r/pcmasterrace • u/imbannedanyway69 • 17d ago
Hardware Since everyone is talking about not re-pasting GPUs
I bought a slightly used but otherwise stock PNY 5070Ti about a month ago now. Was running okay but I noticed the temperatures were a little high (75c even with an increased fan curve) in a very well ventilated Fractal Design R5. My previous 3070Ti had no issues in that case at all, but the 5070ti is a higher TDP card so I just put it down as more wattage more heat.
I then stumbled onto a Reddit post of someone talking about how the new 50 series cards have a hot spot temperature sensor and there are some people saying if this exceeds 15c that this is an indication your thermal paste isn't up to snuff. After updating and opening GPU-Z I noticed under load the main GPU temp sensor was reporting 75c but the hot spot was usually between 95-98c sometimes hitting 100c.
I'm not a stranger to pulling apart a card and re-pasting. It was definitely the stock thermal paste because the sticker on the backplate was still intact until I cut through it pulling the card apart. Took it apart and this is what I found. Obviously after you pull the card apart you can't see exactly how the thermal paste was laying up on the die, but the fact you can see so much of the silver die underneath the paste tells me this was definitely inadequate.
This was further proven afterwards since I re-pasted the card with thermal grizzly kryonaut it reduced the main GPU temp to 65-67c and the hot spot never goes above 80c now, and that's with the stock fan curve slightly lowered compared to it being slightly raised with the previous hotter temps.
I know people say re-pasting is unnecessary, but sometimes it isn't. If your cards temps are fine then I wouldn't mess with it, but I'm glad I pulled mine apart to keep it cool going forward. Core clocks also jumped another 50mhz or so with the same afterburner settings just from the cooler running chip.