r/mildlyinfuriating • • 17h ago

Waffle house isnt made of waffles after testing every fridge in the showroom to make sure it was magnetic, new fridge is not magnetic

Post image

Our refrigerator recently died, so we had to go shopping for a new one. One of the things I hated about the old one is that the stainless steel wasn't magnetic, so I bought some steel plates to attach to the fridge to put up photos and things.

When we went to the showroom, one of the things we did (along with looking at every type of ice these things produce) was get a magnet and stick it to everything. We picked out a fridge, installed it and immediately hated it and it already needed service. So we went back to the store to exchange it.

Picked out an upgrade, and paid extra for the black finish. I didn't think to do a magnet test as a) I was already very tired of looking at fridges, b) I'd already magneted this same model (but in stainless), and c) assumed that the black finish meant that either there was more iron content in the steel and it was just a thin epoxy coat or something.

Yeah, well, you know what they say about assumptions...

Finally get this one installed, get it loaded again with our food, wonder what the hell I'm going to do with four types of ice, when my husband comes in and starts to put magnets on it. And they don't stick.

So now I have to put steel plates on our new fridge, hiding the pretty finish we paid extra for (which would have been covered with holiday cards or something anyway, but whatever).

At least the rest of the fridge is nice.

3.7k Upvotes

357 comments sorted by

3.7k

u/Doormatty 17h ago

Picked out an upgrade, and paid extra for the black finish. I didn't think to do a magnet test

So, you went 99% of the way, but gave up on the last 1%?

2.4k

u/faelanae 17h ago • Bravo Regret

like my sex life

31

u/Remarkable_Image7133 17h ago

Just an all around disappointment, huh? 

52

u/faelanae 17h ago

all-around? is that what 99% is? Gosh. No wonder my perfectionism streak was on overtime my whole life. It was right all along.

→ More replies (5)

439

u/SoldatShC 16h ago

Opposite problem here. Planning for 99%, done after 2%

133

u/Pope_Squirrely 16h ago

I always win in sex! I always come first!

17

u/hughperman 11h ago

First prize in a one man race 👏

→ More replies (1)
→ More replies (2)

40

u/fynx07 16h ago

Bro ran a 99 yard kick return just to fumble the ball right before getting to the end zone 🤣🤣

8

u/TypaLika 16h ago

Leon Lett'd

127

u/scahille91 13h ago

We bought a new fridge a few years back. Got it delivered and found magnets didn't stick. We were so upset. Found out about a year later there was a clear plastic wrap on the door to protect the stainless steel & removing it allowed magnets to stick. Your picture almost looks like there is a line of a plastic film. Double check and remove, if you can.

31

u/faelanae 12h ago

that's the black finish. probably the same kind of plastic, but more adhered

1.6k

u/DuckThatLikesBread 17h ago • Heartwarming

Idk when this sub became "shit on people for admitting they're slightly miffed" instead of "huh yea I'd be a lil miffed too". 10/10 I would be mildly infuriated knowing this was my own damn fault.

469

u/faelanae 17h ago

this sub is so weird. I'm obviously slightly peeved at myself for not asking about how the finish affects the magnetism. Would have saved $200 and not gotten the pretty finish. But it's not a catastrophe, obviously!

111

u/TurnipWorldly9437 16h ago

If you really need the magnetism, they sell magnetic foil to stick on stuff.

We've done chalkboard foil on our children's doors, and you can choose which size you need.

74

u/faelanae 16h ago

oooh! I was gonna look into something else aside from the steel plates, but haven't had time. thanks for the heads up!

→ More replies (1)

17

u/shoobe01 13h ago

We have magnetic vinyl around the house variously and I think it comes in many colors. Maybe can get black to match the rest of the fridge even...

20

u/shaker8 13h ago

oh my god, thank you!! you just solved a pondering I’ve had about a wall at work, but it’s inside of a lab, so chalk dust is a no-go. it turns out they make magnetic whiteboard adhesive rolls?????? 🤯 consider my flabbers properly gasted!

→ More replies (2)

15

u/cupcakesare____ 13h ago

You could even say it's mildly infuriating

8

u/Cogswobble 14h ago

At least you have good taste in magnets!

3

u/DeltaIndiaCharlieKil 7h ago

My subway takes is all fridges should be magnetic by law. Only if you change it and add a decorative wooden panel would it be fine for it not to be magnetic. But all metal fridges should be expected to be magnetic.

I currently have a stupid stainless steel looking fridge that I have to tape my kid’s art to. I hate it. It goes against the nature of a family fridge.

49

u/miss-ferrous 15h ago

I’m personally at least slightly infuriated by the thought of any fridge not being magnetic anyway. For what reason

14

u/faelanae 13h ago

I think there's an assumption by manufacturers that a lot of people prefer their kitchens to look like showrooms. If I didn't have a family, I probably would, too. But I also live in a fairly open house with two youths, and many walls are curved, so it's not like I can easily stick a corkboard up. Plus the kitchen/living room is where everyone hangs out, so it's really the best place for certain notes and things to be shared. One kid has her own corkboard where she keeps all of her photos.

What I got from the salesperson is that most manufacturers realized that people didn't like non-magnetic fridges, so they upped the iron content in their steel. But for whatever reason, this black finish is different than the regular stainless.

3

u/splithoofiewoofies 11h ago

So just do what my mom did and refuse to put any of the kid's art on the fridge if you want it so clutter free. leave it magnetic for those who like their kids!

→ More replies (1)

13

u/etxfisher 15h ago

I'm not sure if it's the case for this fridge but 304 stainless is often used because it is much more corrosion resistant that other stainless steels, however it isn't magnetic.

→ More replies (2)

130

u/Rekeaki 16h ago

They also assume that the poster is spiraling into the depths of despair over their situation, and they mock them for it, when the majority who post here are just what it says on the tin: mildly infuriated

People are just sharing their minor issues. Relax. Literally nobody is claiming this is a big thing

12

u/cobo10201 16h ago

It’s like people forget that the name of the sub is an oxymoron and not supposed to be a serious sub.

3

u/Expensive_Plant_9530 16h ago

Oh I would be way beyond mildly infuriated. I’d be outright pissed. At myself.

→ More replies (2)

40

u/Aromatic_Shoulder146 8h ago

honestly imo fridges being magnetic should be an industry standard.

4

u/faelanae 6h ago

my understanding is that most manufacturers realized that and increased the iron content in the steel in recent years, because people complained. Now people complain that slightly darker stainless steel doesn't match bright steel that they used to be made out of.

80

u/Neesatay 15h ago

I framed a big piece of metal and we put all of our magnet stuff on that instead of the fridge...

10

u/faelanae 13h ago

alas, I don't have a wall where it would go

9

u/Veni-Vidi-ASCII 13h ago

Maybe get a big magnetic sticker from Amazon and stick it to the fridge door itself? 

3

u/Electrical_Chip_337 15h ago

This was going to be my suggestion as well. My friend has done this for all her travel magnets and it looks cool. Way better solution than what OP has done

196

u/socialcommentary2000 16h ago

Stainless Steel is not inherently magnetic. In fact, common alloys like 304 and 316 have too much nickel and chromium to allow for magnetism.

This is one of the downsides of everyone moving to fancy bare brushed steel exterior paneling. The fridges of old all used cold rolled standard steel that had been enameled.

It happens. It's more common in the modern era than you think.

12

u/faelanae 16h ago

I really didn't want brushed steel, which is why I went for the black finish (and it was $2k less than the pretty Kitchenaids or GE Cafe series models).

2

u/temporary92803 13h ago

Black enamel or black stainless steel?

2

u/faelanae 13h ago

stainless - but the regular stainless was magnetic

→ More replies (4)

11

u/Pocky-time 15h ago

It’s really weird that the black finish would be non-magnetic, since using mild steel would be the cheap option. Maybe they went all the way cheap and it’s a plastic door.

1

u/get_to_ele 9h ago

What brand and models did you buy? And does the black stainless fridge just hold magenta WEAKLY? Or not at all.

Either the regular stainless used ferritic stainless, and black fridge uses austenitic stainless…. OR regular stainless used ferritic stainless, and black fridge uses uses ferritic also, but has a coating which puts too much distance between weak magnet and door.

Is the black one brushed and the other was not?

1

u/faelanae 6h ago

the black stainless holds no magnets whatsoever. Black (LG LRYXC2606D) is also brushed, but I guess some kind of coating combined with high-nickel steel. Tried my strongest magnets and nada.

6

u/faelanae 16h ago

at the showroom, I asked about that. Sales guy (obviously not a material scientist or anything, so YMMV) but he said that modern appliances are usually made with a slightly higher iron content so they are magnetic, but they're slightly darker so not everyone likes them.

That's kind of why I didn't think much about it, assuming that black finish meant darker steel along with whatever coating they use.

73

u/rvralph803 16h ago

Nickel is magnetic by itself, which it's interesting that when alloyed in steel it forms a different crystalline structure and electron configuration that prevents magnetic domains from aligning.

Science be weird, yo.

20

u/No_Hetero 16h ago

Alloys really are so cool. How does two metals in different quantities give rise to so many different unrelated properties?

9

u/rvralph803 15h ago

Electrons, dude. Electrons.

→ More replies (1)

9

u/BufferingJuffy 16h ago

Well, when a mommy metal and a daddy metal love each other very much...

→ More replies (1)

3

u/SHMUCKLES_ 15h ago

That only applies to austenitic ss, martensitic ss like 409 is still ferro magnetic, and duplex like 2205

7

u/Critical_Thinker_535 16h ago

Depends on the grade of stainless steel. Some stainless steels are magnetic.

5

u/KingForceHundred 16h ago

And even on it’s treatment. Our (one piece) table knives have magnetic handles but not blades (or vice versa, can’t remember).

4

u/Tomytom99 16h ago

Stainless 403 my beloved

5

u/Birds_over_people 16h ago

Yes but most fridges put a steel plate behind the exterior finish on some sections so you can place magnets.

1

u/Gazdatronik 15h ago

430 stainless is very magnetic

1

u/Any-Whole-6748 15h ago

304 is very magnetic and will develop light surface rust even from humidity due to the higher iron content...... 

316 in not magnetic.......

1

u/TJNel 14h ago

I was really shocked when my fridge wasn't magnetic. Oh well at least it's cleaner looking.

1

u/TechnicianAware5917 5h ago

Most Austenitic stainless steels are non magnetic, however Martensitic and ferritic stainless steels are magnetic. Duplex stainless steel is a mix of Austenitic and ferritic steel which will be magnetic if the proportion of ferritic steel is high enough.

→ More replies (4)

54

u/thylocene 6h ago

It’s honesty never occurred to me that there are refrigerators that aren’t magnetic

6

u/faelanae 6h ago

me neither until we moved into the house and the OG fridge wasn't magnetic (which is how I ended up with steel plates hanging about)

4

u/alBashir 3h ago

Me and my wife (then girlfriend at the time) bought a house that had no appliances. When we went to buy the fridge we didn't even think of it not being magnetic. Got it installed and couldn't put any magnets on the front. Funny enough we are able to put it on the side and one side of the fridge does face out so we have a small 1.5'x2' section full of magnets

→ More replies (1)

4

u/ProbablyNotTheCat 3h ago

Sometimes stainless steel isn't magnetic. People with induction cooktops have the same problem, they need to make sure their cookware is magnetic before buying it.

2

u/i_aint_bobby 1h ago

You are technically correct, which is the best type of correct! There are some stainless steel types that are magnetic. But the overwhelming majority of stainless steel used for consumer goods (as well as industrial uses) is not magnetic.

→ More replies (1)

26

u/weapawn 17h ago

Have you thought about trying stronger magnets? Like those neodymium ones?

4

u/faelanae 16h ago

they don't work either :(

42

u/Decent-Proposal-8475 17h ago

I'm sorry, that sucks. What's your favorite magnet and can you show us

61

u/faelanae 16h ago

ironically...

7

u/Estelahe 16h ago

I also love your Moomin!

1

u/ted_mielczarek 6h ago

I have that magnet! I think it came with the plush dog when I backed the Kickstarter?

1

u/faelanae 6h ago

yes, it did!

→ More replies (1)

29

u/faelanae 16h ago

hrm. photo isn't attaching. Maybe it'll show up later. It's a "this is fine" dog.

Also have this little lighted coffee sign.

29

u/gadgetex 16h ago

It won’t attach cuz Reddit is not magnetic?

11

u/01000010-01101001 16h ago • Bravo

It may depend on whether you use dark mode‽

2

u/zlonewanderer 15h ago

Thats super cute.

12

u/scdog 13h ago

I had no idea there such such a large anti-magnet contingent until I read the comments on this post.

8

u/faelanae 12h ago

they live in pristine showroom houses where no one is allowed to carry a cup of coffee around

27

u/NameLips 16h ago

I think the main focus of his annoyance is the difference between the floor models and what was actually delivered. Why would the floor model be magnetic but not the actual product?

27

u/faelanae 16h ago

exactly. they didn't even have the black finish on the floor and after testing the stainless, I didn't think to ask.

→ More replies (1)

4

u/Substantial_Ad_3386 16h ago

They returned the fridge for a different model and forgot to check 

4

u/Subject-Act5509 15h ago

Do you plan to glue a steel plate to the fridge?

4

u/faelanae 15h ago

they're attached with velcro. Used the same plates on the first fridge, which peeled right off

1

u/leviathan65 15h ago

Why not just tape your holiday cards?

→ More replies (2)

4

u/happy2harris 13h ago

  my husband comes in and starts to put magnets on it. And they don't stick.

How many magnets did he try before noticing they didn’t stick? :-)

1

u/faelanae 12h ago

ha! fair. we did try multiple magnets. all sadge

3

u/somethingblonde 16h ago

Can't tell if the sides of your fridge are completely set into the cabinets (guessing so). If they're not, the sides of the fridge should be magnetic.

5

u/faelanae 16h ago

the sides are magnetic, but it's inset into a nook in the kitchen so not fully exposed. sticks out about two inches. I use the sides to attach a magnetic meat thermometer and a timer

2

u/3D-Cathulu 12h ago

Oh. I hadn't thought about a magnetic meat thermometer. That is a great idea.

But can we talk about "4 kinds of ice?" Does your fridge make all 4 at once? I love ice and that would make me very happy.

2

u/faelanae 12h ago

it makes three and the fourth is crushed. It makes fancy craft ice balls, mini cubes, regular cubes, and crushed. LG went all in on ice 😅

5

u/Real-Community5252 16h ago

OP, What make new fridge died immediately? I’m in the market for a non dying, magnetic fridge without fancy features

11

u/faelanae 16h ago

It didn't die exactly. It was a Frigidaire that came with a faulty fan, so kept emitting this high pitched noise. Warranty service came out a week later, replaced it and it was quieter, but still drove me crazy. We were still in the exchange window, so did that instead because I hated the door drawers layout and the freezer drawers and the veggies rotting in the drawer

3

u/No-Ice7397 15h ago

Good luck with that. They make them to die now and be insanely expensive to fix.

2

u/Dipper_Pines_Of_NY 15h ago

Find a fridge on marketplace buy it save a bunch of money. Buy it nice you buy it twice now.

2

u/revdon 13h ago edited 7h ago

Did you pay extra for the non-magnetic Mylar finish?

/s

2

u/faelanae 12h ago

$200 more. I looked into getting a fridge wrap for the previous fridge, but I thought a black-ish finish was a good compromise.

32

u/Substantial-Kick-254 16h ago

Moomins!

6

u/Critical_Thinker_535 16h ago

I thought I was the only one that noticed Moomin. Lol

4

u/sfdsquid 16h ago

I noticed it right away and commented before I scrolled. Leaving it.

3

u/Bubbasdahname 16h ago

You mentioned a black finish. It's this the picture of said black finish?

2

u/faelanae 16h ago

yeah. it's not blackblack, but it's not bright shiny stainless either

9

u/vdub2625 17h ago

I just joined the 21at century with a stainless fridge, it's magnetic (except for the glass door), I didn't realize some weren't.

2

u/Critical_Thinker_535 16h ago

Mine is magnetic all over too.

1

u/spaketto 7h ago

Me too.  Our dishwasher is also stainless steel and magnetic.   Even if you don't have kids, it's such a handy spot to put reminders, notes, grocery lists - I will have to keep this in mind the next time we need to buy a new one.

9

u/Togapi77 15h ago

i dig the moomin

9

u/Wizdad-1000 14h ago

Indeed, we replaced ours a few months ago too. Magnetic doors were a requirement. Nice workaround. 👍

14

u/Hockey-Gym 17h ago

Moomin in the wild spotted!

1

u/Firesine330 13h ago

I scrolled until I found this comment. I just couldn't let the casual Moominmagnet go.

7

u/purple_kathryn 15h ago

I didn't even know fridges came in non magnetic. Our extensive fridge magnet collection would be homeless!

3

u/OkDivide2518 17h ago

Are you infuriated with yourself?

32

u/faelanae 17h ago

only mildly

5

u/Tiki_Waka 16h ago

Moomin!

5

u/happy2harris 12h ago

I am more infuriated by the number of people in this thread providing workarounds and telling you that you don’t need to stick things to the door with magnets. 

Presumably these people live somewhere that sticking things to fridge doors is not normal. Personally if I visit someone who does n ot have photos of kids on their door, I assume they are a psycopath!

5

u/Arokthis 8h ago

20 years ago my sister moved back in with our parents. My dad bought a new fridge and SPECIFICALLY got the one that magnets wouldn't stick to so that it wouldn't get "cluttered up" with stuff my niece (then 2½ years old) drew.

4

u/originalmango 16h ago

Buy black magnetic sheets and cover part of the fridge with them using rubber cement or some other easy to remove adhesive. It’ll match better than a steel sheet.

4

u/sfdsquid 16h ago

Moomin 🥰

4

u/OftTopic 10h ago

Do you have plastic that protects the finish during shipping?

The plastic wrap on my SS finish was not noticed until the delivery team removed it.

13

u/TheMoatCalin 16h ago

They sell a magnetic adhesive sheet for that at Hobby Lobby

15

u/mjolnir76 16h ago

But it’s Hobby Lobby. 🤮

7

u/SquirrelInATux Why this is a rock and not a cheese? 16h ago

They got the same ones at Michael's, I've used them to turn bumper stickers into bumper magnets, they work great

→ More replies (1)

3

u/TheMoatCalin 16h ago

As well as white board ones that are magnetic

→ More replies (2)

1

u/VettesRUs 16h ago

Guess you should have tested this fridge….. ;)

3

u/faelanae 16h ago

I did - just not the black finish that wasn't available in the showroom

→ More replies (1)

3

u/miguel-122 16h ago

Put a magnetic whiteboard on the fridge. It will look better and you can draw on it

1

u/RGB_YCM 9h ago

Brand? Model? Cost?

→ More replies (3)

4

u/TrainingLow9079 16h ago

I'd be upset too. I love having a magnetic fridge!

4

u/SunRevolutionary7774 12h ago

Check for a thin plastic wrap.  That looks wrapped to.me

2

u/JikkaThesorus 16h ago

Not the best in terms of esthetics but you can get double sided panels on amazon (one side sticks to surfaces and the other side is magnetized). Had the same issue :(

2

u/Qiao_Di 9h ago

Gigachad moomin enjoyer.

2

u/sherlock1672 3h ago

People who design non-magnetic fridges must hate their grandparents.

2

u/DesertSpringtime 3h ago

You upgraded from stainless steel to plastic xD

2

u/ZealousidealCheck612 3h ago

Those smudges all over would infuriate me a lot more than the lack of magnets. Brand new fridge and it looks absolutely filthy already.

3

u/ChrisRiley_42 13h ago

You can buy black paint that is itself magnetic so you can stick magnets to it.

3

u/ZidaneStoleMyDagger 16h ago

Every fridge I ever saw as a kid was covered in magnets. Every single one.

None of them were ever cleaned regularly. Turns out taking down 100 magnets to clean doesn't happen very often for people. If it ever happens at all.

I had roommates for the first decade of adulthood. I lost the fight to keep the fridge magnet free so that it could be cleaned quickly and regularly.

Eventually I did get my own place with my very own fridge. Not a single magnet or taped picture on it. Easy to clean. Calming. No chaos. Beautiful.

I hung a magnetic whiteboard next to my fridge. Way easier to clean. Easier to take notes on and keep a running grocery list. Can still display a couple of my favorite magnets.

3

u/05041927 17h ago

“After testing every fridge to make sure, did not test the fridge I bought”. I see the infuriating part.

2

u/FieldBackground6116 16h ago

I hate the brushed stainless. Requires constantly cleaning or it looks terrible with finger smudges

-2

u/minus15t2 17h ago

Can I genuinely ask...

What are you sticking on your fridge that you couldn't just... Put somewhere else?

Could you not just hang the metal plates on a wall, or a cupboard door?

Why does it have to be on the fridge?

3

u/faelanae 16h ago

I have two kids. there are a lot of notices and coupons and crap. I don't like having visible clutter, but kids generate a lot of stuff. We have a whiteboard nearby and I can't keep up with clearing all the things. Our house has a bunch of curved walls, too, so not a whole lot of flat surfaces, either

4

u/GoldElectric 16h ago

contact numbers for maintenance, plumbers, electricians, and whatever.

yea you could hang a metal plate, but then you gotta buy the metal plates and drill holes, or it takes up some space on a countertop.

4

u/mlrphan 16h ago

Too bad you don’t have something that can store this information no matter where you are located. So sorry.

😂

3

u/Raterus_ 16h ago • Bravo

If only if there was an electronic device you could store numbers and notes on!

→ More replies (2)
→ More replies (28)

21

u/particlemanwavegirl 16h ago

It's a large flat surface, otherwise unused, at eye level, you really can't see how convenient it is?

→ More replies (5)

3

u/ReferenceMediocre369 8h ago

We welcome the observations of our reptilian overlord. We stand ready to assist your rapid familiarization with your new vassals.

9

u/CallMeTrouble-TS 16h ago

How many large metal surfaces do you have at your house? A dishwasher doesn’t seem right, neither does a clothes, washer or dryer. Microwave? Nope

6

u/minus15t2 16h ago

That still doesn't answer my question.. why does it have to be the fridge?

OP already has metal plates, they could literally hang those plates anywhere.

Secondly,.why does it have to be magnetics? Are you using it for notes and bills and stuff? Then a cork board or a white board will do the same thing...

7

u/CrispyJalepeno 16h ago

Nothing "has" to be on the fridge. But its easy and convenient. I want to display my wedding invites and holiday cards where I can see them. Magnets to the fridge is very easy. Attaching to a cupboard requires more than just a simple magnet. Wall space is at a premium in the kitchen area, so I don't want to put anything there unless I needed to

6

u/Scared-One9295 16h ago

The fridge is free real estate, if you put the steel plates somewhere else then you'll lose wall space to steel plates and your fridge is just sitting there uselessly keeping your food cool when it could also be a place to put fridge magnets

6

u/Khutuck 16h ago

I have a little kid. The fridge is the best place for her artwork. She can use magnets but she’s not old enough to use a cork board.

It’s a perfect r/mildlyinfuriating thing. I know “kid can’t stick pictures on the fridge” is not a real problem, but it’s still mildly annoying.

5

u/evanthx 16h ago

So why aren’t they using the huge open plain flat surface that everyone uses? You’re REALLY baffled by this?

→ More replies (2)
→ More replies (10)

2

u/akiva23 11h ago

Do people not stick stuff to the fridge these days? Mine is like "wall to wall" with slrandom shit and magnets

3

u/qalpi 16h ago

Fridges are big open spaces that are easy mounting things on with magnets. Where else would you stick things like receipts, drawings, notes etc in a kitchen? And how?

3

u/ChefMonkey2 11h ago

I like my fridge covered in stickers , ticket stubs , notes , my kids art etc …not everyone thinks minimalism, clean lines etc is the goal.

3

u/wildmaiden 11h ago

But then why "pay extra for black finish" just to cover it up in all that?

→ More replies (5)

1

u/Alt123Acct 15h ago

The kitchen is the heart of the house, mine and a lot of others have kitchen islands people hang out at or someone's always getting water or making a sandwich. So info in a super common area is great to have. Emergency numbers, calendar, notes, kids drawings, bills, lists, etc you can slap onto the fridge and everyone knows where to check for stuff. It's useful once you put a few to do lists or have reminder appointment notes and stuff you see when you get water or a snack multiple times a day. 

1

u/Trimorphic3 14h ago

the fridge is the absolutely ideal place to put these things, which is why fridge magnets were a thing. These f'ing appliance makers ought to bring back magnet-compatible fridges.

1

u/Practical_Draw_6862 14h ago

Look at Mr Wall Space over here 

1

u/IThinkRightLeft 13h ago

Cause that’s what everybody has done since refrigerators were a thing. Its the handiest and most visible place in the house for communication and reminders.

1

u/Sennten 13h ago

The fridge is the single largest and best placed piece of real estate for decoration and reminder mountings in the average house. Most people do not in fact have anywhere else they could put stuff, and they probably arent gonna be able to install a metal plate in those few locations for easy organization and remounting

1

u/AdEastern9303 13h ago

Kid’s art, cards, nephew and niece’s school photos, wedding invitation, pick up slip for dry cleaning,…

→ More replies (5)

1

u/Inner_West_Ben 16h ago

I’d be annoyed with myself too

1

u/Birds_over_people 16h ago

Modern stainless steel fridges are pretty much never naturally magnetic... they put steel plates basically like you've done but on the inside on certain parts so you can use magnets on them.

1

u/Vesalii 16h ago

Use tape to hang stuff?

1

u/Plurfectworld 16h ago

We all have phone to keep stuff easily accessible

1

u/jalvarez0907 16h ago

We just sticker bombed ours instead 😂

1

u/zrad603 16h ago

some of the manufacturers put ferrous metal behind the stainless so magnets stick.

Maybe that manufacturer used to do it, and then decided to save a few bucks.

1

u/Competitive_Prune108 16h ago

Depending on how much area you need to have for your stuff, I've also seen magnetic strips that have a channel you tuck things into

1

u/Mendinso 16h ago

Yoo, Moomin!

1

u/captainstyles 15h ago

I feel ya. The only thing magnectic on mine is the side and no one really sees that.

1

u/Ok_Staff9114 15h ago

This is super mildly infuriating. Have you tried double sided tape or Velcro tabs for the magnets? Defeats the point of the magnetism but does let you stick stuff on the fridge without adding plates.

1

u/tomvee33 15h ago

Use some command strips or suction cup clips

1

u/SpaceEngineering 14h ago

I’m just here for the Moomin.

1

u/50mmeyes 14h ago

Man I'd be so annoyed. I didn't even know there was fridges that weren't magnetic.

1

u/Glittering-War-8360 14h ago

Four types of ice, but displaying a holiday card requires aftermarket modifications. I would also be tired of looking at fridges.

1

u/Ninjaisawesome 13h ago

Stick something that is magnetic to the fridge? Surely something exists

1

u/Sipthepond 13h ago

Get some magnet paint from a craft store. Do a few coats. It works pretty good. I like magnets too.

1

u/Dull-Field2550 11h ago

Damn that sucks!!! I'm sorry OP that sounds frustrating AF.

So I have a suggestion, but I strongly suggest only doing it if you plan on keeping the fridge until you need to replace it. Get some magnetic wallpaper and wrap your fridge with it. I did it on my old fridge and I loved it! However, I did try and remove it once to correct an area and the sticky residue made me regret it haha.

1

u/Rocker-gal 11h ago

I Feel this.. my fridge is stainless and aside from the hand prints I HATE that I cant use magnets. Thank goodness my standup freezer is magnetic.

1

u/bradmatt275 10h ago

You could get those magnet sheets with adhesive on the back. It wont look as nice but since the fridge is black you probably wont notice them.

1

u/Unfair-Language7952 10h ago

My dream refrigerator was one with a non-magnetic front

1

u/SirDalavar 10h ago

Well then it's not a real fridge

1

u/NeighborhoodVast7528 9h ago

Well at least you know you have real stainless steel. Most austenitic stainless steel is non-magnetic. It is also permanently in an annealed condition, which makes forming it easier for the manufacturer.

1

u/caintowers RED 8h ago

I guess Ive been taking for granted my stainless fridge is magnetic. I hadn't even thought about it

1

u/porrpk 6h ago

moomin!

1

u/RandyTheFool 6h ago

My steel finish fridge is also non-magnetic on the front, so I just use dry-erase markers on it like a white board.

1

u/Cripplingcry 5h ago

Is that a moomin I see?

1

u/withbellson 4h ago

Ours isn’t magnetic either so we have magnets on the perimeter of the oven. It sort of works.

1

u/ComprehensivePin5577 4h ago

I hope those steel plates dont scratch that finish

1

u/DesertSpringtime 3h ago

Just put the metal plates elsewhere for the magnets. I always had magnets on the fridge but opted for integrated fridge and now have magnets on my main door that happens to be metal.

1

u/Crispynipps 3h ago

Is that a moomin?

1

u/OldOutlandishness434 16h ago

You don't HAVE to put steel plates on, that's a choice you are making. I would just mount the plates somewhere else and not mess up your new fridge.

1

u/D-Breed 15h ago

Congratulations you purchased a stainless steel fridge that actually has good quality stainless steel!

1

u/Secret-Bison9339 16h ago

You could try gumtack instead of magnets 

1

u/Fabulous-Avocado4513 16h ago

True stainless isn’t magnetic

2

u/Critical_Thinker_535 16h ago

What is a "true" stainless? There are magnetic grades out there. I work with them all the time.

→ More replies (2)

1

u/Truck_Fusk_and_Mump 15h ago

My fridge came covered in barely visible plastic wrap. Is it possible yours still has plastic on it?

7

u/branm008 15h ago

That wouldn't block a magnet doing it's thing.

1

u/Artistic-Choice9526 15h ago

Buy a whiteboard and mount it on the kitchen wall.