inches between chuck and tailstock.

Tool holder is an Armstrong, motor is an old Leland. No nameplates anywhere else. Plain bearings on every shaft, some with oil pots, some with grease nipples. Everything moves as it should, motor fires right up. But I need to know what make this thing is so I can order some more change gears and figure out the combinations for common threads.

Best guess is old craftsman/atlas/Logan but I haven't found one wit the same headstock anywhere searching.

Any ideas?


r/metalworking • • 16h ago

New guy, looking for advices

Thumbnail
gallery
7 Upvotes

Hello!

Some background you can skip:

I've been working in the restaurant industrie until 2018, and I've been looking for a way out for a while now, and it's been hard.

I've always been interested in manual work, tho I can't say I'm a "Handy Guy" when it comes to building/fixing things, as I've never had a chance to be that person.

I am, however, very interested in metal working.

I do HEMA and buhurt, and I knew that my perfect side job would be to build armors, Swords, axes and the like once I got enough knowledge.

I've been recently accepted in an aeronautic metalworker course (not sure how to call it in english), and I've been learning a lot on the spot.

I may not have a gift, but I learn fast.

Now, we've been working on a training piece where we basically have to Hammer an alluminum/manganese disc into a "bowl" following a patron.

Getting the deep shape isn't the problem, but even after heating the piece, everyone kept breaking it on the sides, and we can't quite get the angle we want on the edge.

What could we be doing wrong?


r/metalworking • • 1d ago

Chain Lamp

Post image
63 Upvotes

r/metalworking • • 1d ago

Custom stainless charcol starter

Thumbnail
gallery
13 Upvotes

A buddy asked if I would make a charcol starter that wasn't a flimsy pos & hit the following criteria: has a propane torch window, a riser for the window to hit a certain height, and an ash pan/heat shield incase adult sodas make him forget step 2.

Took about 2-1/2 hours without a plan or drawing, id say this will do.

Fun project using a hydraulic sheer and stationary spot welder; its kinda like adult legos!


r/metalworking • • 11h ago

How much would u pay for this. Material cost is much but took lots of time and effort

Post image
0 Upvotes

r/metalworking • • 2d ago Bravo

I built a Cam Hammer

472 Upvotes

r/metalworking • • 1d ago

Repairing a letter opener - Any help appreciated!

Post image
12 Upvotes

Hi everyone,

I have a letter opener belonging to my father in law that got damaged at the tip, and I was hoping to try and repair it as i think it will be fun/satisfying to learn. It's a really small repair, so hoping it's achievable for a total beginner.

Unfortunately I have never done anything like this before so I'm not very confident in where to start, any advice would be most welcome.

My first step was trying to establish the metal, which I think is nickel plated steel based on the colour, light weight and fact its magnetic?

Based on this I was hoping to slowly sand the end back to a smoother tip and then polish it up as best I can, and AI seems to think this will work lol.

I am assuming the plating on the tip has been broken by the small gouges so I am mindful that while I am sanding and polishing the repair I need to avoid damaging any more of the plating higher up?

If anyone is able to give me some pointers, help confirm the metal, or relevant advice I would be very grateful.

Thanks for reading!


r/metalworking • • 23h ago

How do small fabrication shops handle welding engineering issues?

0 Upvotes

Hey everyone!

I'm a welding engineer, and I'm curious how smaller welding and fabrication shops deal with technical issues that require engineering expertise.

Do you usually handle everything in-house, or do you ever bring in outside help for things like WPS/PQRs, welding procedures, material selection or quality documentation?

Also, would remote support (document reviews, technical advice, online meetings) be useful, or do you think this kind of work really needs someone on-site?

Just interested in hearing how things work in the real world, especially from shop owners and people working in fabrication.

Thanks!


r/metalworking • • 19h ago

Can someone tell me how to find the right metal to manufacture the right kind of hand tool ? And how to test these tools

0 Upvotes

I am a trader of hand tools, after I die, I want to leave humanity with a brand of tools that is genuinely value for money, but I realized I don’t know jackshit about metals, all the pliers look the same, so does all the bits .. you never know which are good quality. So I think only some metal engineer can give me some insight. Like what kinda instruments should I use, what testing equipments should I buy ? How should I think about it


r/metalworking • • 1d ago

Can you recommend me a wire?

Post image
6 Upvotes

I need to build up some tabs with weld, and then file them into shape.

This item goes through a piece of tempered steel and is pounded into shape on the other side. This holds the piece tightly in place. The file tells me it's made of some kind of carbon steel. You can see how it's put in the picture

I need a material for my welder that once laid can be heated and forged.

I don't know how many characters is 400.


r/metalworking • • 1d ago

Question: Ideas on how to fix this?

Post image
0 Upvotes

Got these as a “gift” for a friend but they are branded with China on the back. Any ideas on how to get rid of it? These are metal, I was thinking maybe a little metal engraving on top of it? I’m not familiar with this kind of stuff. Any advice would be appreciated. The wording isn’t raised, or a sticker, it looks to be etched into it. Is there a small tool I can buy to engrave over it or something similar?

I originally posted this on r/DIY but no one answered me. I also haven’t been able to find anything similar online.


r/metalworking • • 1d ago

looking for some tips

0 Upvotes

hello everyone, I'm looking for some tips on a project I'm going to do. now for some context I'm 14 and really want to do metal work with my pop and I've done some metal work but not tons, but the main thing I'm here for is some tips with the blue print, mostly on how do I get exact angles down with out a protractor to help me calculate the angles and what other tips could u guys and gals give me to help me out in future.

I would also like to ask if anyone has any ideas on what type of metal I should use, im set a steel and want to use some 304 to 306 grade stainless steel but im not sure if that is what I need to use, im making a bolt action pen and ive got the blueprint nearly done but idk if the metal is exactly what I should be using for this project, if u have any tips for me it would be much appreciated, and if there is any questions that could help u out on helping me im happy to answer nearly any of them.


r/metalworking • • 2d ago

Whiskey display cage I made

Thumbnail
gallery
15 Upvotes

r/metalworking • • 1d ago

Looking for ideas and advice on building a creative, minimalist metal vanity frame

1 Upvotes

planning to build a custom bathroom vanity using a fabricated metal frame as its main structure.

The platform will be approximately 5 feet long × 2.5 feet wide. It needs to support a heavy countertop/platform (possibly concrete or granite) and a washbasin. The frame must be strong, rigid, stable and resistant to moisture.

I already have some metal angle-iron pieces (approximately 5 ft, 4 ft and 8 ft long), and I'm willing to purchase additional material if needed.

More importantly, I don't want it to look like a basic rectangular metal frame. I'd love to create something creative, minimalist and architectural, with interesting shapes, angles or asymmetrical elements while maintaining structural strength.

Can anyone suggest creative frame designs, reference projects or construction ideas? Would angle iron be suitable, or would square tubing or another type of metal be a better choice?

I'd really appreciate both design inspiration and practical fabrication advice.


r/metalworking • • 2d ago

I built a Cam Hammer

50 Upvotes

Please follow and check out my other videos of it in action! I have a man vs. machine test, I forge a knife with it and mainly show the basic parts and the way it functions. It's pretty self- explanatory. I'm planning on building a 2.0 version and posting it as I go. Come along for the journey, I think it'll be an adventure. If you have any suggestions, please send them my way! I hope you enjoyed watching. Thanks for the support.


r/metalworking • • 2d ago

Dragons of the Scrap Realm

Thumbnail
gallery
22 Upvotes

Bought an Arcaptain welder a while back and I've tried it with stick and fluxcore until I finally got my mix gas tank and flow regulator to be able to try out real mig. Still getting used to the settings, but i figured an artsy small project would let me get a feel for smaller scale stuff. Raided the scrap hoard and figured chain would be a good flexible/ adjustable base (motorcycle, bicycle & high velocity), hit the thrift store for spoons for scales. Scrap sheet metal for wings gave me a chance to try out the pneumatic shaper/ stretcher that i made out of an air hammer clamped into a heavy frame with an anvil base for the chamfered hammer bit to work against. It's got a foot pedal so I can move the metal with both hands. I was pleasantly surprised how quick and easy it was to do compound curves with a smooth finish. I figure if I want a more textured finish I can modify a die to give a pebbles finish after its shaped. All in all a fun project and my daughters love to play with them (left the tails flexible)


r/metalworking • • 3d ago Regret

dead bird knight

Thumbnail
gallery
510 Upvotes

Stainless steel utensil bird
9” x 9”

•Belly full of bismuth

•lil brazed mushroom caps from dimes/nickels/wire rope stems

•chain mail helm and small sword forged from a duplex nail (it can cut things, rather poorly)

•the legs were built up using 1/16”, 3/32” + 5/32” bare welding rods

•about 15 knives, 12 forks and 6 spoons.

•some random bits of copper, or utensil ends thrown in there as well to build a birds face


r/metalworking • • 2d ago

Mini Mule Buck Build

64 Upvotes